Page 1
Document Number: PD196-328R2
PDI-P19A
Arm-Mounted, Healthcare-grade
LCD Monitor with Android
Page 2
™
MODEL:
Document Number:
Page 2 of 15
Your Source for Healthcare and
Wellness Infotainment
PDI-P19A
LCD Monitor with Android Quick Start Guide
PD196-328R2
Limited Warranty
PDi Communication Systems Inc., (“PDi”) warrants, to the original purchaser only, that the product will be free from defects in materials and
workmanship, under normal use, for 2 years from the date of original purchase. This warranty does not cover any other equipment that
may have been included with PDi’s shipment of this product.
After receipt of written notice of a defect or malfunction occurring during the warranty period, PDi will repair or replace goods returned to its
Springboro, Ohio location, at its discretion, the whole or any component part of any product manufactured by PDi and found by PDi to be
defective. If the decision is made to replace the product, PDi will exchange the model for the same model or a model similar in form and
function.
As a condition to obtaining warranty service, written notification of the defective product must be received by PDi within ten (10) days of
noticing the defect. Repair of said product requires it to be shipped to the PDi factory in Springboro, Ohio. All shipments shall be F.O.B.
Springboro, Ohio, and all shipping and freight charg es to PDi’s factory shall be paid by the customer.
For information regarding authorized servicing and all other information pertaining to this warranty, please contact PDi COMMUNICATION
SYSTEMS at 40 Greenwood Lane, Springboro, Ohio 45066 or phone 800-628-9870 and ask for Service.
This warranty gives specific legal rights and you may also have other rights which vary from state to state.
Exclusions from Warranty
• Products damaged by any catastrophe, accident, or from neglect, misuse, fault, improper assembly, improper ma inte nan c e,
inadequate return packaging, or negligence by the customer or any third party. They will be treated as out of warranty for external
cause to the Products, such as, but not limited to, failure of or faulty electric power, air condition ing, operator error , fai lur e or
malfunction of any data communications system. Such conditions will be determined by PDi at its sole unfettered discretion.
• Service and repair of accessories, apparatus, attachments or any other devices which are not PDi products or options.
• Defacing of product, revision control and PDi labeling (label alterations, serial number missing, serial number no longer discernible
and serial number invalid). All serial numbers are recorded and tracked for warranty purposes.
• Unauthorized changes, modifications or alterations in or to the Products not installed by PDi.
• Damage to or loss of any programs, data, or removable storage media.
• Damage incurred during installation, relocation or removal of the Products or any accessories, apparatus, attach me nts or other
devices.
• Normal wear.
• The furnishing of accessories or supplies.
• Damage by shipping carrier.
• Incompatibility issues.
• Damages of any kind including, but not limited to, direct or indirect damages, lost profits, lost saving, or other special incidental,
exemplary or consequential damages whether for breach of contract, tort or otherwise, or whether arising out of the use of or
inability to use the product, even if PDi or any distributor, dealer, or authorized service provider has been advised of the possibility
of such damages, or any claim by any other party
• Damage caused by any software or application not installed at the factory.
PDi’s liability under this warranty is limited to repair or replacement of defective products and parts as provided above. PDi shall not be
liable for incidental or consequential damages.*
The warranty contained herein is in lieu of all other expressed or implied warranties, including any implied warranty of merchantability or
fitness for any particular purpose. PDi neither assumes nor authorizes any person to assume, on its behalf, any other obligation or liability.
*Some states do not allow the exclusion or limitation of incidental or consequential damages or a disclaimer of warranties implied by law,
so the above limitation or exclusion may not apply.
The information and technical data in this manual is believed accurate, but is not warranted and is subject to change without notice or
obligation. PDi reserves the right to change this policy without advance notice.
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Page 3
™
MODEL:
Document Number:
Page 3 of 15
Your Source for Healthcare and
Wellness Infotainment
PDI-P19A
LCD Monitor with Android Quick Start Guide
PD196-328R2
Overhead Falling Hazard
WARNING: To prevent injury, this apparatus
must be securely attached to the floor/wall in
accordance with the installation instructions.
Monitor can pose a striking hazard when
mounted at an elevated position. Use only PDi
mounting brackets, support arms, and
appropriate hardware to assure Monitor will not
fall from the mounted position
Rain and Moisture
WARNING: To avoid the hazards of fire or
electrical shock, DO NOT expose this television
to rain or moisture.
Oxygen Environment
WARNING: Do not use in any oxygen tent or
oxygen chamber. Such use may cause a fire
hazard.
