Payne PG92SCS Product Data

CONDENSING GAS FURNACE

Product Data

The model PG92SCS is an efficient and robust 4--way multipoise
condensing furnace with features including single--stage heating
and a rugged PSC Blower Motor. The PG92SCS builds on the
many Payne successes in the furnace industry and establishes a
new standard for all high--efficiency gas furnaces.

S Heating efficiency of 92.1% AFUE.
S Direct--vent/sealed combustion, single--pipe venting or

ventilated combustion air.

S PSC blower motor.
S 4--way multipoise furnace.
S Hot surface ignition.
S LED diagnostics and self test feature.
S Stores fault codes during power outages.
S Adjustable heating air temperature rise.
S Adjustable cooling airflow.
S Approved for Manufactured Housing/Mobile Home applications

with MH accessory kit.

S Approved for Twinning applications (48060 through 60120

sizes, only).

S Certified to leak 2% or less of nominal air conditioning CFM

delivered when pressurized to 1-inch water column with all
present air inlets, air outlets, and condensate drain port(s) sealed.

PG92SCS ALL

PG92SBS 048080 ONLY

SERIES A

STANDARD FEATURES

A11300

Use of the AHRI Certified TM Mark indicates a
manufacturer’s participation in the program. For
verification of certification for individual products,
go to www.ahridirectory.org.

1

CERTIFIED

CASING

SAP ORDERING

NO.

PG92SCS30040A 35 29.5 14.2 37,000 92.1% 910 0.10 595 - 970 1/3 - 4
PG92SCS48060B 35 29.5 17.5 56,000 92.1% 980 0.12 985 -1505 1/2 - 4
PG92SBS48080B 35 29.5 17.5 75,000 92.1% 1030 0.15 760 - 1555 1/2 - 5
PG92SCS48080B 35 29.5 17.5 75,000 92.1% 1030 0.15 760 - 1555 1/2 - 5
PG92SCS60080C 35 29.5 21.0 75,000 92.1% 1115 0.15 865 - 1885 3/4 - 5
PG92SCS48100C 35 29.5 21.0 93,000 92.1% 1490 0.20 890 - 1490 1/2 - 4
PG92SCS60100C 35 29.5 21.0 93,000 92.1% 1550 0.20 1475 - 1970 3/4 - 4
PG92SCS60120D 35 29.5 24.5 112,000 92.1% 2070 0.20 1450 - 2050 3/4 - 4

† Capacity in accordance with DOE test procedures. Ratings are position dependent. See rating plate.

‡ Heating CFM at factory default blower motor heating tap settings.

ESP --- External Static Pressure

DIMENSIONS (IN.)

H D W (BTUH) AFUE CFM‡

RATED HEATING

OUTPUT†

HEATING AIRFLOW

Heating ESP

(in. W.C.)

COOLING CFM @ 0.5

ESP

(in. W.C.)

FEATURES AND BENEFITS

PG92SCS

HYBRID HEATR Dual Fuel system compatible — This system
can provide more control over your monthly energy bills by
automatically selecting the most economical method of heating.
With HYBRID HEAT components, our system automatically
switches between the gas furnace and the electric heat pump as
outside temperatures change to maintain greater efficiency and
comfort than with any traditional single-source heating system.
The heat pump also delivers high-efficiency cooling in the summer.

Robust Igniter — Payne’s unique SiN igniter is not only
physically robust but it is also electrically robust. It is capable of
running at line voltage and does not require complex voltage
regulators as do other brands. This unique feature further enhances
the gas furnace reliability and continues Payne’s tradition of
technology leadership and innovation in providing a reliable and
durable product.

Reliable Heat Exchanger Design — The aluminized steel, clam
shell primary heat exchanger was re--engineered to achieve greater
efficiency out of a smaller size. The first two passes of the heat
exchanger are based on the current 80% product, a design with
more than ten years of field-proven performance and success.
These innovations, paired with the continuation of a crimped,
no-weld seam create an efficient, robust design for this essential
component.

The condensing heat exchanger, a stainless steel fin and tube
design, is positioned in the furnace to extract additional heat.
Stainless steel coupling box componentry between heat exchangers
has exceptional corrosion resistance in both natural gas and
propane applications.

4-Way Multipoise Design — One model for all applications –
there is no need to stock special downflow or horizontal models
when one unit will do it all. The new heat exchanger design allows
these units to achieve the certified AFUE in all positions.

Direct or Single-pipe Venting, or Optional Ventilated
Combustion Air — This furnace can be installed as a 2-pipe

(Direct Vent) furnace, in an optional ventilated combustion air
application, or in single-pipe, non-direct vent applications. This
provides added flexibility to meet diverse installation needs.

Sealed Combustion System — This furnace brings in combustion
air from outside the furnace, which results in especially quiet
operation. By sealing the entire combustion vestibule, the entire
furnace can be made quieter, not just the burners.

Monoport Burners — The burners are specially designed and
finely tuned for smooth, quiet combustion and economical
operation.

Bottom Closure — Factory--installed for side return; easily
removable for bottom return. The multi-use bottom closure can
also serve for roll-out protection in horizontal applications, and act
as the bottom closure for the optional return air base accessory.

Blower Access Panel Switch — Automatically shuts off 115-v
power to furnace whenever blower access panel is opened.

Quality Registration — Our furnaces are engineered and
manufactured under an ISO 9001 registered quality system.

Certifications — This furnace is CSA (AGA and CGA) design
certified for use with natural and propane gases. The furnace is
factory--shipped for use with natural gas. A CSA listed gas
conversion kit is required to convert furnace for use with propane
gas. The efficiency is AHRI efficiency rating certified. This furnace
meets California Air Quality Management District emission
requirements.

MOTOR HP -

SPEED TAPS

2

SPECIFICATIONS

The furnace should be sized to provide 100 percent of the design
heating load requirement plus any margin that occurs because of
furnace model size capacity increments. None of the furnace
model sizes can be used if the heating load is 20,000 BTU or
lower. Use Air Conditioning Contractors of America (Manual J
and S); American Society of Heating, Refrigerating, and
Air-Conditioning Engineers; or other approved engineering

Heating Capacity and Efficiency 30040 48060 48080 60080 48100 60100 60120

Input

Output

Certified Temperature
Rise Range ºF (ºC)

Airflow Capacity and Blower Data 30040 48060 48080 60080 48100 60100 60120

Rated External Static
Pressure (in. W.C.)

