Date: 2013-Apr.-25 www.pbteen.com Page 1 of 10
Rev:
BEADBOARD LOFT BED
ASSEMBLY INSTRUCTIONS
Date: 2013-Apr.-25 www.pbteen.com Page 2 of 10
Rev:
WARNING: Failure to follow these warnings and assembly
instructions could result in serious injury or death. To prevent serious or
fatal injuries from entrapment or falls please follow these warnings:
Read all instructions before assembling this bunk bed.
Before each usage or assembly, inspect bunk bed for damaged hardware,
loose joints, missing parts , or sharp edges. DO NOT use the bunk bed if any
parts are missing or brok en .
DO NOT use substitute parts. Contact PBteen for replacement parts and
instructional literature if needed.
Follow the information on the warnings located on the upper bunk end
structure and on the carton. DO NOT REM OVE WARNING LABEL FROM THE
BED.
Always use the recommended size mattress or mattress support, to help
prevent the likelihood of entrapment or falls.
Ensure the thickness of the mattress does not exceed 9 inches and the surface
of the mattress must be at least 5 inches (127 mm) below the upper edge of
the guardrails.
Use only a mattress that is 74"-75" long and 52.5"-53.5" wide on the upper
bunk.
Do not allow children under 6 years of age to use the upper bunk.
Periodically check and ensure that the guardrail, ladder, and other components
are in their proper position, free from dam age, and that all connectors are tight.
Do not allow horseplay on or under the bed.
No jumping on the bed.
No more than one person allowed on the upper bunk at a time.
Always use the ladder for entering and leavi ng t he upper bunk.
Using a night-light may provide added safety precaution for a child using the
upper bunk.
Always use guardrails on both long side s of the upper bunk . If t he bun k bed will
be placed next to the wall, the guardrail that runs the full length of the bed
should be placed against the wall to prevent entrapment between the bed and
wall.
The use of water or sleep flotation mattresses is prohibited.
If refinishing, use a non-toxic finish specified for children's products.
STRANGULATION HAZARD - Never attach or hang items to any part of the bunk
bed that are not designed for use with the bed; for example, but not limited to,
hooks, belts and jump ropes.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
04-000066-3
Date: 2013-Apr.-25 www.pbteen.com Page 3 of 10
Rev:
Important Safety Instructions:
• Please read all instructions carefully before assembling this loft bed.
• For your safety, assembly by two or more adults is strongly recommended.
• Keep these instructions for future use.
• Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware could jeopardize the
structural integrity of the item.
Pre-assembly:
• Remove all parts and hardware from the box. Place them on a carpeted or scratch-free work surface, as this will
avoid damaging parts during assembly. The shipping box provides an ideal work surface.
• To avoid accidentally discarding small parts or hardware, do not dispose of any packaging or contents of the
shipping carton until assembly is complete.
• Use the parts and hardware lists below to identify and separate each of the pieces included.
• The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
• The use of power tools to aid in assembly is not recommended. Power tools can damage the hardware and split
the wood.
Hardware Included:
(O). Allen Key– 1pc
(P) Large Bolt 5/16x110mm – 11x
(Q) Large Bolt 5/16x35mm – 4x
(R) Large Spring Washer – 4x (S) Large Flat Washer – 4x
(T) Barrel Nut – 11x
(U) Small Bolt 1/4x32mm– 14x
(V) Small Bolt 1/4x25mm – 8x
(W) Small Spring Washer – 22x
(X) Small Flat Washer – 22x
(Y) Long Screw 4x30mm – 28x
(Z) Short Screw 4x19mm – 2x
PARTS INCLUDED:
(A). Footboard
1x
(B). Headboard
1x
(C). Front Guardrail
1x
(D). Rear Guardrail
1x
(E). Support Rail
1x
(F). Slat Roll
1x
(G). Ladder 1x
(H). Large Desktop 1x
(I). Small Desktop 1x
(J). Desk Post
1x
(K). Nightstand
1x
(L). Dresser
1x
(M) Dresser Foot
2x
(N) Dresser Support Leg
1x
Tools Required:
Philips Head Screw Driver
(not included)
Loading...