Page 1
Quick guide
1.Power on and measure
L*:89.6
or
a*:75.9
b*:15.5
Warranty instructions
Reminder
It is recommend that you keep the packing box for at least 30
days as the packing box is required to ensure the safety of
transportation.
Non warranty regulations
1.Unauthorized repair,misuse,accident,modification,use of non official accessories.
2.Instrument is out of warranty.
3.Damage caused by force.
L*:89.6
a*:75.9
L*:89.6
b*:15.5
a*:75.9
b*:15.5
4.Not the performance failure listed in the product performance
failure table.
5.Performance failure caused by human factors.
PCE-XXM 30
Operation Instruction
Product introduction
Please read this manual carefully before using the
product.
Screen
Calibration Cover
Test aperture
Test button
Power on
APP Measurement
2.How to measure color difference
Long press 2s
L*:50.9
a*:13.5
b*:14.4
Measurement
standard
3.Power off
dL*:-da*:-db*:-dE*ab:--
Transfer to test
the sample
Long press 5s
dL*: 2.8
da*: -1.5
db*: 1.9
dE*ab: 3.7
Fail
Measure the sample to
get the color difference
Parameters
Product name:
Geometry and Angle: D/8-SCI
Calibration: Automatic
Color Value: Spectral Reflectance
CIE-Lab,CIE-LCh,HunterLab,CIE-Luv,XYZ,Yxy,RGB
ColorDifference(ΔE*ab,ΔE*cmc,ΔE*94,ΔE*00)
WI(ASTM E313-00,ASTM E313-73,CIE/ISO,AATCC
YI(ASTM D1925,ASTM E313-00,ASTM E313-73)
Blackness(My,dM)，Color fastness,Tint(ASTM E313-00)
Light source: LED(Full Scale Visible Wavlength Range)
Lighting condition: A,B,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6
F7,F8,F9,F10,F11,F12,CWF,U30,DLF,NBF,TL83,TL84,U35
Angle of field: 2°,10°
Lighting source: LED(Full Scale Visible Wavlength Range)
Repeatability: dE*ab≤0.1
Aperture: 8mm
Wavelength Interval: 10mm
Wavelength Range: 400-700nm
Measurement Time: ＜1sec
Battery: 10,000 continuous test per-charge
Screen: ColorLCD,135*240,1.14inch
Interface: Bluetooth and USB
Munsell,Opacity,Dye strength,ColorStrength
Hunter,TaubeBergerStensby)
ColorDensity(CMYK(A,T,E,M)),Milm
PCE-XXM 30
Warning
·Do not attempt to disassemble or replace any part of the equip ment.Please contact the agent or official customer service for
after sales service.
·Do not place the equipment near heat source or directly expose to
the fire.
·If any liquid enters the equipment,please power off the equipment
immediately.
·This product contains small parts.It may cause suffocation and
other hazards,if swallowed by children.
Product performance failure table
Name Performance failure
PCE-XXM 30
1.The equipment can't power on.
2.The equipment’s button can't work normally.
.
Equipment screen fails to work normally.
3
4
.
Equipment lightsource fails to work normally.
5.Bluetooth can't connect.
*Parameters are subject to change without notice
Thank you for purchasing the PCE-XXM 30
Qualified
Tested
Page 2
Loading...