Airflow Delivery
@ Rated ESP (CFM)

Cooling Capacity (tons)

Direct-Drive Motor Type Permanent Split Capacitor (PSC)
Direct-Drive Motor HP 0.3 .5 0.5 0.75 0.5 1 1
Motor Full Load Amps 4.6 7.9 7.4 7.9 6.5 11.1 11.1
RPM Range 500 - 1150
Speed Selections 4 4 5 5 4 4 4
Blower Wheel Dia x Width in. 11 x 7 11 x 8 11 x 8 11 x 10 11 x 10 11 x 10 11 x 11
Air Filtration System Field Supplied
Filter Used for Certified Watt Data* KGAWF**06UFR

High
Heat

High
Heat

(BTUH) 40,000 60,000 80,000 80,000 100,000 100,000 120,000

(BTUH) 37,000 56,000 75,000 75,000 93,000 93,000 112,000

High Heat

Heating 0.10 0.12 0.15 0.15 0.20 0.20 0.20
Cooling 0.5 0.5 0.5 0.5 0.5 0.5 0.5

High Heat 910 980 1030 1115 1480 1550 2070

Cooling 970 1505 1555 1885 1490 1970 2050
400CFM/ton 2.5 3.5 4.0 4.5 3.5 5.0 5.0
350CFM/ton 2.5 4.0 4.5 5.0 4.0 5.5 5.5

40 - 70

(22 - 39)

method to calculate heating load estimates and select the furnace.
Excessive oversizing of the furnace may cause the furnace and/or
vent to fail prematurely, customer discomfort and/or vent freezing.

Failure to follow these guidelines is considered faulty installation
and/or misapplication of the furnace; and resulting failure, damage,
or repairs may impact warranty coverage.

35 - 65

(19 - 36)

35 - 65

(19 - 36)

35 - 65

(19 - 36)

40 - 70

(22 - 39)

40 - 70

(22 - 39)

45 - 75

(25 - 42)

PG92SCS

Electrical Data 30040 48060 48080 60080 48100 60100 60120

Input Voltage Volts-Hertz-Phase 115-60-1
Operating Voltage Range Min-Max 104-127
Maximum Input Amps Amps 5.2 8.6 8.1 8.6 7.3 11.9 11.9
Unit Ampacity Amps 7.5 11.7 11.1 11.7 10.1 15.8 15.8
Minimum Wire Size AWG 14 14 14 14 14 12 12

Maximum Wire Length
@ Minimum Wire Size

Maximum Fuse/Ckt Bkr
(Time-Delay Type Recommended)

Transformer Capacity (24vac output) 40 VA

External Control Power Available

Controls 30040 48060 48080 60080 48100 60100 60120

Gas Connection Size 1/2" - NPT
Burners (Monoport) 2 3 4 4 5 5 6
Gas Valve (Redundant) Manufacturer White Rodgers

Minimum Inlet Gas pressure (in. W.C.) 4.5

Maximum Inlet Gas pressure (in. W.C.) 13.6
Ignition Device Silicon Nitride
Limit Control 195 190 185 195 220 220 165
Heating Blower Control (Heating Off-Delay) Adjustable: 90, 120, 150, 180 seconds
Cooling Blower Control (Time Delay Relay) 90 seconds
Communication System none
Thermostat Connections Com24V,R,W,G,Y
Accessory Connections EAC (115vac); HUM (24vac)

Feet 49 31 33 31 36 36 36

(M) (14.9) (9.4) (10.1) (9.4) (11.0) (11.0) (11.0)

Amps 15 15 15 15 15 20 20

Heating 27.9 VA
Cooling 34.6 VA

* See Accessory List for part numbers available.

3

1

Brand

P

Brand

2

Product

G

Product

3 - 4

Base Effy.

96

0 - +90 AFUE
2 - +92 AFUE
3 - +93 AFUE
5 - +95 AFUE
6 - +96 AFUE
7 - +97 AFUE

MODEL NUMBER NOMENCLATURE

5

Voltage/Motor

V

S - Std./PSC
X - High Eff.
V - Variable Speed

Example of a Model Number

6

Major Series

A

Major Series

7

Htg. Stages

T

T - Two-stage
S - Single-stage

Not all familes have these models.

8 - 9

Cooling Cap.

30

24 - 800 CFM
30 - 1000 CFM
36 - 1200 CFM
42 - 1400 CFM
48 - 1600 CFM
54 - 1800 CFM
60 - 2000 CFM
66 - 2200 CFM
(@ 0.5” ESP)

10 - 12

Heating Cap.

040

040= 40,000 BTU
060= 60,000 BTU
080= 80,000 BTU
100=100,000 BTU
120=120,000 BTU
140=140,000 BTU

13

Width/Variation

A

A - 14.2” Std.
B - 17.5” Std.
C - 21.0” Std.
D - 24.5” Std.

14

Minor Series

A

Minor Series

15 - 16

Variations

AA

Variations

A12375

PG92SCS

FLAME
SENSOR

MANUAL RESET
ROLLOUT SWITCH

GAS VALVE

OPERATING INSTRUCTIONS
NOT SHOWN (LOCATED ON
MAIN FURNACE DOOR, SEE
OPERATING INSTRUCTIONS
INSIDE DOOR FIGURE).

ELECTRICAL JUNCTION
BOX (IF REQUIRED,
LOCATION MAY VARY)

BLOWER DOOR
SAFETY SWITCH

FURNACE COMPONENTS

HOT SURFACE

GAS BURNER

IGNITER

MANUAL RESET
ROLLOUT SWITCH

MAIN LIMIT SWITCH

(BEHIND GAS VALVE)

INDUCER MOTOR
ASSEMBLY

FURNACE
CONTROL
BOARD

RATING PLATE NOT SHOWN

(LOCATED ON BLOWER DOOR)

REPRESENTATIVE DRAWING ONLY, SOME MODELS MAY VARY IN APPEARANCE.

