PB Teen Teen Rise and Shine Alarm Clock Installation Manual

Rise and Shine Alarm Clock

Thank you for your purchase of this quality LCD Alarm Clock with LED backlight. Please read the instruction carefully and keep it in a safe place for future use.

(1)

(2) (3)

(4)

(5) (6)

(7) (8)

(9)

(10)

At first, open the BATTERY COVER (10) and insert 2 x ‘AAA’ size batteries into the BATTERY COMPARTMENT (9) as the polarity indicated, then close the BATTERY COVER (10). Note: Do not mix new and old batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel cadmium) batteries.

FUNCTIONS

- Time and Calendar (including display of Month, Date and Day of the Week)

- Normal Alarm & Snooze Alarm

- Temperature (in selectable

oC/o

format)

TIME AND CALENDAR SET

- Move the FUNCTION switch (4) to T.SET (TIME SET), hour part is blinking; press UP (6) or DOWN key (8) to set the hour. (Be careful to set AM or PM correctly. When the PM time is set under 12-hour mode, a ‘PM’ mark will be on display.)

- Press MODE key (7), minute part is blinking; press UP (6) or DOWN key (8) to set the minute.

- Press MODE key (7), year part is blinking; press UP (6) or DOWN key (8) to set the year (from 2002-2099).

- Press MODE key (7), month part is blinking; press UP (6) or DOWN key (8) to set the month.

- Press MODE key (7), date part is blinking; press UP (6) or DOWN key (8) to set the date.

- Move the FUNCTION switch (4) to NORMAL, the time and calendar settings are finished.

(1) SNOOZE key (2) ALARM ON/OFF switch (3) RESET hole (4) FUNCTION switch

(5)

key

(6) UP key (7) MODE key (8) DOWN key (9) BATTERY COMPARTMENT (10) BATTERY COVER

ALARM SET

- Move the FUNCTION switch (4) to AL.SET (ALARM SET), hour part is blinking; press UP (6) or DOWN key (8) to set the alarm hour. (Be careful to set AM or PM correctly.)

- Press MODE key (7), minute part is blinking; press UP (6) or DOWN key (8) to set the alarm minute.

- Press MODE key (7) again, the snooze interval minute is blinking; here you can set snooze interval from 1 to 60 minutes by pressing UP (6) or DOWN key (8). You can ignore this step; the default snooze interval is 1 minute.

- Move the FUNCTION switch (4) to NORMAL, the alarm setting is finished.

TURN THE NORMAL ALARM OR SNOOZE ALARM ON/OFF

- Normal Alarm: Move the ALARM ON/OFF switch (2) to AL.ON (ALARM ON), the clock will alarm lasting 1 minute only once when the set alarm time is up. (Press any key to stop alarm sound.)

- Snooze Alarm: Move the ALARM ON/OFF switch (2) to SNZ.ON (SNOOZE ON), the alarm sound will start when the set alarm time is up; a) Press SNOOZE key (1), the clock will stop alarm temporarily; the alarm sound will start again after the snooze interval ends. After doing so three times repeatedly, the snooze alarm function will stop working. b) If no button is pressed manually the alarm will last for 1 minute per every snooze interval (three times in total). After that, the snooze alarm function stops working. c) Press any key except of SNOOZE key (1), the snooze alarm function will stop working.

- Alarm off: Move the ALARM ON/OFF switch (2) to AL.OFF, the normal alarm or snooze alarm function will stop working.

TEMPERATURE DISPLAY

- Under normal state, press

oC/o

key (5) to select Celsius or Fahrenheit on temperature display.

12/24 HOUR MODE

- Under normal state, press DOWN key (8) to select 12/24 hour mode. RESET

- If the clock is dead (the display doesn’t work) during setting, please use a slim but blunt object (like ball pen pointer, toothpick etc.) to press RESET hole (3), then the clock will return to the initial mode.

BACKLIGHT

- Press SNOOZE key (1) on the top of the clock at any time, the backlight will be lightened. MAINTENANCE

- The batteries should be replaced if the display screen or alarm becomes dysfunctional or weak.

- Please use a soft cloth or a paper towel to clean the clock.

- Do not use any corrosive cleanser or chemical solutions on the clock.

Thank you for your purchase!