2. Wipe the unit with a dry soft cloth. Do not use
abrasives or solvents on this instrument
Comply with EMC
2、Applications
This instrument adopts the capacitive microphone as the
sensor, and is equipped with high-configuration MCU
Page 4
3
calculation, with high measurement accuracy and quick
response. Suitable for noise engineering, quality control,
health prevention and control and various environmental
sound measurement, such as construction engineering,
factory, school, hospital, library, office, home
3、Features
large HD color LCD display
Wide frequency response range and high accuracy
Light and voice alarm functions
Alarm value can be set
Preset six countries warning language optional
15S Self defined recording broadcast duration 15S
Screen locking function
Remote control and remote operation
Audio output function
Page 5
4
4、Specifications
Measuring range
35dB ~ 135dB
Dynamic range
50dB
Frequency response
31.5Hz ~ 8KHz
Accuracy
±2.0dB
Frequency weighting
A weighted network
Microphone
1/2 inch electret condenser microphone
Value update
500ms
six Languages
English, Spanish, French, German,
Japanese, Chinese
Recording function
15S
Over range prompt
> 135DB, "Hi" symbol is displayed;
< 35 DB, "LO" symbol is displayed
High alarm value
setting
√
Audio output function
√
Volume adjustment
√
Remote control
√
Page 6
5
Battery life
60hours
Power
Adapter;DC 9V/1A,outer diameter
5.5mm, inner diameter 2.0mm, central
positive pole
⑴ Volume identification symbol
⑵ Adapter access prompt symbol
⑶ Low voltage prompt symbol
⑷ Noise value display area
⑸ Noise unit symbol
⑹ Screen lock symbol
7、Function Operation Description
1) On/off function;Press the "" button to start
the meter, and press the "" button for 3 seconds to
shut down the machine
Page 9
8
2)Alarm function
a.Yellow light alarm, in the measurement mode, when
the measurement value is greater than the reported value,
the yellow light flashes continuously.
b.Red light alarm. in measurement mode, when the
measurement value is greater than the alarm value set by
the red light, the red light is continuously flashing and
the voice is reported (please be quiet).
3)Screen lock function; in the measurement state,
press the "" key, the "HOLD" symbol appears at the
top of the screen to indicate that the instrument locks the
current screen display, and again, the "" key to cancel
the function
4)Recording function; in measurement mode, press
Page 10
9
the "" button, and hear the "drop", indicating that
the recording begins, release" "the key, and hear
the two sounds of "drop" and "drop", indicating the end
of the recording.The instrument will automatically
broadcast a recording content.
5)Volume adjustment function; in measurement
mode, press "" to increase the volume and ""
to reduce the volume.
6)Alarm value adjustment function; in the
measurement mode, press the "" button, the
instrument can enter the "Yellow Light Alarm Value
Light" mode, and press the "" button again to return
to the measurement mode. In the alarm value adjustment
mode, press "" key to adjust the large value and
press "" key to adjust the small value.
7)Broadcast voice selection; in measurement mode,
press "" to select the required broadcast language,
then select in English, Spanish, French, German,
Japanese, Chinese, homemade recording content.
Note: After pressing the "" key, a voice will be
broadcast. After the voice is played, press the "" key
within 3 seconds to jump to the next voice play. If more
than 3 seconds, play the selected voice
Page 12
11
8)Correction method; Open the power switch of the
standard sound source (94 dB @ 1 KHZ), close the
standard source to the induction hole of the noise
detection sensor, and rotate the potentiometer in the
adjustment hole on the right side of the instrument to
display the LCD as 94.0dB.
8、Notes
The instrument has been calibrated before leaving the
factory. Without any professional equipment and
personnel, please do not easily modify the calibration
parameters
[Note] The instrument has been corrected before leaving
the factory, and the recommended correction period is
one year.
1)Repairs or servicing should only be performed by
Page 13
12
qualified personnel.
2)Wipe the unit with a dry soft cloth. Do not use
abrasives or solvents on this instrument
3)Remove the battery when the meter is to be stored
for long periods of time to avoid battery leakage.
4)When the battery runs out, the LCD displays the
"" symbol, and the new battery must be
replaced.
5)Use adapters to power as much as possible
6)Do not use it in places with high temperature and
high humidity
7)Do not tap the microphone head and remain dry.
Page 14
13
9、Accessories
1 x PCE-TSM 5 sound level meter
1 x 9 V 1 A plug-in mains adaptor
1 x remote control
1 x screwdriver
6 x 1.5 V AA battery
1 x user manual
1 x mounting material
Disposal
9、
For the disposal of batteries in the EU, the
006/66/EC directive of the European Parliament
2
applies. Due to the contained pollutants, batteries must
not be disposed of as household waste. They must be
given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU
we take our devices back. We either re-use them or
give them to a recycling company which disposes of the
devices in line with law.
For countries outside the EU, batteries and devices
should be disposed of in accordance with your local
waste regulations.
If you have any questions, please contact PCE
Instruments.
Page 15
PCE Instruments contact information
Germany
PCE Deutschland GmbH
Im Langel 26
D-59872 Meschede
Deutschland
Tel.: +49 (0) 2903 976 99 0
Fax: +49 (0) 2903 976 99 29
info@pce-instruments.com
www.pce-instruments.com/deutsch
United Kingdom
PCE Instruments UK Ltd
Trafford House
Chester Rd, Old Trafford
Manchester M32 0RS
United Kingdom
Tel: +44 (0) 161 464902 0
Fax: +44 (0) 161 464902 9
info@pce-instruments.co.uk
www.pce-instruments.com/english