BLOWER AND
MOTOR

CAPACITOR/
POWER CHOKE
(IF USED)

A11485

4

ACCESSORIES

Venting Accessories

Vent Kit - Through the Cabinet KGADC0101BVC D D D D D D D
Vent Terminal - Concentric - 2” (51 mm) KGAVT0701CVT
Vent Terminal - Concentric - 3” (76 mm) KGAVT0801CVT
Vent Terminal Bracket - 2” (51 mm) KGAVT0101BRA
Vent Terminal Bracket - 3” (76 mm) KGAVT0201BRA
Vent Kit --- Rubber Coupling KGAAC0101RVC See Venting Tables

Condensate Drainage Accessories

Freeze Protect Kit - Trap Heater KGAHT0201CFP D D D D D D D
CPVC to PVC Drain Adapters - 1/2” CPVC to 3/4” PVC KGAAD0110PVC D D D D D D D
Horizontal Trap Grommet - Direct Vent KGACK0101HCK All DV Horizontal
Condensate Neutralizer Kit P908--- 0001 D D D D D D D
External Trap Kit KGAET0201ETK D D D D D D D

Ductwork Adapter Accessories

Furnace Base Kit for Combustible Floors KGASB0201ALL D D D D D D D
Coil Adapter Kits --- No Offset KGADA0101ALL D D D D D D D
Coil Adapter Kits --- Single Offset KGADA0201ALL D D D D D D D
Coil Adapter Kits --- Double Offset KGADA0301ALL D D D D D D D
Return Air Base (U pflow Applications) 14.0 --- in. wide KGARP0301B14 D
Return Air Base (U pflow Applications) 17.5 --- in. wide KGARP0301B17 D D
Return Air Base (U pflow Applications) 21.0 --- in. wide KGARP0301B21 D D D
Return Air Base (U pflow Applications) 24.5 --- in. wide KGARP0301B24 D
IAQ Device Duct Adapters 20.0 --- in. IAQ to 16 in. Side

Return

IAQ Device Duct Adapters 24.0 --- in. IAQ to 16 in. Side
Return

Gas Conversion Accessories

Mobile Home Kit KGBMH0601KIT D D D D D D D
Gas Conversion Kit - Nat to LP KGBNP50011SP D D D D D D D
Gas Conversion Kit - L P to Nat KGBPN42011SP D D D D D D D
GasOrificeKit-#42(NatGas) LH32DB207 D D D D D D D
GasOrificeKit-#43(NatGas) LH32DB202 D D D D D D D
GasOrificeKit-#44(NatGas) LH32DB200 D D D D D D D
GasOrificeKit-#45(NatGas) LH32DB205 D D D D D D D
GasOrificeKit-#46(NatGas) LH32DB208 D D D D D D D
GasOrificeKit-#47(NatGas) LH32DB078 D D D D D D D
GasOrificeKit-#48(NatGas) LH32DB076 D D D D D D D
Gas Orifice Kit - #54 (LP) LH32DB203 D D D D D D D
Gas Orifice Kit - #55 (LP) LH32DB201 D D D D D D D
Gas Orifice Kit - #56 (LP) LH32DB206 D D D D D D D
Gas Orifice Kit - 1.25mm (LP) LH32DB209 D D D D D D D
Gas Orifice Kit - 1.30mm (LP) LH32DB210 D D D D D D D

Control Accessories

Twinning Kit KGATW0701HSI D D D D D D

IAQ Accessories

Filter Rack --- Side Return for 1” Filters KGAFR0201ALL D D D D D D D
Filter Rack --- Bottom Return for 1” Filters --- 14.2” wide KGBFR0401B14 D
Filter Rack --- Bottom Return for 1” Filters --- 17.5” wide KGBFR0501B17 D D
Filter Rack --- Bottom Return for 1” Filters --- 21.0” wide KGBFR0601B21 D D D
Filter Rack --- Bottom Return for 1” Filters --- 24.5” wide KGBFR0701B24 D
Filter Pack (6 pack) --- Washable - 16x25x1 KGAWF1306UFR D D D D D D D
Filter Pack (6 pack) --- Washable - 24x25x1 KGAWF1506UFR D D D D D D D
EZ-Flex Filter - 16” (406 mm) EXPXXFIL0016 Use with EZXCAB---1016
EZ-Flex Filter - 20” (508 mm) EXPXXFIL0020 Use with EZXCAB---1020
EZ-Flex Filter - 24” (610 mm) EXPXXFIL0024 Use with EZXCAB---1024
EZ-Flex Filter with End Ca ps - 16” (406 mm) EXPXXUNV0016 Use with EZXCAB --- 1016
EZ-Flex Filter with End Ca ps - 20” (508 mm) EXPXXUNV0020 Use with EZXCAB --- 1020
EZ-Flex Filter with End Ca ps - 24” (610 mm) EXPXXUNV0024 Use with EZXCAB --- 1024
Cartridge Media Filter - 16” ( 406 mm) FILXXCAR0016 Use with FILCABXL ---1016
Cartridge Media Filter - 20” ( 508 mm) FILXXCAR0020 Use with FILCABXL ---1020
Cartridge Media Filter - 24” ( 610 mm) FILXXCAR0024 Use with FILCABXL ---1024

D = Used with the model furnace

DESCRIPTION PAR T NU MBE R 30040 48060 48080 60080 48100 60100 60120

See Venting Tables

KGAAD0101MEC 20”x25” IAQ Devices

KGAAD0201MEC 24”x25” IAQ Devices

PG92SCS

5

AIR DELIVERY -- CFM (BOTTOM RETURN WITH FILTER)

Furnace

Return Air

Connection

Wire Lead

Color

Cooling

Ton s

CFM /

Ton

Black 2.5 388 1145 1100 1060 1015 970 920 860 785 680 615

030040 SIDE/BOTTOM

Blue 2.0 413 970 940 905 870 825 775 730 675 570 505
Yellow 2.0 385 910 880 845 810 770 725 675 600 535 475
Red 1.5 397 725 695 665 635 595 555 510 460 390 340
Black 4.0 376 1600 1545 1505 1475 1505 1445 1400 1330 1235 1140

048060 SIDE/BOTTOM

Yellow 3.5 377 1380 1340 1335 1330 1320 1285 1225 1155 1085 1000

3

Blue
Red

3

3.0 387 1190 1185 1195 1195 1160 1125 1075 1015 950 885

2.5 394 1030 1025 1030 1010 985 940 905 855 805 735

Black 4.0 408 1800 1770 1735 1685 1630 1570 1495 1415 1330 1230

048080

(Series B

Only)

SIDE/BOTTOM

Yellow 3.5 386 1445 1430 1410 1385 1350 1305 1255 1195 1120 1045
Orange 3.0 390 1250 1240 1225 1200 1170 1130 1090 1040 975 910
Blue 2.5 404 1090 1080 1060 1035 1010 970 930 885 835 765

3

Red

2.0 390 880 860 835 810 780 750 710 665 615 560

Black 4.0 389 1650 1620 1640 1605 1555 1495 1425 1345 1255 1165

048080

(Series C

SIDE/BOTTOM

Only)

PG92SCS

Yellow 3.5 381 1420 1425 1400 1370 1335 1290 1230 1170 1095 1015
Orange 3.0 383 1205 1205 1185 1165 1150 1100 1055 1000 935 870
Blue 2.5 384 1035 1020 1005 985 960 930 895 845 795 735

