PCE Instruments PCE-CIC 10-US Users guide

Page 1
PCE-CIC Series Color Viewing Box
User Manual
français, italiano, español, português, nederlands,
türk, polski, русский, 中文) can be downloaded here:
www.pce-instruments.com
Last change: 14 June 2017
v1.0
English
© PCE Instruments
Page 2
Contents
1 Safety notes ....................................................................................... 1
2 Specifications .................................................................................... 2
2.1 Technical specifications ..........................................................................................................2
2.2 Delivery contents.....................................................................................................................2
3 System description ........................................................................... 3
4 Operation ........................................................................................... 4
5 Warranty ............................................................................................ 5
6 Disposal ................................ ............................................................. 5
© PCE Instruments
Page 3
1 Safety notes
Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by PCE Instruments personnel. Damage or injuries caused by non-observance of the manual are excluded from our liability and not covered by our warranty.
The device must only be used as described in this instruction manual. If used
otherwise, this can cause dangerous situations for the user and damage to the meter.
Do not expose the device to extreme temperatures, direct sunlight, extreme humidity
or moisture.
Do not expose the device to shocks or strong vibrations.  The case should only be opened by qualified PCE Instruments personnel.  Never use the instrument when your hands are wet.  You must not make any technical changes to the device.  The appliance should only be cleaned with a damp cloth. Use only pH-neutral
cleaner, no abrasives or solvents.
The device must only be used with accessories from PCE Instruments or equivalent.  Before each use, inspect the case for visible damage. If any damage is visible, do not
use the device.
Do not use the instrument in explosive atmospheres.  Before using the device after transportation, check if the neon tubes are fixed in
place.
The lamps, especially the D65 lamp, should be replaced after 2,000 hours of use.
Record the time of use of each lamp.
Non-observance of the safety notes can cause damage to the device and injuries to
the user. We do not assume liability for printing errors or any other mistakes in this manual. We expressly point to our general guarantee terms which can be found in our general terms of
business. If you have any questions please contact PCE Instruments. The contact details can be found at
the end of this manual.
© PCE Instruments
1
Page 4
2 Specifications
PCE-CIC 10
House light
A / F
Artificial daylight
D65
Fluorescent
TL84 / F11
Ultraviolet
UV
Office / business / storage room light
CWF
Business / office lighting (USA)
TL83 / U30
Standards
ASTM D1729 ISO3664 DIN ANSI BSI
Dimensions
1310 x 600 x 800 mm
Weight
65 kg
PCE-CIC 11
House light
A / F
Artificial daylight
D65
Fluorescent
TL84 / F11
Ultraviolet
UV
Office / business / storage room light
CWF
Business / office lighting (USA)
TL83 / U30
Standards
ASTM D1729 ISO3664 DIN ANSI BSI
Dimensions
695 x 552 x 502 mm
Weight
19.5 kg
2.1 Technical specifications
2.2 Delivery contents
1 x colour matching cabinet PCE-CIC 11 or PCE-CIC 10 4 x bulbs Philips ZS 40 W 2 x fluorescent tube Philips Lifemax TLD 18W / 840 2 x fluorescent tube Philips Lifemax TLD 18W / 33-640 2 x fluorescent tube Philips Lifemax TLD 18W / 830 1 x fluorescent tube Sylvania Standard, F20T12 / D65 1 x fluorescent tube Philips TL-D 18W BLB 1 x instruction manual
© PCE Instruments
2
Page 5
3 System description
1
2
3
4
5
1. Status LEDs
2. On/Off button
3. Light source buttons
4. Clear button
5. Display
© PCE Instruments
3
Page 6
4 Operation
1. Connect the device to a wall socket by using the power cable.
2. Press the On/Off button to turn on the device. The display shows the total running time of the cabinet.
3. Activate the desired light source by pressing the particular button. The display now shows the total service time of the selected lamp. You can also use two or more light sources by selecting them with the particular buttons.
4. Put the samples in the cabinet and check their colour characteristics. If you analyse more than one item, do not let them overlap.
