PCTEL GPSGSMSMMSMA Installation Instructions Manual

A. General Warranty. PCTEL, Inc (“PCTEL”) represents and warrants that

PRODUCT WARRANTY

the Products furnished hereunder shall be free from defects in material and
workmanship for a period of two (2) years from the date of shipment by PCTEL
under normal use and operation. PCTEL sole and exclusive obligation under
the foregoing warranty shall be to repair or replace, at its option, any defec­tive Product that fails during the warranty period. The expense of removal and
reinstallation of any item is not included in this warranty. THE FOREGOING
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND
ANY WARRANTIES ARISING FROM A COURSE OF DEALING, USAGE OR
TRADE PRACTICE WITH RESPECT TO THE PRODUCTS. Repair or replace­ment in the manner provided herein shall be the sole and exclusive remedy of
Buyer for breach of warranty and shall constitute fulfi llment of all liabilities of
PCTEL with respect to the quality and performance of the Products. PCTEL
reserves the right to inspect all defective Products (which must be returned
by Buyer to PCTEL factory freight prepaid). No Products will be accepted for
replacement or repair without obtaining a Return Materials Authorization (RMA)
number from PCTEL Customer Service [by telephone: [phone] or email:
[e-mail]]. Products returned without an RMA number
will not be processed and will be returned to Buyer freight collect. PCTEL shall
have no obligation to make repairs or replacement necessitated by catastrophe,
fault, negligence, misuse, abuse, or accident by Buyer, Buyer’s customers or
any other parties. The warranty period of any repaired or replaced Product
shall not extend beyond its original term. B. Warranty Conditions. The forego­ing warranty shall apply only if: (i) the Product has been properly installed and
used at all times in accordance, and in all material respects, with the applicable
Product documentation; (ii) no modifi cation, alteration or addition has been
made to the Product by persons other than PCTEL or PCTEL’s authorized
representatives or otherwise approved by PCTEL; and (iii) the Product has not
been subjected to misuse, neglect or unusual physical, electrical or electromag­netic stress, or some other type of accident. C. Disclaimer. PCTEL DOES NOT
WARRANT THAT THE OPERATION OF THE PRODUCTS IS ERROR-FREE
OR THAT OPERATION WILL BE UNINTERRUPTED. IN NO EVENT SHALL
PCTEL BE RESPONSIBLE FOR DAMAGES OR CLAIMS OF ANY NATURE
OR DESCRIPTION RELATING TO (i) SYSTEM PERFORMANCE, INCLUDING
COVERAGE, (ii) BUYER’S SELECTION OF PRODUCTS FOR BUYER’S AP­PLICATION AND/OR (iii) FAILURE OF PRODUCTS TO MEET GOVERNMENT
OR REGULATORY REQUIREMENTS.

RETURNS

In the unlikely event a defect occurs in this product, please work through the
dealer or distributor from which this product was purchased. PCTEL provides
complete service and support to all of its dealers and distributors.

471 Brighton Drive

Bloomingdale, IL 60108

GPSGSMSMMSMA THROUGH-HOLE

MOUNT MULTI-BAND GPS ANTENNA

INSTALLATION INSTRUCTIONS

© PCTEL, Inc.

All Rights Reserved

Part #MIS-GPSGSMSMMSMA

Printed in the U.S.A.