3

Red

2.0 380 850 825 805 785 760 725 695 655 600 545
Black 5.0 377 2225 2160 2070 1980 1885 1790 1690 1575 1460 1345
Yellow 4.0 386 1690 1665 1640 1595 1545 1485 1410 1330 1235 1135
Orange 3.5 397 1485 1470 1455 1430 1390 1340 1280 1205 1120 1035

4, 5

Blue
Red

3

3

2.5 426 1120 1110 1100 1090 1065 1035 990 935 870 805

2.0 433 940 920 910 890 865 830 790 745 690 625

060080

BOTTOM or

TWO-SIDES

Black 4.0 373 1715 1660 1610 1555 1490 1420 1340 1245 1150 1065

048100 SIDE/BOTTOM

Yellow
Blue
Red

3

3

3.5 379 1535 1480 1435 1380 1325 1260 1180 1095 1010 910

3.0 367 1300 1255 1205 1160 1100 1035 970 905 810 730

2.0 445 1110 1055 1005 955 890 835 770 690 610 535

3

Black 5.0 394 2270 2205 2130 2055 1970 1880 1780 1670 1555 1425

060100

BOTTOM or

TWO-SIDES

Yellow 5.0 367 2090 2040 1980 1910 1835 1755 1670 1570 1460 1340

4, 5

Blue 4.0 416 1850 1815 1775 1725 1665 1600 1525 1435 1335 1225
Red 3.5 421 1580 1550 1540 1515 1475 1420 1355 1280 1190 1100
Black 5.0 410 2385 2310 2230 2150 2050 1920 1780 1650 1540 1415

060120

BOTTOM or

TWO-SIDES

Yellow 5.0 369 2130 2070 2010 1940 1845 1740 1630 1525 1420 1305

4, 5

Blue 4.0 416 1875 1840 1795 1735 1665 1580 1495 1410 1310 1205

3

Red

3.5 414 1610 1585 1555 1515 1450 1395 1325 1250 1160 1080

Test Airflow Delivery @ Various External Static Pressures

0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1

NOTE:

1. A filter is required for each return --- air inlet. Airflow performance includes a 3/4 --- in. (19 mm) washable filter media such as contained in a factory---author ­ized accessory filter rack. See accessory list. To determine airflow performance without this filter, assume an additional 0.1 in. W.C.. available external static
pressure.

2. ADJUST THE BLOWER SPEED TAPS AS NECESSARY FOR THE PROPER AIR TEMPERATURE RISE FOR EACH INSTALLATION.

3. Shaded areas indicate that this airflow range is BELOW THE RANGE ALLOWED FOR HEATING OPERATION.

4. Airflows over 1800 CFM require bottom return, two ---side return, or bottom and side return. A minimum filter size of 20” x 25” (508 x 635 mm) is required.

5. For upflow applications, air entering from one side into both the side of the furnace and a return air base counts as a side and bottom return.

6. All airflows that are shown in BOLD exceed 0.58 watts per CFM at the given external static pressure.

6

Winter

Design

Temp

°F

MAXIMUM ALLOWABLE EXPOSED VENT LENGHT INSULATION TABLE

Table 1 – Maximum Allowable Exposed Vent Length in Unconditioned Space -- Ft.

Unit Size 40,000* BTUH 60,000 BTUH

Pipe Dia.

in.

20 20 20 20 20 50 45 20 60 50 20 30 30 25 20 75 65 60 20 85 75 65

0 10 5 5 20 25 20 20 30 25 15 15 10 10 20 40 30 25 20 45 40 30

-20 5 20 15 10 20 20 15 10 5 20 25 20 15 20 30 25 20

-40 15 10 5 15 15 10 5 20 15 15 10 20 20 15 10

Uninsulated

1½ 2 2½ 1½ 2 2½ 1½ 2 2½ 1½ 2 2½ 3 1½ 2 2½ 3 1½ 2 2½ 3

3/8-in. Insulation 1/2-in. Insulation

Uninsulated 3/8-in. Insulation 1/2-in. Insulation

Winter

Design

Temp

°F

Winter

Design

Temp

°F

Winter

Design

Temp

°F

Unit Size 80,000 BTUH

Pipe Dia.

in.

20 15 40 40 35 30 15 50 90 75 65 15 50 70 70 70

0 15 20 15 10 5 15 50 45 35 30 15 50 50 40 35

-20 15 10 5 15 35 30 20 15 15 40 30 25 15

-40 10 5 15 25 20 15 5 15 30 25 20 10

Unit Size 100,000 BTUH

Pipe Dia.

in.

20 20 50 40 35 20 80 95 80 20 80 105 90

0 20 20 15 10 20 55 45 35 20 65 55 45

-20 15 10 5 20 35 30 20 20 45 35 25

-40 10 5 20 25 20 10 20 30 25 15

Unit Size 120,000 BTUH 140,000 BTUH

Pipe Dia.

in.

20 10 50 40 10 75 95 10 75 105 5 55 50 5 65 105 5 65 125

0 10 20 15 10 55 45 10 65 50 5 25 15 5 65 50 5 65 60

-20 10 10 10 35 25 10 45 30 5 10 5 5 45 30 5 50 40

-40 10 5 10 25 15 10 30 20 5 5 5 30 20 5 35 25

1½ 2 2½ 3 4 1½ 2 2½ 3 4 1½ 2 2½ 3 4

2 2½ 3 4 2 2½ 3 4 2 2½ 3 4

Uninsulated

2½ 3 4 2½ 3 4 2½ 3 4 2½ 3 4 2½ 3 4 2½ 3 4

Uninsulated 3/8-in. Insulation 1/2-in. Insulation

Uninsulated 3/8-in. Insulation 1/2-in. Insulation

3/8-in. Insulation 1/2-in. Insulation

Uninsulated 3/8-in. Insulation 1/2-in. Insulation

Maximum Allowable Exposed Vent Length in Unconditioned Space -- Meters

Unit Size 40,000* BTUH 60,000 BTUH

Uninsulated

Pipe Dia.mm38 51 64 38 51 64 38 51 64 38 51 64 76 38 51 64 76 38 51 64 76

3/8-in. Insulation 1/2-in. Insulation

Uninsulated 3/8-in. Insulation 1/2-in. Insulation

PG92SCS

Winter

Design

Temp

°C

Winter

Design

Temp

°C

Winter

Design

Temp

°C

Winter

Design

Temp

°C

-7 6.1 6.1 6.1 6.1 15.2 13.7 6.1 18.3 15.2 6.1 9.1 9.1 7.6 6.1 22.9 19.8 18.3 6.1 25.9 22.9 19.8

-18 3.0 1.5 1.5 6.1 7.6 6.1 6.1 9.1 7.6 4.6 4.6 3.0 3.0 6.1 12.2 9.1 7.6 6.1 13.7 12.2 9.1