Note to Cable TV Installer (If applicable)
This reminder is provided to call the cable TV systems
installer’s attention to Article 820-40 of the National
Electrical Code. The code provides guidelines for proper
grounding
and, in
particular,
specifies
that the
cable
ground
shall be
connected
to the
grounding
system of the building, as close to the point of
the cable entry as practical. Canadian installations shall be
properly grounded in accordance with the Canadian
Electrical Code, Part 1.
FCC
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
reasonable protection against harmful interference when
the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equ ipm ent in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
Maintenance and Servicing
The Monitor does not require period ic mainte nance other
than cleaning. Never remove the back cover of the
Monitor; this can expose you to high voltage and other
hazards. If the Monitor does not operate properly, unplug it
and call an authorized service center or PDi.
Cleaning and Disinfection
Clean the exterior of this monitor by removing dust with a
lint-free cloth. Suggested cleaning agent is 5% Bleach and
Water solution. CAUTION: To avoid damage to the
surface of the monitor, do not use abrasive or chemical
cleaning agents. Spot test a new disinfectant by test
cleaning a non-obvious smal l spot on the Monitor’s back
cabinet, keypad, and LCD panel. Allow the disinfectant to
soak per its instructions and then wipe clean. Do not use
the disinfectant if the Monitor’s surfaces show any sign of
discoloration or softening.
Product Modification
Do not attempt to modify this product in any way without
written authorization. Unauthorized modification could void
the user’s authority to operate this product.
Copyright, Trademarks
© 2014 PDi Communication Systems, Inc. All rights
reserved. PDi-TAB® is a registered trademark of PDi
Communication Systems, Inc. Product logos, brands and
other trademarks displayed within PDi’s products are the
property of their respective trademark holders, who are not
affiliated with, endorsing, or sponsoring PDi Communication
Systems, Inc. or our products.
Underwriters Laboratories
Page 4
™
MODEL:
Document Number:
Page 4 of 15
Your Source for Healthcare and
Wellness Infotainment
LCD Monitor with Android Quick Start Guide
The model PDI-P19A Healthcare Grade LCD
Monitor is a specialized monitor and should be
installed to National Electrical Code specifications.
This device is safety tested and listed by the
Underwriters Laboratories as a product suitable for
use in health-care facilities in both the United States and
Canada.
Disclaimer
The author and publisher h ave used their bes t effor ts
in preparing this manual. PDi Communication
Systems, Inc. m akes no representation or warranties
with respect to the accura cy or completeness of the
contents of this m anual a nd s pecif ic all y dis cla ims any
implied warranties or merchantability or fitness for
any particular purpos e and shall in n o event be liab le
for any loss of profit or any other damages. The
information contained herein is believed accurate, but
is not warranted, and is subject to change without
notice or obligation.
PDI-P19A
PD196-328R2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Page 5
™
MODEL:
Document Number:
Page 5 of 15
PDI-P19A
PD196-328R2
Your Source for Healthcare and
Wellness Infotainment
LCD Monitor with Android Quick Start Guide
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: THIS INSTALLATION SHOULD BE MADE BY A
QUALIFIED SERVICE PERSON AND SHOULD CONFORM TO
ALL LOCAL CODES. READ AND FOLLOW THE SAFETY
INSTRUCTIONS BEFORE ATTEMPTING THIS I NSTALLATION.
1. Read Instructions – All the safety and operating instructions
should be read before the product is operated.
2. Keep these Instructions – The safety and operating
instructions should be retained for future reference.
3. Heed all Warnings – All warnings on the product and in the
operating instr uc tions sho uld be adher ed to.
4. Follow all Instructions – All warnings on the product and in
the operating instructions should be followed.
5. Water and Moisture – Do not expose this product to rain or
moisture. Do not use this product near water – for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basem ent; or nea r a swimming poo l; and the l ike.
6. Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Clean only with a dry cloth.
7. Ventilation – Slots and openings in the cabinet are provided
for ventilation to ensure reliable operation of the product and
to protect it from overheating. These openings must not be
blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar
surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions
have been adhered to.
8. Heat – The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
product s (including amplifiers) th at produce heat.
9. Power-Cord Protection – Protect the power cord from being
walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the product.
10. Attachments – Only use attachments/accessories specified
by the manufacturer.
11. Use only with cart, stand, tripod, bracket,
or table specified by the manuf acturer, or
sold with the apparatus. When a cart is
used, use caution when moving the
cart/apparatus combination to avoid injury
from tip-over.
12. Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
13. Servicing –Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged
in any way, such as power cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
14. Oxygen Environment – Do not use in an oxygen tent or
oxygen chamber. Such use may cause a fire hazard.
