PDR Mounts MDWM50 User Manual

Mounts by

A division of David Engineering & Mfg. Inc.

Model

MDWM50 MONITOR DISPLAY WALL MOUNT

Thank you for purchasing the PDR monitor mount with the exclusive “Bayonet locking system” (patent applied for)

To ensure the correct usage, please read and follow the instruction

All PDR mounts and adapters carry a limited lifetime warranty from ship date against defects in material and workmanship.
We are not liable for improper installation that results in damage to mounts, adapters or presentation equipment.

Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.

To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to
withstand the weight of both the monitor and the mount.
Fully tighten all of the mounting screws as specified in the instructions.

Special techniques are necessary for installation of the panel display mount.

manual thoroughly. Please store the instructions in a safe place

for future reference.

! Suitable for displays with 75mm &

Features

100mm vesa hole pattern

! Simple to adjust no tools required
! Pitch and yaw adjustments, and 360

deg. rotation

! Quick monitor removal with exclusive

“Bayonet locking system”

Mounting plate

Mounting hardware

Wall anchors 4 pcs

Monitor mounting screw 4 pcs

360 deg Rotation

Projector wall mounting application fig 2

Quick disconnect lever

1

INSTALLATION LOCATION

The wall where the mount is to be installed must be capable of long-term support of the
total load of the monitor and mount. Measures should be taken to ensure sufficient
strength to withstand the force of earthquakes , vibrations and other external forces.

Note:

water is possible. These can result in fire or electric shock.

Incorrect installation can cause the monitor mount to fall and cause injury.

Total load of the mount ( monitor + Mount)

Maximum weight - 20 Lbs ( 10Kg.)

Avoid installing in locations where the temperature and humidity are excessively high, and where contact with any

Do not install in locations where there is excessive vibration or impact. Injury and damage could result from the monitor mount
falling. .

.

WARNING

CAUTION

.

.

.

.

.

WARNING

Use the specified screws in the specified places and tighten firmly. Failure to do this could cause injury if the monitor.
mount falls. .
Do not alter any of the parts. Do not use broken parts. This

.

C A U T I O N : I N S TA L L A T I O N O F U N I T I S T O B E C A R R I E D O U T B Y Q U A L I F I E D T E C H N I C I A N S O N LY . I N S TA L L I N
A N A P P R O P R I AT E L O C AT I O N B Y C H E C K I N G T H E S T R U C T U R E A N D D U R A B I L I T Y F O R S A F E T Y A N D
A C C I D E N T P R E V E N T I O N .

could result with injury due to the monitor mount falling. .

.

Rev 120507

2