-29 1.5 6.1 4.6 3.0 6.1 6.1 4.6 3.0 1.5 6.1 7.6 6.1 4.6 6.1 9.1 7.6 6.1

-40 4.6 3.0 1.5 4.6 4.6 3.0 1.5 6.1 4.6 4.6 3.0 6.1 6.1 4.6 3.0

Unit Size 80,000 BTUH

Pipe Dia.mm38 51 64 76 102 38 51 64 76 102 38 51 64 76 102

-7 4.6 12.2 12.2 10.7 9.1 4.6 15.2 27.4 22.9 19.8 4.6 15.2 21.3 21.3 21.3

-18 4.6 6.1 4.6 3.0 1.5 4.6 15.2 13.7 10.7 9.1 4.6 15.2 15.2 12.2 10.7

-29 4.6 3.0 1.5 4.6 10.7 9.1 6.1 4.6 4.6 12.2 9.1 7.6 4.6

-40 3.0 1.5 4.6 7.6 6.1 4.6 1.5 4.6 9.1 7.6 6.1 3.0

Unit Size 100,000 BTUH

Pipe Dia.mm51 64 76 102 51 64 76 102 51 64 76 102

-7 6.1 15.2 12.2 10.7 6.1 24.4 28.9 24.4 6.1 24.4 32.0 27.4

-18 6.1 6.1 4.6 3.0 6.1 16.8 13.7 10.7 6.1 19.8 16.7 13.7

-29 4.6 3.0 1.5 6.1 10.7 9.1 6.1 6.1 13.7 10.7 7.6

-40 3.0 1.5 6.1 7.6 6.1 3.0 6.1 9.1 7.6 4.6

Unit Size 120,000 BTUH 140,000 BTUH

Uninsulated

Pipe Dia.mm64 76 102 64 76 102 64 76 102 64 76 102 64 76 102 64 76 102

-7 3.0 15.2 12.2 3.0 22.9 28.9 3.0 22.9 32.0 1.5 16.7 15.2 1.5 19.8 32.0 1.5 19.8 38.1

-18 3.0 6.1 4.6 3.0 16.8 13.7 3.0 19.8 15.2 1.5 7.6 4.6 1.5 19.8 15.2 1.5 19.8 18.3

-29 3.0 3.0 3.0 10.7 7.6 3.0 13.7 9.1 1.5 3.0 1.5 1.5 13.7 9.1 1.5 15.2 12.2

-40 3.0 1.5 3.0 7.6 4.6 3.0 9.1 6.1 1.5 1.5 1.5 9.1 6.1 1.5 35 7.6

Uninsulated 3/8-in. Insulation 1/2-in. Insulation

Uninsulated 3/8-in. Insulation 1/2-in. Insulation

3/8-in. Insulation 1/2-in. Insulation

Uninsulated 3/8-in. Insulation 1/2-in. Insulation

7

MAXIMUM EQUIVALENT VENT LENGTH

Table 2 – Maximum Equivalent Vent Length -- Ft.

NOTE: Maximum Equivalent Vent Length (MEVL) includes standard and concentric vent termination and does NOT include elbows.

Use Table 3 - Deductions from Maximum Equivalent Vent Length to determine allowable vent length for each application.

40,000

Unit Size

Pipe Dia.

(in)

0-2000 20 85 185
2001-3000
3001-4000 70 160
4001-4500
4501-5000 60 145 80 165 145 160
5001-6000 55 130 75 140 155 35 100 135 150 140 155 155 35 80

Altitude (feet)

6001-7000
7001-8000 40 110 65 120 135 120 125
8001-9000

9001-10000 25 85 N/A 55 105 115 20 75 100 105 45 100 115 30 115 10 15

PG92SCS

Unit Size

Pipe Dia.

(mm)

0-610 6 26 57

611-914

915-1219 22 49
1220-1370
1371-1524 19 45 24 51 45 50
1525-1829 17 41 82 43 47 11 31 42 46 43 48 48 11 25
1830-2134

Altitude (meters)

2135-2438 12 34 20 37 42 36 39
2439-2743
2744-3048 8 26 N/A 17 33 36 7 24 31 33 14 34 36 12 35 3.5 5

Outlet choke

required under 10

ft. TEVL

1½ 2 2½ 1½ 2 2½ 3 1½ 2 2½ 3 4 2 2½ 3 4 2½ 3 4 2½ 3 4

80 175 95 165 185

15

65 155 85

10

45 120

5

30 95 5 60 115 125 25 80 110 115 50 115 125 40 120 15 30

N/A

60,000 80,000 100,000 120,000 140,000

100 175 200 15 50 130 175 200 20 80 175 200

20

90 155 175 115 155 175

15

10

150

70 130 145

170

10

N/A

125 165 185

45

40 110

30 90

15 75

150 165

125 140 60 135 145 50 140 30 65

70 170

10

65

55 125 135 45 130 25 45

N/A

165 185 70 175

175 5 65 165 120

155

150 165 45 100

75 185 5 65 155

10

160

60

N/A

Meters

40,000

Outlet choke

required under 10

ft. TEVL

38 51 64 38 5 64 76 38 51 64 76 102 51 64 76 102 64 76 102 64 76 102

24 53 29 51 57

4.5

20 47 26

3

15 37

1.5

10 30 1.5 19 35 38 8 26 34 36 15 36 39 13 38 5 10

N/A

60,000 80,000 100,000 120,000 140,000

31 54 61 2 16 40 54 61 6 25 54 61

6.5

27 48 54 36 48 53

5

3

46

22 40 44

3

52

N/A

15

13 34

10 27

38 51 57

46 51

39 42 19 41 45 16 43 9 20

5 23

3

N/A

51 57 21 54

54 1.5 20 51 36

48

22 52

46 51 14 31

21

18 38 42 14 40 7 15

23 57 1.5 21 48

3

50

19

N/A

N/A

N/A

140

60

50 110

42

18

16 33

ELBOW CONFIGURATIONS

VENT TERMINAL CONFIGURATIONS

Concentric

Long

Medium

Mitered

Standard 2-in., 3-in., or
optional 4-in. termination.

