Peaceful Breeze 681 Instructions Manual

5 Stage HEPA Air Purifier

MODEL 681

Please read and save these instructions.

Distributed by: Asthma Freedom, Inc., 3845 Tonawanda Creek Road, E. Amherst, NY 14051

Phone: 716•688•5922 • Fax: 716•688•5922

Thank you for choosing Peaceful Breeze™.

www.peacefulbreeze.com

◆ Important Safety Instructions

This product has been designed and manufactured in consideration of life safety.

WARNING

Before installing this product, carefully read all installation and operation instructions. Failure to follow the
important safety instructions listed below may result in personal injury or property damage. Do not operate this
product with a damaged cord or plug. If this product malfunctions, is dropped or appears damaged in any way,
return the complete product to the place of purchase for inspection, repair and/or replacement.

1. ALWAYS operate the unit from a power source using the same voltage, frequency and rating as indicated

on the product identification plate.

2. This product is not a toy. Close supervision is necessary when the unit is used near children or disabled
individuals.

3. DO NOT operate this product with a damaged cord or plug. If the purifier malfunctions, is dropped or
appears damaged in any way, return the complete unit to the place of purchase for inspection, repair
and/or replacement.

4. To reduce the risk of electrical shock, DO NOT expose the unit or power cord to water.

5. When product is not in use, being assembled, disassembled or cleaned, switch off power and unplug cord
from outlet.

6. DO NOT place objects on the product. Never allow objects to obstruct the inlet or outlet openings. DO
NOT operate unit near walls or curtains.

7. Use only accessories or attachments designed specifically for this unit. Use of attachments or accessories not
recommended for this product may result in personal injury or property damage and may void warranty.

8. This product is intended for residential use only.

9. DO NOT attempt to disassemble the unit other than to replace filters or fragrance cartridge.

10. DO NOT place the unit on a metal surface.

11. DO NOT use the unit in artificially hot or humid conditions. Never allow it to be used in any hazardous
environment.

12. Keep unit out of reach of children.

13. DO NOT clean the machine with organic solvents.

14. For optimal performance, place the unit 3 feet (90 cm) above floor level. In carpeted areas, the unit should
NEVER be used at floor level.

15. For rapid air purification, set unit on “High”, then turn to lower speed after 30 minutes. When the unit is
being used at night, set the speed at “Low” to keep the air fresh and clean.

16. NEVER wash the HEPA Filter. The filter is not washable and doing so will cause damage.

— 1 —

Please read and save these instructions.

◆ Main Features

1. Purification Function:
This purifier is equipped with a filter system, which consists of a washable pre-filter and a HEPA
filter using activated carbon. The HEPA filter captures 99.97% of airborne particles as small as .3
microns. The filter system can eliminate smoke, harmful gases (formaldehyde, carbon monoxide,
etc.) and odors, as well as eliminate harmful bacteria in the air, thus reducing air pollution and
improving air quality in the home.

2. Negative Ion Function:
Negative ions (≥3.5x10

6

ions/cm3) are discharged to combine with dust, bacteria and mildew in

the air, eliminating them.

3. Sterilization Function: (available upon request)
The herbal sterilization filter is made from herbs by distilling their natural components, which have
broad-spectrum antibacterial effects and can restrict the growth and reproduction of gram-positive
bacteria and gram-negative bacteria.

4. Fragrance Emission Function: (optional)
Unit is fitted with an optional fragrance emission function. Either a canned fragrance system or
essential oil additive system is available. The unit can also be operated without fragrance.

5. Other Functions:

• Negative Ion Indication: The ION pattern indicator illuminates in the screen while the purifier

generating ions.

• The HEPA Replacement Indicator Light will illuminate after approximately 8000 hours of use.

After replacing the HEPA filter, insert a needle into the reset unit on upper right of the fixing
frame, the HEPA replacement indicator light will turn off.

• Air Pollution Detection: After 24 hours, the air pollution detector is at its optimum state. When

air pollution is severe, the API (Air Pollution Indicator) will illuminate and the unit will
automatically increase its setting (e.g. L->M or M->H) speed to purify the air.

• Remote Control: Remote control distance ≤ 16’ (5m).

• 3 Speed Settings: H, M, L

• Timer: 2h, 4h, 8h

— 2 —