PB Teen Sleep Study Loft Bed – Bookcase Assembly Instruction

Sleep & Study Loft Bed – Bookcase

Assembly Instructions 1 of 4

PRE-ASSEMBLY:

• For your safety and ease, assembly by two adults is recommended.

• Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly when

used in conjunction with the assembly instructions.

• Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The shipping
box provides and ideal work surface. Do not dispose of any contents until assembly is completed to avoid
accidentally discarding small parts or hardware.

• Use the parts and hardware lists to identify and separate each of the pieces included prior to starting assembly.

• Note: DO not fully tighten the bolts until all parts are in place. Failure to follow these instructions may cause the

bolts to misalign during assembly.

• Do not use power drill as it may cause cracking.

Date – 02-July-2012 www.pbteen.com Page 1/3

D6). Support Rail

–

1pc

D1.

D1.

D2.

D6.

D1.

D3.

PARTS LIST

D1). Shelf – 3pcs
D2). Center Shelf – 1pc
D3). Bottom Shelf – 1pc

HARDWARE LIST

(D7) Allen Key – 1x

(D10) Spring Washer – 24x

ASSEMBLY INSTRUCTIONS:

1. Slide a Spring Washer (D10) and a Flat Washer (D11) onto each Long/Short Bolts (D8 & D9).

2. Attach Support Rail (D6) to bottom of the Center Shelf (D2). Insert (4) Long Bolts (D) with washers from

Support Rail (D6) into bottom of the Center Shelf (D2) by using Allen Key (D7). Note: Wooden cleat on the
Support Rail (D6) is close to surface of Center Shelf (D2) after assembly.

D4). Side Panel – 1pc
D5). Cork Panel – 1pc

(D8) Long Bolt 1/4” x 51mm – 4x

(D11) Flat Washer – 24x

TOOLS REQUIRED:

Philips Screwdriver

(Not included)

(D9) Short Bolt 1/4“x28mm –20x

Date – 02-July-2012 www.pbteen.com Page 2/3

D7.

D8.
D10.
D11.

D8

4x

D6.

D2.