A13110

Table 3 – Deductions from Maximum Equivalent Vent Length -- Ft. (M)

Pipe Diameter (in): 1-1/2 2 2-1/2 3 4

Mitered 90º Elbow 8 (2.4) 8 (2.4) 8 (2.4) 8 (2.4) 8 (2.4)

Medium Radius 90º Elbow 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5) 5 (1.5)

Long Radius 90º Elbow 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9) 3 (0.9)

Mitered 45º Elbow 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2) 4 (1.2)

Medium Radius 45º Elbow 2.5 (0.8) 2.5 (0.8) 2.5 (0.8) 2.5 (0.8) 2.5 (0.8)

Long Radius 45º Elbow 1.5 (0.5) 1.5 (0.5) 1.5 (0.5) 1.5 (0.5) 1.5 (0.5)

Tee 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9) 16 (4.9)

8

Venting System Length Calculations

The Total Equivalent Vent Length (TEVL) for EACH combustion air or vent pipe equals the length of the venting system, plus the equivalent
length of elbows used in the venting system from Table 3.

Standard vent terminations or factory accessory concentric vent terminations count for zero deduction.
See vent system manufacturer’s data for equivalent lengths of flexible vent pipe or other termination systems. DO NOT ASSUME that one

foot of flexible vent pipe equals one foot of straight PVC/ABS DWV vent pipe.
Compare the Total Equivalent Vent Length to the Maximum Equivalent Vent Lengths in Table 2.

Example 1

A direct--vent 60,000 Btuh furnace installed at 2100 ft. (640 M). Venting system includes, FOR EACH PIPE, 100 feet (30 M) of vent pipe,
95 feet (28 M) of combustion air inlet pipe, (3) 90_ long radius elbows, (2) 45_ long radius elbows and a factory accessory concentric vent
kit.

Can this application use 2--in. (50 mm ND) PVC/ABS DWV vent piping?

Measure the required linear length of air inlet and vent pipe; insert the
longest of the two here:

Add equiv length of (3) 90º long-radius elbows
(use the highest number of elbows for either the
vent or inlet pipe)

Add equiv length of (2) 45º long-radius elbows
(use the highest number of elbows for either the
vent or inlet pipe)

Add equiv length of vent termination 0ft. From Table 3

Add correction for flexible vent pipe, if any 0ft.

Total Equivalent Vent Length (TEVL) 112 ft. Add all of the above lines

Maximum Equivalent Vent Length (MEVL) 127 ft. For 2” pip e from Table 2

Is TEVL less than MEVL? YES Therefore, 2” pipe may be used

3 x 3ft = 9ft. From Table 3

2 x 1.5 ft = 3ft. From Table 3

100 ft

Use length of the longer of the vent

or air inlet piping system

From Vent Manufacturer’s instructions;

zero for PVC/ABS DWV

Example 2

A direct--vent 60,000 Btuh furnace installed at 2100 ft. (640 M) Venting system includes, FOR EACH PIPE, 100 feet (30 M) of vent pipe,
95 feet (28 M) of combustion air inlet pipe, (3) 90_ long radius elbows, and a polypropylene concentric vent kit. Also includes 20 feet (6 M)
of flexible polypropylene vent pipe, included within the 100 feet (30 M) of vent pipe.

Assume that one meter of flexible 60 mm or 80 mm polypropylene pipe equals 2 Meters of PVC/ABS pipe. VERIFY FROM VENT

MANUFACTURER’S INSTRUCTIONS.

Can this application use 60 mm (O.D.) polypropylene vent piping? If not what size piping can be used?

Measure the required linear length of air inlet and vent pipe; insert the
longest of the two here:

Add equiv length of (3) 90º long-radius elbows
(use the highest number of elbows for either the
vent or inlet pipe)

Add equiv length of (2) 45º long-radius elbows
(use the highest number of elbows for either the
vent or inlet pipe)

Add equiv length of vent termination 9M x 3ft/M = 18 ft. From Vent Manufacturer’s instructions
Add correction for flexible vent pipe, if any 1.8 x 20 ft = 36 ft. From Vent Manufacturer’s instructions
Total Equivalent Vent Length (TEVL) 163 ft. Add all of the above lines

3 x 3ft = 9ft. From Vent Manufacturer’s instructions

0 x = 0ft. From Vent Manufacturer’s instructions

100 ft

Use length of the longer of the vent

or air inlet piping system

PG92SCS

Maximum Equivalent Vent Length (MEVL) 127 ft. For 2” pip e from Table 2

Is TEVL less than MEVL? NO

Maximum Equivalent Vent Length (MEVL) 250 ft. For 3” pip e from Table 2

Is TEVL less than MEVL? YES Therefore, 80 mm pipe may be used

NOTES:

1. Use only the smallest diameter pipe possible for venting. Over --- sizing may cause flame distu rbance or excessive vent terminal icing or freeze --- up.

2. NA --- Not all owed. Pressure switch will not close, or flame disturbance may result.

3. Total equivalent vent lengths under 10’ for 40,000 BTUH furnaces from 0 to 2000 ft. (0 to 610 M) above sea level require use of an outlet choke plate .

Failure to use an outlet choke when required may result in flame disturbance or flame sense lockout.

4. Not all fu rnace families include 140,000 BTUH input models.

5. Vent sizing for Canadian installa tions over 4500 ft (1370 M) above sea level are subject to acceptance by local authorities having j urisdiction.

6. Size both the combustion air and vent pipe independently, then use the larger size for both pipes.

7. Assume the two 45_ elbows equal one 90_ elbow. Wide radius elbows are desirable and may be required in some cases.

8. Elbow and pipe sections within the furnace casing and at the vent termination should not be included in vent length or elbow count.

9. The minimum pipe length is 5 ft. (2 M) linear feet (meters) for all application s.

10. Use 3 --- in. (76 mm) diameter ven t termin ation kit for installations requiring 4- --in. (102 mm) diameter pipe.

Therefore, 60mm pipe may NOT be used;

try 80 mm

9

RETURN AIR TEMPERATURE

This furnace is designed for continuous return--air minimum temperature of 60_F(15_C) db or intermittent operation down to 55_F(13_C)
db such as when used with a night setback thermometer. Return--air temperature must not exceed 80_F(27_C) db. Failure to follow these
return air limits may affect reliability of heat exchangers, motors and controls.

80 / 27˚C

SUPPLY AIR

60

/ 16˚C

PG92SCS

MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS

POSITION CLEARANCE

Rear 0(0mm)

Front (Combustion air openings in furnace and in structure) 1in.(25mm)

Required for service** 24 in. (610 mm)*

All Sides of Supply Plenum** 1in.(25mm)

Sides 0(0mm)

Ve n t 0(0mm)

* Recommended
**Consult your local building codes

Top of Furnace 1in. (25mm)

A10490

COMBUSTION--AIR PIPE FOR NON--DIRECT (1--PIPE) VENT APPLICATION

FIELD-SUPPLIED
2-IN. (51 mm) DIA.
MITERED RADIUS
PVC 90° ELBOW

12” (300 mm) MINIMUM

NOTE: See Installation Instructions for specific venting configurations.

