PDR Mounts UCMM50 User Manual

Mounts by

A division of David Engineering & Mfg. Inc.

Model

UCMM50 UNDER CABINET MONITOR MOUNT

Thank you for purchasing the PDR monitor mount with the exclusive “Bayonet locking system”

To ensure the correct usage, please read and follow the instructions

All PDR mounts and adapters carry a limited lifetime warranty against defects in material and workmanship. We are not liable
for improper installation that results in damage to mounts, adapters or presentation equipment.

Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.

To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to
withstand the weight of both the monitor and the mount.

Special techniques are necessary for installation of the panel display mount.

manual thoroughly. Please store the instructions in a safe place

for future reference.

! Suitable for displays with 75mm &

Features

100mm VESA mounting pattern

! Simple to adjust no tools required
! 2”Adjustable height from 6.8” to 8.8”
! 100 deg tilt and 360 deg.

rotation

! Quick monitor removal with exclusive

Mounting plate

Quick disconnect lever

Height adjuster

View angle adjuster

Wood screw

Monitor mounting screw

Projector wall mounting application fig 2

Mounting hardware

360 deg Rotation

1

INSTALLATION LOCATION

The cabinet where the mount is to be installed must be capable of long-term support of
the total load of the monitor and mount. Measures should be taken to ensure sufficient
strength to withstand the force of earthquakes , vibrations and other external forces.

Note:

water is possible. These can result in fire or electric shock.

Incorrect installation can cause the projector mount to fall and cause injury.

Total load of the mount ( monitor + Mount)

Maximum weight - 20 Lbs ( 10Kg.)

Avoid installing in locations where the temperature and humidity are excessively high, and where contact with any

WARNING

CAUTION

Do not install in locations where there is excessive vibration or impact. Injury and damage could result from the monitor mount
falling.

.

.

WARNING

Use the specified screws in the specified places and tighten firmly. Failure to do this could cause injury if the monitor.
mount falls.
Do not alter any of the parts. Do not use broken parts. This

C A U T I O N : I N S TA L L A T I O N O F U N I T I S T O B E C A R R I E D O U T B Y Q U A L I F I E D T E C H N I C I A N S O N L Y . I N S T A L L I N
A N A P P R O P R I AT E L O C A T I O N B Y C H E C K I N G T H E S T R U C T U R E A N D D U R A B I L I T Y F O R S A F E T Y A N D
A C C I D E N T P R E V E N T I O N .

could result with injury due to the monitor mount falling. .

.

.

2