PCE PCE-GA 12 User Manual
Gas Detector PCE-GA 12
Gas detector PCE-GA 12
Gas flammable gas detector / Rechargeable battery / Audible alarm / Semi-rigid 400 mm probe / Durability of the probe approx. 5
years / Vibration alarm / Measured value display up to 10000 ppm / Battery and mains operation (AC power adapter)
The gas detector PCE-GA 12 is a very easy-to-use measuring device. This gas detector detects combustible gases and emits a vibrating alarm
as well as an audible alarm once a combustible gas has been detected by the gas detector. Thanks to the semi-rigid hose on the gas detection
device, the sensor can be aligned in almost any position to reach even inaccessible places.
This makes the gas detection device an ideal measuring device for employees who want to detect sporadically escaping gases (testing of plants
during a tour of the plant, checking engines and supply lines, testing gas supply lines). A manual setting of the gas detector is not necessary as
the gas detector automatically calibrates.
Audible alarm with 85 dB
Rechargeable battery for mobile use
Automatic calibration
Measuring range up to 10000 ppm
For the detection of combustible gases
Durability of the sensor about 5 years
Vibrating alarm when detecting gases
Sensor changeable
Specifications
Measuring range At low concentration 0 ... 1000 ppm
(only for methane) At high concentration 0 ... 10000 ppm
Acoustic alarm Volume: 85 dB
Sensitivity < 10 ppm (with methane)
Measuring interval < 2 seconds
Display Measurement of combustible gases
on the LC display, bar graphs
Calibration Automatically
Warming up 40 seconds
Battery Polymer Li-ion battery 18500 3.7V
Power adapter Primary side: 100 ... 240V, 50/60 Hz, 0.2 A
Secondary side: 5V, 1 A
Automatic shutdown Turns off if the battery capacity is too low
by itself or after 10 minutes if not used.
Sensor durability About 5 years (sensor is interchangeable)
Probe Semi-rigid 400 mm / 16"
Weight About 430 g / < 1 lb
More information
Manual
More product info
Similar products
Loading...