FIELD-SUPPLIED
2-IN. (51 mm) DIA.
PVC PIPE

A12376

10

RESTRICTIONS IN HORIZONTAL CONFIGURATIONS

HORIZONTAL LEFT TOP
RETURN NOT PERMITTED
FOR ANY MODEL.
SEE TABLE BELOW.

3

RETURN

AIR

*HORIZONTAL LEFT BOTTOM RETURN
NOT PERMITTED FOR ALL MODELS.
SEE TABLE BELOW.

3ONLY

1

COMBINATION OF 1 & 2

INPUT*

40,000

60,000

80,000

SUPPLY

AIR

*

*RETURN

CASING

WIDTH

INCHES

CONNECTION AT

1ONLY

AIR

HORIZONTAL LEFT RETURN AIR CONNECTIONS

CONNECTION AT

2ONLY

2

CONNECTION AT

14 3/16 YES YES NO YES

17 1/2 YES YES NO YES

14 3/16 YES YES NO YES

17 1/2 YES NO NO YES
17 1/2 YES YES NO YES

21 YES YES NO YES
100,000 21 YES YES NO YES
120,000 24 1/2 YES YES NO YES

PG92SCS

A14006

HORIZONTAL RIGHT RETURN AIR CONNTECIONS

CONNECTION AT

2ONLY

CONNECTION AT

3ONLY

COMBINATION OF 1 & 2

INPUT*

40,000

60,000

80,000

CASING

WIDTH

INCHES

CONNECTION AT

1ONLY

14 3/16 YES YES NO YES

17 1/2 YES YES NO YES

14 3/16 YES YES NO YES

17 1/2 YES YES NO YES
17 1/2 YES YES NO YES

21 YES YES NO YES
100,000 21 YES YES NO YES
120,000 24 1/2 YES YES NO YES

NOTE: Not all models may be available in all casing sizes shown in the table above.

11

DOWNFLOW SUBBASE

LOCATING

TAB

11/

4-IN. TYP

PLENUM
OPENING

A

LOCATING

TAB

B

4

3

D

2

1

FACTORY-SUPPLIED

FIELD-INSTALLED

INSULATION

C

A97427

Assembled

DIMENSIONS (IN. / MM)

PG92SCS

FURNACE

CASING WIDTH

14---3/16 (360)

17---1/2 (445)

21 (533)

24---1/2 (622)

*The plenum should be constructed 1/4---in. (6 mm) smaller in width and depth than the plenum dimensions shown above.

FURNACE IN DOWNFLOW

APPLICATION

Furnace with or without Cased Coil

Assembly or Coil Box

Furnace with or without Cased Coil

Assembly or Coil Box

Furnace with or without Cased Coil

Assembly or Coil Box

Furnace with or without Cased Coil

Assembly or Coil Box

PLENUM OPENING* FLOOR OPENING

A B C D

11---3/16

(322)

15---1/8

(384)

18---5/8

(396)

22---1/8

(562)

19 (483)

19 (483)

19 (483)

19 (483)

13---7/16

(341)

16---3/4

(426)

20---1/4

(514)

23---3/4

(603)

Disassembled

20---5/8

(600)

20---5/8

(600)

20---5/8

(600)

20---5/8

(600)

1

2

3

4

A88207

HOLE NO. FOR

WIDTH

ADJUSTMENT

4

3

2

1

Concentric Vent Kit

A concentric vent kit allows vent and combustion--air pipes to
terminate through a single exit in a roof or side wall. One pipe
runs inside the other allowing venting through the inner pipe and
combustion air to be drawn in through the outer pipe.

A93086

Downflow Subbase

A88202

One base fits all furnace sizes. The base is designed to be installed
between the furnace and a combustible floor when no coil box is
used or when a coil box other than a Payne cased coil is used. It is
CSA design certified for use with Payne branded furnaces when
installed in downflow applications.

12

BLOWER

DOOR

SWITCH

BLK

WHT

GND

115-VOLT FIELD-

SUPPLIED

FUSED

DISCONNECT

BLK

WHT

JUNCTION
BOX

FIVE

WIRE

THREE-WIRE

HEATING-

ONLY

FURNACE

TYPICAL WIRING SCHEMATIC

W2

C

COM

O
N

W/W1

T

Y/Y2

R
O

R

L

G

24-VOLT

TERMINAL

BLOCK

NOTE 2

WCY RG

NOTE 1

NOTES: 1.

Connect Y/Y2-terminal as shown for proper operation.
Some thermostats require a "C" terminal connection as shown.

2.
If any of the original wire, as supplied, must be replaced, use

3.
same type or equivalent wire.

1-STAGE
THERMOSTAT
TERMINALS

CONDENSING

UNIT

FIELD 24-VOLT WIRING
FIELD 115-, 208/230-, 460-VOLT WIRING
FACTORY 24-VOLT WIRING
FACTORY 115-VOLT WIRING

FIELD-SUPPLIED

FUSED DISCONNECT

208/230- OR
460-VOLT
THREE
PHASE

208/230­VOLT
SINGLE

GND

PHASE

PG92SCS

A11401

13

DIMENSIONAL DRAWING

E

REV

1

SHT

20 5/8

[522.7]

21 1/16

[535.8]

[557.4]

21 15/16

26 3/8

[669.9]

[678.1]

29 1/2

[749.3]

28 3/4

[730.5]

26 11/16

AIR FLOW

3

[76.2]

1 3/4

[44.5]

AIR INTAKE

7/8

GAS CONN

[22.2]

7/8

3

[76.2 ]

PG92SCS

[22.2]

2 1/2

[63.5]

4

35

7/8

[101.6]

[889.0]

[22.2] POWER CONN

SIDE INLET

7/8

[22.2]

7/8

[22.2]

[442.3]

17 7/16

24

[609.7]

28 3/8

[720.4]

28 5/8

[726.9]

[757]

29 13/16

THERMOSTAT ENTRY

[420.9]

16 9/16

[458.6]

18 1/16

20 1/4

[513.9]

23 3/8

21 5/8

[549.5]

BOTTOM INLET

6 1/16

[154.0]

11/16

[17.5]

[592.0]

1 5/16

[668.8]

26 5/16

[33.3]

SD5024-4

PART NUMBER

NEXT SHEET

2

B

A

NOTES:

1. Doors may vary by model.

2. Minimum return-air openings at furnace, based on metal duct. If ex duct is used,

see ex duct manufacturer's recommendations for equivalent diameters.

a. For 800 CFM-16-in. (406 mm) round or 14 1/2 x 12-in. (368 x 305 mm) rectangle.

b. For 1200 CFM-20-in. (508 mm) round or 14 1/2 x 19 1/2-in. (368 x 495 mm) rectangle.

c. For 1600 CFM-22-in. (559 mm) round or 14 1/2 x 22 1/16-in. (368 x 560mm) rectangle.

d. Return air above 1800 CFM at 0.5 in. w.c. ESP on 24.5" casing, requires one of the following

congurations: 2 sides, 1 side and a bottom or bottom only. See Air Delivery table in this

document for specic use to allow for sucient airow to the furnace.

