Peachtree Audio deepblue User Manual

Wireless Music System

User Manual

Congratulaons on your Peachtree Audio deepblue purchase. We
recommend that you read this manually thoroughly so that you can
fully ulize this excing product. Please keep it for your records.

Package Content

• Main Unit × 1

•

(included) × 1

• Detachable power cord × 1

• 3.5 mm AUX IN cable × 1

•

× 1

Features

• 3.5 mm AUX IN jack to connect your MP3 player

• Bluetooth enabled to wirelessly play your music

•

For your safety, read and follow this manual carefully to ensure
proper use of the product and avoid any danger or physical damage.

®

•

items, such as newspapers, tablecloths, curtains, etc. to avoid

1

•
on the apparatus.

• Keep the appliance away from rain and any moisture. Do not

• If the product does not operate normally by following the

• When the unit is suddenly moved from a cold environment to a

warm one, if moisture forms inside it, it may not operate properly.
To correct this problem wait about one hour for the moisture to
evaporate.

• The apparatus shall not be exposed to dripping or splashing,
no
apparatus.

• Do not expose the unit under direct sunlight or nearby objects
that radiate heat to avoid damaging the unit.

• The apparatus should be used in moderate climate.

• The plug of the appliance shall remain readily operable.

•

separate the appliance from the mains.

•
the power supply. To disconnect the product from the mains
power supply, you must unplug the power cord.

• Pull out the mains plug if the appliance is not to be used over a

• Disconnect the main plug during thunderstorms.

• If the product has been dropped or damaged in any way.

WARNINGS

•

•

•

•

•

•

•

end of its service life, or during long periods of non-use.

•

•

•

•

• Replace only with the same or equivalent type.

•

IMPORTANT

Servicing -

or removing covers may expose you to dangerous voltage. Refer all

Damage Requiring Service - Unplug this product from the wall outlet

• When the power-supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the product.

If the product has been exposed to rain or water.

2 3

•

•

environmentally friendly disposal.

This Transmier must be installed to provide a separaon distance

of at least 20 cm from all persons.

CAUTION

RISK OF

ELECTRIC SHOCK

DO NOT OPEN

TOP PANEL

symbol within an
equilateral triangle is
intended to alert the
user to the presence
of un-insulated
“dangerous voltage”
within the product’s
enclosure that may

magnitude to

electric shock to
persons.

For indoor use only.

earth provided.

WARNING: TO
REDUCE THE RISK OF
ELECTRIC SHOCK DO
NOT REMOVE COVER
(OR BACK), NO USER
SERVICEABLE PARTS
INSIDE REFER
SERVICING TO
QUALIFIED SERVICE
PERSONNEL.

point within an
equilateral triangle
is intended to
alert the user
to the presence
of important

maintenance
(servicing)

the literature
accompanying the
appliance.

1

2

FRONT PANEL

4

REAR PANEL

6

7

3

5

• Power supply: AC 100 – 240 V, 50 / 60 Hz

•

•

140 W

3 V (1 × CR2025)

• Output power: 240 W max.

•

•

®

0.45 W
10 meters open air

• AUX IN jack: 3.5 mm

• Bluetooth version: V 2.1 +EDR

4 5

1.

2. (Volume down)

3.

(Volume up)

4. AUX (Green) / Bluetooth

5. Remote sensor

6. AUX IN jack

7. AC Socket

®

(Blue) / Standby (Red) indicator

REMOTE CONTROL

To power the player ON:

8. Power

148

9. Bluetooth

® switch

10. Mute

159

1610

1711

1812

11. Previous

12. Bass+

13. Bass-

14. PAIRING

15. AUX switch

1913

16.

Play / Pause

1. Plug AC cord into AC jack, and plug into a live AC wall outlet.

2. Press the [
or the [

Power ]

player to ON mode.

3. Press and hold the [
top panel for 1 to 5 seconds or press the [

Power ]

remote control to switch the player to Standby mode.

Note: To save power, the player will switch to economic standby mode
when the speaker is idle for 12 hours.

REMOTE CONTROL BATTERY

1.

2.

3.

4.

17. Next

18. VOL+ (Volume up)

19. VOL- (Volume down)

®

Before your start:
Your Bluetooth device (cellphon e, MP3 player, computer, etc.)