5. The item should be viewed from a 45° angle. The incidence of light should be perpendicular to the surface of the sample.
6. Once you are finished with checking the samples, press the On/Off button to turn off
Lamp replacement To replace a lamp, follow these steps:
the device.
1. Take out the old lamp.
2. Put in the new lamp. Make sure that the new lamp is in the right position.
3. Turn on the device by pressing the On/Off button.
4. Activate the new lamp by pressing the particular button.
5. Use a small object (like a paper clip or a small screwdriver) and put it in the hole of the Clear button. Once you pressed the button, the usage time of the selected lamp jumps back to zero.
© PCE Instruments
4
Page 7
5 Warranty
You can read our warranty terms in our General Business Terms which you can find here:
https://www.pce-instruments.com/english/terms.
6 Disposal
For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament applies. Due to the contained pollutants, batteries must not be disposed of as household waste. They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with your local waste regulations.
If you have any questions, please contact PCE Instruments.
© PCE Instruments
5
Page 8
PCE Instruments contact information
Germany France Spain
PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L. Im Langel 4 23, rue de Strasbourg Calle Mayor, 53 D-59872 Meschede 67250 SOULTZ-SOUS-FORETS 02500 Tobarra (Albacete) Deutschland France España Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17 Tel. : +34 967 543 548 Fax: +49 (0) 2903 976 99 29 Numéro de fax: +33 (0) 972 3537 18 Fax: +34 967 543 542 info@pce-instruments.com info@pce-france.fr info@pce-iberica.es www.pce-instruments.com/deutsch www.pce-instruments.com/french www.pce-instruments.com/espanol
United States of America United Kingdom Italy
PCE Americas Inc. PCE Instruments UK Ltd PCE Italia s.r.l. 711 Commerce Way suite 8 Units 12/13 Southpoint Business Park Via Pesciatina 878 / B-Interno 6 Jupiter / Palm Beach Ensign Way, Southampton 55010 LOC. GRAGNANO 33458 FL Hampshire CAPANNORI (LUCCA) USA United Kingdom, SO31 4RF Italia Tel: +1 (561) 320-9162 Tel: +44 (0) 2380 98703 0 Telefono: +39 0583 975 114 Fax: +1 (561) 320-9176 Fax: +44 (0) 2380 98703 9 Fax: +39 0583 974 824 info@pce-americas.com info@industrial-needs.com info@pce-italia.it www.pce-instruments.com/us www.pce-instruments.com/english www.pce-instruments.com/italiano
The Netherlands Chile Hong Kong
PCE Brookhuis B.V. PCE Instruments Chile S.A. PCE Instruments HK Ltd. Institutenweg 15 RUT: 76.154.057-2 Unit J, 21/F., COS Centre 7521 PH Enschede Santos Dumont 738, local 4 56 Tsun Yip Street Nederland Comuna de Recoleta, Santiago, Chile Kwun Tong Telefoon: +31 (0) 900 1200 003 Tel. : +56 2 24053238 Kowloon, Hong Kong Fax: +31 53 430 36 46 Fax: +56 2 2873 3777 Tel: +852-301-84912 info@pcebenelux.nl info@pce-instruments.cl jyi@pce-instruments.com www.pce-instruments.com/dutch www.pce-instruments.com/chile www.pce-instruments.cn
China
PCE (Beijing) Technology Limited PCE Teknik Cihazları Ltd.Şti. 1519 Room, 4 Building Halkalı Merkez Mah. Men Tou Gou Xin Cheng, Pehlivan Sok. No.6/C Men Tou Gou District 34303 Küçükçekmece - İstanbul 102300 Beijing Türkiye China Tel: 0212 471 11 47 Tel: +86 0755-32978297 Faks: 0212 705 53 93 lko@pce-instruments.cn info@pce-cihazlari.com.tr www.pce-instruments.cn www.pce-instruments.com/turkish
Turkey
© PCE Instruments
6
Loading...