3. Vent and Combustion air pipes through blower compartment must

use accessory “Vent Kit - Through the Cabinet”. See accessory list for

current part number.

D

[58.4]

6 15/16

[176.1]

2 3/10

3

[76.2]

VENT

3

[76.2]

AIR INTAKE

[170.1]

6 11/16

TOP VIEW

[678.1]

26 11/16

26 3/8

[670.0]

25 1/8

[638.7]

23 5/16

[592.9]

20 5/8

[522.7]

19 1/8

OUTLET WIDTH

3

[76.2]

AIR INTAKE

[485.8]

AIR FLOW

5/8

[15.8]

1 3/4

AIR FLOW

[44.5]

GAS CONN

3

[76.2]

VENT

7/8

[22.2]

4

[101.6]

CONDENSATE DRAIN TRAP

LOCATION

2 1/2

[63.5]

7/8

[22.2]

32 5/8

[829.5]

28 5/8

[726.4]

[715.9]

28 3/16

23 7/16

7/8

[22.2] POWER CONN

7/8

[22.2]

SIDE INLET

[639.1]

25 3/16

[595.6]

22 15/16

20 1/4

[513.9]

[420.9]

16 9/16

14 13/16

7/8

[22.2]

THERMOSTAT ENTRY

[581.9]

[439.2]

17 5/16

[376.3]

C

WIDTH

BOTTOM RETURN

NOTE: ALL DIMENSIONS IN INCH [MM]

11/16

[17.5]

SEE NOTE #3

[668.8]

22

26 5/16

21

[534.0]

[558.3] (BOTH SIDES)

[25.4]

1 (BOTH SIDES)

PG92SCS

FURNACE SIZE

A B C D

CABINET WIDTH OUTLET WIDTH BOTTOM INLET WIDTH AIR INTAKE

30040 14---3/16 (361) 12 --- 1/2 (319) 12--- 9/16 (322) 7 --- 1/8 (181) 121.0 (55.0)
48060
48080 151.0 (68.6)

17--- 1/2 (445) 15--- 7/8 (403) 16 (406) 8--- 3/4 (222)

60080
48100 166.5 (75.7)

21 (533) 19--- 3/8 (492) 19---1/2 (495) 10 ---1/2 (267)
60100 166.5 (75.7)
60120 24 --- 1/2 (622) 22--- 7/8 (581) 23 (584) 12--- 1/4 (311) 184.0 (83.6)

14

SHIP WT.

LB (KG)

142.0 (64.5)

158.5 (72.0)

A12267

GUIDE SPECIFICATIONS

General

System Description

Furnish a ______________________ 4--way multipoise gas--fired
condensing furnace for use with natural gas or propane (factory-­authorized conversion kit required for propane).

Quality Assurance

Unit will be designed, tested and constructed to thecurrent ANSI Z

21.47/CSA 2.3 design standard for gas--fired central furnaces.
Unit will be third party certified by CSA to the current ANSI Z

21.47/CSA 2.3 design standard for gas--fired central furnaces. Unit
will carry the CSA Blue StarR and Blue FlameR labels. Unit
efficiency testing will be performed per the current DOE test
procedure as listed in the Federal Register.

Unit will be certified for capacity and efficiency and listed in the
latest AHRI Consumer’s Directory of Certified Efficiency Ratings.

Unit will carry the current Federal Trade Commission Energy
Guide efficiency label.

Delivery, Storage, and Handling

Unit will be shipped as single package only and is stored and
handled per unit manufacturer’s recommendations.

Warranty (for inclusion by specifying engineer)

U.S. and Canada only. Warranty certificate available upon request.

Equipment

Blower Wheel and PSC Blower Motor
Galvanized blower wheel shall be centrifugal type, statically and

dynamically balanced. Blower motor of PSC type shall be
permanently lubricated with sleeve bearings, of _______hp, and
have multiple speeds from 600--1200 RPM operating only when
motor inputs are provided. Blower motor shall be direct drive and
soft mounted to the blower scroll to reduce vibration transmission.

Filters
Furnace shall have reusable--type filters. Filter shall be ______ in.

(mm) X ________ in. (mm). An accessory highly efficient Media
Filter is available as an option. _____________ Media Filter.

Casing
Casing shall be of .030 in. thickness minimum, pre--painted steel.
Draft Inducer
Draft inducer motor shall be single--speed PSC design.

Motor

Primary Heat
Primary heat exchangers shall be 3--Pass corrosion--resistant

aluminized steel of fold--and--crimp sectional design and applied
operating under negative pressure.

Secondary Heat
Secondary heat exchangers shall be of a stainless steel

flow--through of fin--and--tube design and applied operating under
negative pressure.

Controls
Controls shall include a micro--processor--based integrated

electronic control board with at least 16 service troubleshooting
codes displayed via diagnostic flashing LED light on the control, a
self--test feature that checks all major functions of the furnace, and
a replaceable automotive--type circuit protection fuse. Multiple
operational settings available, including blower speeds for heating
and cooling.

Exchangers

Exchangers

Operating Characteristics

Heating capacity shall be _________________ Btuh input;
______________ Btuh output capacity.

Fuel Gas Efficiency shall be __________ AFUE.
Air delivery shall be ________________ cfm minimum at 0.50 in.

W.C. external static pressure.
Dimensions shall be: depth_________in. (mm); width

__________in. (mm); height___________in. (mm) (casing only).
Height shall be _________in. (mm) with A/C coil and
_________________in. (mm) overall with plenum.

Electrical Requirements

Electrical supply shall be 115 volts, 60 Hz, single--phase (nominal).
Minimum wire size shall be ________AWG; maximum fuse size
of HACR--type designated circuit breaker shall be _________
amps.

Special Features

Refer to section of the product data identifying accessories and
descriptions for specific features and available enhancements.

PG92SCS

15

PG92SCS

E2014 Payne Heating & Cooling Systems D 7310 W. Morris St. D Indianapolis, IN 46231 Edition Date: 12/14

Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.

C a t a l o g N o : S S --- P G 9 2 S C S --- 0 3

R e p l a c e s : S S --- P G 9 2 S C S --- 0 2

16