A. General Warranty. PCTEL, Inc (“PCTEL”) represents and warrants that
the Products furnished hereunder shall be free from defects in material and
workmanship for a period of two (2) years from the date of shipment by PCTEL
under normal use and operation. PCTEL sole and exclusive obligation under
the foregoing warranty shall be to repair or replace, at its option, any defec­tive Product that fails during the warranty period. The expense of removal and
reinstallation of any item is not included in this warranty. THE FOREGOING
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND
ANY WARRANTIES ARISING FROM A COURSE OF DEALING, USAGE OR
TRADE PRACTICE WITH RESPECT TO THE PRODUCTS. Repair or replace­ment in the manner provided herein shall be the sole and exclusive remedy of
Buyer for breach of warranty and shall constitute fulfi llment of all liabilities of
PCTEL with respect to the quality and performance of the Products. PCTEL
reserves the right to inspect all defective Products (which must be returned
by Buyer to PCTEL factory freight prepaid). No Products will be accepted for
replacement or repair without obtaining a Return Materials Authorization (RMA)
number from PCTEL Customer Service [by telephone: [phone] or email:
[e-mail]]. Products returned without an RMA number
will not be processed and will be returned to Buyer freight collect. PCTEL shall
have no obligation to make repairs or replacement necessitated by catastrophe,
fault, negligence, misuse, abuse, or accident by Buyer, Buyer’s customers or
any other parties. The warranty period of any repaired or replaced Product
shall not extend beyond its original term. B. Warranty Conditions. The forego­ing warranty shall apply only if: (i) the Product has been properly installed and
used at all times in accordance, and in all material respects, with the applicable
Product documentation; (ii) no modifi cation, alteration or addition has been
made to the Product by persons other than PCTEL or PCTEL’s authorized
representatives or otherwise approved by PCTEL; and (iii) the Product has not
been subjected to misuse, neglect or unusual physical, electrical or electromag­netic stress, or some other type of accident. C. Disclaimer. PCTEL DOES NOT
WARRANT THAT THE OPERATION OF THE PRODUCTS IS ERROR-FREE
OR THAT OPERATION WILL BE UNINTERRUPTED. IN NO EVENT SHALL
PCTEL BE RESPONSIBLE FOR DAMAGES OR CLAIMS OF ANY NATURE
OR DESCRIPTION RELATING TO (i) SYSTEM PERFORMANCE, INCLUDING
COVERAGE, (ii) BUYER’S SELECTION OF PRODUCTS FOR BUYER’S AP­PLICATION AND/OR (iii) FAILURE OF PRODUCTS TO MEET GOVERNMENT
OR REGULATORY REQUIREMENTS.

In the unlikely event a defect occurs in this product, please work through the
dealer or distributor from which this product was purchased. PCTEL provides
complete service and support to all of its dealers and distributors.

PRODUCT WARRANTY

RETURNS

471 Brighton Drive

Bloomingdale, IL 60108

GPSGSMSMMSMA THROUGH-HOLE

MOUNT MULTI-BAND GPS ANTENNA

INSTALLATION INSTRUCTIONS

© PCTEL, Inc.

All Rights Reserved

Part #MIS-GPSGSMSMMSMA

Printed in the U.S.A.

GPSGSMSMMSMA

THROUGH-HOLE MOUNT MULTI-BAND GPS ANTENNA

INSTALLATION INSTRUCTIONS

Determine the desired installation location for the antenna. The

1.
optimum location for mounting the antenna is a fl at surface, free
of obstructions, offering a clear view of the horizon and above in
all directions.
Minimum mounting surface thickness required is 0.040 inches

2.
(0.10 cm).
Antenna is designed to be mounted through a 0.48 inch (1.22

3.
cm) diameter or 0.75 inch (1.90 cm) diameter hole through the
mounting surface. Note that the antenna assembly includes a
slotted adapter washer for use only when installing through a

0.75 inch (1.90 cm) diameter hole.
Drill a hole through the mounting surface.

4.
Clean mounting surface and bottom of the antenna.

5.
Feed cables through the mounting hole.

6.
On the bottom side of the mounting surface, slide the slotted

7.
washer (if installing in a 0.75 inch diameter hole) around the
cables. Ensure the smaller diameter side of the washer is head­ing up.
Remove the adhesive paper liner from the bottom of the antenna.

8.
Press the antenna towards the mounting surface and hold the

9.
washer at the same time (if adapter washer is being used).
Slide the hex nut on the bottom side around the cables and

10.
tighten securely to the mounting stud.

GPSGSMSMMSMA

THROUGH-HOLE MOUNT MULTI-BAND GPS ANTENNA

INSTALLATION INSTRUCTIONS

Determine the desired installation location for the antenna. The

1.
optimum location for mounting the antenna is a fl at surface, free
of obstructions, offering a clear view of the horizon and above in
all directions.
Minimum mounting surface thickness required is 0.040 inches

2.
(0.10 cm).
Antenna is designed to be mounted through a 0.48 inch (1.22

3.
cm) diameter or 0.75 inch (1.90 cm) diameter hole through the
mounting surface. Note that the antenna assembly includes a
slotted adapter washer for use only when installing through a

0.75 inch (1.90 cm) diameter hole.
Drill a hole through the mounting surface.

4.
Clean mounting surface and bottom of the antenna.

5.
Feed cables through the mounting hole.

6.
On the bottom side of the mounting surface, slide the slotted

7.
washer (if installing in a 0.75 inch diameter hole) around the
cables. Ensure the smaller diameter side of the washer is head­ing up.
Remove the adhesive paper liner from the bottom of the antenna.

8.
Press the antenna towards the mounting surface and hold the

9.
washer at the same time (if adapter washer is being used).
Slide the hex nut on the bottom side around the cables and

10.
tighten securely to the mounting stud.