®

®

please refer to your Bluetooth device’s user manual for details on

®

Bluetooth pairing / searching / setup

Pairing your Bluetooth device with the player

1.

Press and hold the [

®

®

to set the device’s

mode.

top panel for 5 seconds or the [ PAIRING ]

Please Note: Maximum broadcast distance for Bluetooth in open
space is typically 33 feet. Walls and other obstrucons may reduce
this distance significantly

6 7

LED Status:

͵

Flashing quickly – No device paired

͵

Flashing Slowly – Device pairing

͵

Steady ON – Device paired

Once the device is paired the blue light will turn off aer 15

seconds

®

1. If you are using a smartphone as your source the audio playing will be

interrupted when there is an incoming call or when the user makes
a call.

finished.

2.
manual to link to the player. Typically, Bluetooth controls are

3. Search the device name “Peachtree BT ” on your Bluetooth device

listed

and select it as your audio speaker.

®

®

®

®

4.

is established.

5. Pairing remains intact even when the player or the Bluetooth

®

auto link with the last linked device when that device is in range.

Note:

®

If the pairing is unsuccessful, re-pair your Bluetooth® device with the
player and repeat the above steps.

Pairing your other Bluetooth

® device

Previously Paired Devices:

Bluetooth® device, press and hold the [

[ PAIRING ]

the remote control for 2 seconds and repeat the above steps for
pairing your other Bluetooth®.

Pl

aying Bluetooth

® Music

1. Once your device and the player are linked you can start to play
Bluetooth

2. Turn on the player and press the [

® music through the player.

[ Bluetooth® ]

control to select the Bluetooth®mode, Blue light indicates for
Bluetooth® mode.

3.
Bluetooth®-enable device.

NOTE: Depending on the Bluetooth

® device you are using, you may

need to manually go into media player mode on your device to control

4. Press the [

]

5. Press the [ ]

immediately to skip the previous track.

6. Press the [ ]
Press again to resume it.

/ ]

7. Press the [

/ ]

[

on

adjust the system volume.

Note:

®

8 9

1. Connect a sound source with a Line or headphon e analogue output
to play through your player as below hookup diagram shown.

2. Press the [
or press the [ AUX ]
AUX mode. Green light indicates AUX Mode also.

3. Set your personal audio player / computer to PLAY.

Headphone socket

3.5 mm jack cable
(included)

• iPhone / iPad / iPod models

• MP3 players

• CD walkman players

• Tape walkman players

• Personal computers or laptops

No

te:

at maximum volume output level. Therefore, if the unit randomly
stops playing the music or becomes distorted, move the volume level
to minimum and wait for a while. The user can try to move up the

PROBLEM SOLUTION

Ensure that the Power Switch of wall socket is

There is no power
to the player

Ensure that the AC plug is securely connected
to the player and proper wall outlet.

your iPhone® / iPad® / iPod®.

Make sure your device is working properly.
Check your device’s manual for details on

Trouble pairing
device / computer
with the player

Bluetooth pairing and lin king.

Make sure your device supports the A2DP

®

linking / pairing. The pl ayer defaults to the
last linked device, so a new device may
need to be linked by press and hold the

[

pairing other device.

iPod®, iPhone®, and iPad® are trademarks of Apple Inc., registered in the U.S. and other countries.

10 11

Recycling

and electr

be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling

electronic equipment.

Net weight: 6.3 kg

WARRANTY : 1 year parts and labor when used under normal

Please contact Peachtree Audio at 704.391.9337 or email us at
[e-mail] with a

onic equipment (WEEE). This means that this product must

vered under our warranty.

12

This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, this is no guarantee that interference
will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

on, the user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna;

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected;

• Consult the dealer or an experienced radio/TV technician for

responsible for compliance could void the user’s authority to operate
the equipment. Where shielded interface cables have been provided

This Class B digital apparatus complies with Canadian ICES-003.

Peachtree Audio

2405 120th Avenue NE

Bellevue, WA 98005

704.391.9337

www.peachtreeaudio.com

Service: 704.391.9337

FCC ID: VWPKW-B25BT

The Bluetooth® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc., and any

use of such marks by Signal Path International is

13

under license.