15. To prevent injury, this apparatus must be securely attached
to the wall in accordance with the installation instructions.
TV’s can pose a striking hazard when mounted at an
elevat ed level.
16. Power Sources – This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to t he operating instructions.
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
CONSIGNES DE SÉCURITÉ IMPORTANTES
CETTE INSTALLATION DOIT ÊTRE EFFECTUÉE PAR UN
TECHNICIEN QUALIFIÉ ET DOIT ÊTRE CONFORME À TOUS
LES CODES LOCAUX. LIRE ET SUIVRE LES CONSIGNES DE
SÉCURITÉ AVANT DE PROCÉDER À L’INSTALLATION.
1. Lire ces instructions.
2. Conserver ces instructions.
3. Respecter tous les avertissements.
4. Suivre t outes les instruct ions.
5. Ne pas utiliser cet appareil près de l'eau - par exemple près d'une
baignoire, d'un lavabo, dans un sous-sol humide, ou près d'une
piscine ou similaire.
6. Nettoyer avec un chiffon sec. Ne pas utiliser de nettoyants
liquides ou en aérosol.
7. Ne pas obstruer les ouvertures de ventilation. Installer
conformément aux instructions du fabricant. Les ouvertures ne
doivent jamais être obstruées en plaçant le produit sur un lit, un
canapé, un tapis ou toute autre s urface sim ilaire.
8. NE PAS installer près de sources de chaleur telles que radiateurs,
registres de chaleur, poêles ou tout autre appareil (y compris les
amplificateurs) qui produit de la chaleur.
9. NE PAS neutraliser le dispositif de sécurité de la fiche polarisée
ou de terre. Ce produit est équipé d'une prise de terre à trois fils,
une fiche ayant une troisième broche (mise à la terre). Cette fiche
ne peut s'insérer que dans une prise de courant avec mise à la
terre. Il s'agit d'une caractéristique de sécurité. Si vous êtes
incapable d’insérer la fiche dans la prise, contacter votre
électricien pour remplacer votre prise obsolète.
10. Protéger le cordon d'alimentation pour qu’il ne soit pas piétiné ni
pincé, en particulier au niveau des fiches, des prises de courant et
au point de sortie de l’appareil.
11. Accessoires - Utiliser uniquement les attaches/accessoires
recommandés par le fabricant.
12. Utiliser uniquement avec un chariot, stand, trépied, support ou
table recommandé par le fabricant ou vendu avec l'appareil.
Lorsqu’un chariot est utilisé, faire attention lors du déplacement
de l'ensemble chariot/appareil afin d’éviter des blessures en cas
de basculement.
13. Débrancher cet appareil en cas d'orages ou lorsqu'il reste inutilisé
pendant de longues périodes.
14. Confier toute réparation à un personnel de service qualifié. Des
réparations sont nécessaires si l'appareil est endommagé d'une
façon quelconque, par exemple : cordon ou prise d'alimentation
endommagé, liquide renversé ou des objets sont tombés dans
l'appareil, l'appareil a été exposé à la pluie ou à l'humidité, ne
fonctionne pas normalemen t ou s'il est tombé.
15. Sources d'alime ntatio n - Ce produit doit être utilisé uniquement à
partir du type de source d'alimentation indiqué sur l'étiquette. Si
vous n'êtes pas sûr sur le type d'alimentation de votre domicile,
consultez le détaillant de votre produit ou la compagnie
d'électricité locale. Pour les produits proposés de fonctionner par
piles, ou autres sources d’alimentation, reportez-vous aux
consign es d’util isation.
16. Environnement d’oxygène - Ne pas utiliser sous une tente à
oxygène ou chambre à oxygène. Une telle utilisation peut causer
un risque d'incendie.
Page 6
™
MODEL:
Document Number:
Page 6 of 15
Fig. 1
Fig. 2
MAC ID
WIFI ID
Your Source for Healthcare and
Wellness Infotainment
PDI-P19A
LCD Monitor with Android Quick Start Guide
PD196-328R2
ARM MOUNTING
This monitor is designed to attach to a wall mounted suspension arm adjusted to support a monitor weighing
twelve pounds (For example: PDI-AA412-XY Series).
The single coaxial cabl e on top of the Monitor is used to supp ly low voltage AC or DC power (28 VAC or 24VDC)
and the RF signal to the monitor.
Note: Contact PDi for additional information on arm compatibility and cable requirements.
