PB TEEN ELSIE LOFT BED Assembly Instruction Manual

Date: 2015-July-15 Rev: www.pbteen.com Page 1 of 12
ELSIE LOFT BED
ASSEMBLY INSTRUCTION
Date: 2015-July-15 Rev: www.pbteen.com Page 2 of 12
04-000066-6
Date: 2015-July-15 Rev: www.pbteen.com Page 3 of 12
Important Safety Instructions:
Please read all instructions carefully before assembling this bookcase. For your safety, assembly by two or more adults is strongly recommended. Keep these instructions for future use. Use only vendor-supplied hardware to assembly this item. Using unauthorized hardware could
jeopardize the structural integrity of the item.
Pre-assembly:
Remove all parts and hardware from the box. Place them on a carpeted or scratch-free work surface,
as this will avoid damaging parts. The shipping box provides an ideal work surface.
To avoid accidentally discarding small parts or hardware, please do not dispose of any contents until
assembly is complete.
Two people are recommended for your safety and ease of assembly. Prior to starting this assembly, use the parts and hardware lists to identify and separate each of the
pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly
instructions.
Note: Do not fully tighten any of the bolts until all parts are in place. Failure to follow these instructions
may cause the bolts to misalign during assembly.
Please use caution if using power tools to aid in assembly. Power tools can damage the hardware or
split the wood.
Part included:
A – Headboard (x1)
B – Footboard (x1)
C – Left Left Outer Post & Right Right Inner Post (x2)
D – Left Outer Post and Right Left Inner Post (x1)
E – Guardrail (x2)
F – Center Support Rail (x1)
G – Slats Roll (x1)
H – Ladder (x1)
- Bookcase (x1)
Date: 2015-July-15 Rev: www.pbteen.com Page 4 of 12
Hardware included:
I – Ball Tip Allen
Key
J – Wrench
K – Allen Bolt
L – Allen Bolt
M – Allen Bolt
4 x 95 x 30(mm)
88x 10 x2(mm)
5/16x120x15(mm)
1/4x50x13(mm)
1/4 x15x13(mm)
1pc
1pc
8pcs
4pcs
14pcs
N – Bolt
O – Hex Nut
P – Spring Washer
Q – Flat Washer
R – Spring Washer
1/4" x 50(mm)
1/4”x  x 4.2(mm)
5/16x13x(mm)
5/16x15 x1.5(mm)
1/4 x 10 x 1.5(mm)
8pcs
8pcs
8pcs
8pcs
12pcs
S – Flat Washer
T – Half Moon
Washer
U – Barrel Nut
V – Mending
Plate
W – Mending
Plate
1/4"x12x1.5(mm)
1/4"x24x8(mm)
5/16x15x12(mm)
28x28x50x4(mm)
25x25x26x2(mm)
12pcs
8pcs
8pcs
2pcs
4pcs
X – Phillips Head
Screw
Y – Phillips Head
Screw
8 x 30(mm)
   
8 x 19(mm)
28pcs
2pcs
TOOLS REQUIRED (but not included):
Phillips Head Screwdriver
+ 8 hidden pages