PCE Health and Fitness PCE-666 User Manual

Temperature Meter

PCE-666

USER MANUAL

PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: [phone]
Fax: [phone]
[e-mail]

PCE Instruments UK Ltd.

Unit 11

Southpoint Business Park

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: [phone]

Fax: [phone]

[e-mail]

www.pce-instruments.com/english

www.pce-instruments.com

2

INTRODUCTION

Thank you for purchase of this Thermometer. This device is a
non-contact(infrared) thermometer and contact (probe &
clamp) thermometer. Simply aim the thermometer at the
target and press the measurement button to display the
surface temperature. The distance to target ratio is 1:1
therefore the thermometer should be positioned as close to
the target as possible.

1. FEATURES

⚫ User selectable ºC or ºF
⚫ Data Hold
⚫ Overrange indication
⚫ Automatic Power Off
⚫ Emissivity Digitally adjustable from 0.10 to 1.00
⚫ MAX, MIN, LOCK modes
⚫ Resolution 0.1ºC(0.1ºF)

2. WIDE RANGE APPLICATION

Food preparation, Safety inspectors, Plastic molding,
Asphalt, Marine and Screen printing, measure ink and Dryer
temperature, HVAC/R, Diesel and Fleet maintenance.

3. ºC or ºF Mode
To change this thermometer from ºC to ºF or from ºF to ºC,
when you using infrared to measuring, firstly turn the

instrument on by pressing the “IRT” button, release the “IRT”

button to hold measuring data. Then press the “MODE”
button four times, the ºC or ºF symbol will flash, press the
“IRT” button or “△” button to change the scale. When you
using Probe or Clamp to measuring, you can directly press
“MODE” button once to change the scale.