DANGER: ARM RECOIL HAZARD
The safety brake pin must remain in the SAFET Y BRAKE PIN HOLE whene ver the monitor is
removed from the arm or when the ar m is rem oved from the wal l brack et to pr event the arm fr om
springing open.
1. Slide the Monitor assembly onto the nose of the arm as shown in Fig. 1.
2. Secure PDISHCS252075 bolt with a 5/32” Allen wrench and make coax cable connec tions as shown in
Fig. 2
MAC ID LABEL
The MAC ID label will be located on the back cover of the unit next to the Android operating instructions label.
This will be specific to the unit.
WIFI ID LABEL (If Applicable)
The WIFI ID label will be located on the back cover of the unit next to the MAC ID label. This will be specific to the
unit.
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Page 7
Wellness Infotainment™
MODEL:
Document Number:
Page 7 of 15
Your Source for Healthcare and
PDI-P19A
LCD Monitor with Android Quick Start Guide
PD196-328R2
ANDROID PROGRAMMING
Enter SETUP MODE/Sources/Source Enable, make sure monitor is set at Enabled/No APO and the
Android-Module is enabled.
*The first time you use the android portion of the P19A Monitor, you will enter the WELCOME screen.
1. This will be a New User Screen where you will be asked to enter a pin number.
2. Entering the PIN will take you to the desktop.
Note: If your power On So urce is set to Andr oid – Module, a short touch of the power butt on puts th e andro id to
sleep (or wakes it up if it was sleeping).
A long touch of the power button reboots the android.
Signing On As a New User (Device Cleanup)
(*Administrative information like Wi-Fi and clone file configuration is retained)
In the initial pat ient s etup , the patient needs to touch the create account button.
Enter the new user name (you may use the default name Patient) and touch Done. Touch Continue (new user)
and wait for the WELCOME Screen.
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Page 8
Wellness Infotainment™
MODEL:
Document Number:
Page 8 of 15
Your Source for Healthcare and
PDI-P19A
LCD Monitor with Android Quick Start Guide
PD196-328R2
After touching Continue on the WELCOME screen you need to enter a security code. This code must be at least 6
digits.
Confirm your code and touch Next when done.
SETTINGS – WIRELESS AND NETWORKS
After confirming your security code, yo u can enter the Settings screen where you can adjust network, sound, and
account settings, among many others.
1. From the home screen, touch the all apps icon at the bottom of the screen.
2. In the all apps screen, select Settings.
Note: If you are connected using the Ethernet cable, you will not be taken to the next screen. Instead, you wi ll be
taken to the default home screen.
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Page 9
Wellness Infotainment™
MODEL:
Document Number:
Page 9 of 15
Your Source for Healthcare and
LCD Monitor with Android Quick Start Guide
Connect To Wi-Fi Networks
1. Slide the Wi-Fi switch to the On position.
(If not already set to “on”)
2. The tablet scans for available Wi-Fi networks and
displays the names of those it finds. Secured
networks are indicated with a .
PDI-P19A
PD196-328R2
3. If the tablet finds a network that you connected to
previously, it connects to it.
4. Touch a network name to see more details or
connect to it, and type a security code if
necessary.
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Page 10
Wellness Infotainment™
MODEL:
Document Number:
Page 10 of 15
Your Source for Healthcare and
CLONING INFORMATION
Cloning the android portion of the monitor must be performed separately. The cloning for the android will be from
a cable connection in the swivel portion of the monitor.
1. From the android home sc reen, touch the All A pps
Note: Default home screen is for illustration purposes
only and may be different for your device.
2. In the All Apps screen, touch the Clone icon.
Master Configuration Instructions
Option 1: Set up this de vic e as a s er ver; con tin ue t o the
next steps.
Option 2: Slave configuration page 14
You will now have the cloning screen
3. To use this device to ge ner at e cl one dat a, t o uch
4. Follow Master setup information by sliding the
PDI-P19A
icon .
You may be prompted for a security code by the
security application.
Master.
screens and entering information.
LCD Monitor with Android Quick Start Guide
PD196-328R2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Page 11
Wellness Infotainment™
MODEL:
Document Number:
Page 11 of 15
Your Source for Healthcare and
PDI-P19A
LCD Monitor with Android Quick Start Guide
PD196-328R2
(STEP 1)
Create Master Device
If you are not ready to clone at this time, you can come back to this screen once you are ready to clone your
changes.
If you wish to create a master device now, then slide the screen or use tabs at the top of the screen
Note: The checking options are disabled in this screen.
(STEP 2)
Choose file and save
Touch Enter filename here… and you will be able to type
your desired file name.
Touch Save clone data to file to start saving the clone
data.
If the file name you have chosen already exists, then you
will be presented with the file already exists screen.
Touch OK if you want to overwrite the existing file or touch Cancel to choose a different file name.
Note: The default file name is clone.ab
While the device is being cloned, you will see the screen
to the right. The time taken will depend on the number of
applications and the size of files.
DO NOT TOUCH the screen during this process.
Note: The clone data file will be saved under
“/sdcard/admin/master/files/” folder.
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Page 12
Wellness Infotainment™
MODEL:
Document Number:
Page 12 of 15
Your Source for Healthcare and
(STEP 3)
Set Sharing Scheme (Optional)
See Option 1: to use this device as an ftp server.
See Option 2: to use another device as a clone data server.
Option 1:
If you want to use this device as a clone file server,
keep the checked option as shown and follow the next
two steps.
Note: The device network name and device ip address
are not editable.
FTP Server configuration
Select the SD card Tab and browse the admin folder.
You should be able to see the clone files you save under
SDcard/admin/master/files
LCD Monitor with Android Quick Start Guide
1. Touch Go to file server to set up the ftp
server. If prompted by the app locker,
please enter your security code.
2. Confirm and save slave config file
(applicable for auto cloning and will be
available in future release)
PDI-P19A
PD196-328R2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Page 13
Wellness Infotainment™
MODEL:
Document Number:
Page 13 of 15
Your Source for Healthcare and
LCD Monitor with Android Quick Start Guide
PDI-P19A
Slide to the ftp server tab.
You will see your network status and an icon labeled Start Service
Touch Start Servic e to start the ftp server on this
device.
If you see the icon l abel No Wi-Fi-Network please
check your network connection.
Note: The ftp server will work only on a Wi-Fi
connection.
Note: The ftp server will have to be manually restarted when the device reboots.
Touch the back arrow to go back to the cloning
application screen.
The Confirm and save slave config file takes you to
the Slave configuration setup.
Make sure the entries are in Green. This means the
host is reachable and the file is available.
You may also use this information for manual slave
set-up.
Congratulations, your master clone setup is complete!
Step 4: Summary
Touch All Done to exit the cloning application
PD196-328R2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Page 14
Wellness Infotainment™
MODEL:
Document Number:
Page 14 of 15
Your Source for Healthcare and
Option 2:
If you do not want to use this device as a clone file server,
uncheck the check box next to This device is a server
Slide to the next screen.
Congratulations, you have saved your master clone data
file!
You have not chosen this device to serve the clone data
files.
For dynamic cloning you would need to put the clone data
file on a server. You can then use that server information
for the slave configuration file - See the section on Slave
Configuration for details.
Touch All Done to exit the cloning application.
Slave Configuration
To Clone from the clo ne data (saved in previous section)
to another P19A, follow the step s below.
From the android home screen, tap the icon.
1. In the All Apps screen, press the Clone icon.
2. Choose Slave to enter configuration setup.
PDI-P19A
LCD Monitor with Android Quick Start Guide
PD196-328R2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Page 15
Wellness Infotainment™
MODEL:
Document Number:
Page 15 of 15
Your Source for Healthcare and
Enter the information of the Master Clone file on this screen.
Make sure the entries are in Green. This means the
host is reachable and the file is available.
Touch Done to save the slave config file. This device
will be cloned on next new user.
To clone this device now (and also for future users of
this device) touch the Clone this device button.
(You will see bottom screen)
Note: Check the box next to Check for updates to the
clone file… if you want the clone device to check for
updated file on a new user.
When cloning is complete, the monitor will return to the
home (cloned) screen.
Micro USB Cable
PDi-TAB devices have a micro USB cable that is mounted inside the nose cover extending from the neck of the
unit. This cable allows service personnel to provide offline updates to the Android firmware. In addition, this
cable and the USB port it is attached to, support the USB On-The-Go (OTG) standard, which allows the
connection of external devices such as flash drives and keyboards. The devices that attach to this cable along
with any other external cabling must also support the USB OTG standard along with being supported by the
Android firmware. For instance, if a flash drive is attached, (ex: Sandisk BN140600028 supporting FAT32, NTFS,
or EXT file systems) any pictures on the device will appear in the Gallery.
Note: Microsoft’s exFAT file systems found on flash drives greater than 32 GB by default and Mac OS file
systems are not supported by the PDi-TAB.
Additional Information
Additional information is available in the user manual. You can access this information online at
http://www.pdiarm.com/, document number PD196-329.
PDI-P19A
LCD Monitor with Android Quick Start Guide
PD196-328R2
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Loading...