Paxton Automotive Novi Supercharger 1200, Novi 1200 Owner's Installation Manual

PaxFreehandBW/Lg-1.eps—11/11/03

Novi 1200 Supercharger

Block Ford-Carbureted System*

* Legal in California only for racing vehicles which may never be used upon a highway.

Paxton Automotive, 1300 Beacon Place, Oxnard CA 93033 • 805 604-1336

www.paxtonautomotive.com • M-F 8:00 AM - 4:30 PM PST

P/N: 4PFX020-010
©2004 Paxton Automotive Corp.
All Rights Reserved, Intl. Copr. Secured
28JUL04 v1.2(Univ.SBF Carb-4PFX v1.2)

Owner’s Installation Guide for the

Paxton Automotive

for the

Universal Small

FOREWORD

This manual provides information on the installation, maintenance and service of the Paxton
supercharger kit designed for small block Ford carbureted engines. Contact Paxton Automo­tive Corporation for any additional information regarding this kit and any of these modifica­tions at [phone] 7:00am-3:30pm PST.
An understanding of the information contained herein will help novices, as well as experi­enced technicians, to correctly install and receive the greatest possible benefit from their
Paxton supercharger. When reference is made in this manual to a brand name, number, spe­cific tool or technique, an equivalent product may be used in place of the item mentioned. All
information, illustrations and specifications contained herein are based on the latest product
information available at the time of this publication. All rights reserved to make changes at
any time without notice.

*** NOTE ***
This supercharger kit is not compatible with air conditioning as the A/C pulley is not
present on the supplied crank pulley.

NOTES

• The crank pulley supplied with this kit is designed to
accomodate the stock 1965 Mustang water pump*,
alternator and power steering. Vehicles with different
accessories may need custom spacing or elimination
of some accessories.

o be replaced).

• Distributor clearance to the carburetor enclosure
is minimal. Distributors must have a small diam­eter cap in order to fit. Additionally, tall distributors
such as an MSD PN 8354 installed on a 351W
contact the front of the carburetor enclosure and
should be replaced with an MSD PN 8578 (or
equivalent).

© 2004 PAXTON AUTOMOTIVE

All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or

translated into another language in any form, by any means without written permission

of Paxton Automotive.

P/N: 4PFX020-010
©2004 Paxton Automotive Corp.
All Rights Reserved, Intl. Copr. Secured
28JUL04 v1.2(Univ.SBF Carb-4PFX v1.2)

ii

TABLE OF CONTENTS

FOREWORD/NOTES .................................................................................................. ii

TABLE OF CONTENTS................................................................................................ iii

TOOL & SUPPLY REQUIREMENTS........................................................................... iv

PA RTS LIST ................................................................................................................. v

1. INTRODUCTION ................................................................................................................ 1-1

2. PREPARATION/REMOVAL ............................................................................................... 2-1

3. OIL FEED INSTALLATION ............................................................................................... 3-1

4. OIL DRAIN INSTALLATION ............................................................................................ 4-1

5. FUEL PUMP BOOST REFERENCE .................................................................................. 5-1

6. MOUNTING BRACKET/SUPERCHARGER INSTALLATION ..................................... 6-1

7. CARBURETOR ENCLOSURE INSTALLATION ............................................................. 7-1

8. AIR DUCTING INSTALLATION ....................................................................................... 8-1

9. CRANK PULLEY AND SUPERCHARGER DRIVE PULLEY INSTALLATION ........... 9-1

10. FINAL REASSEMBLY AND CHECK ............................................................................... 10-1

iii

All Rights Reserved, Intl. Copr. Secured

28JUL04 v1.2(Univ.SBF Carb-4PFX v1.2)

P/N: 4PFX020-010

©2004 Paxton Automotive Corp.

Universal Small Block Ford

Carbureted System

Installation Instructions

PLEASE READ CAREFULLY

This kit should only be installed by qualified mechanics. It is imperative that the correct
air/fuel mixture be maintained at all times. This Kit is to be supplied to competent
engine tuners for their completion by the addition of, and tuning of, an appropriate
carburetor unit.

This product is intended for use on healthy, well maintained engines. Installation on a
worn-out or damaged engine is not recommended and may result in failure of the engine.

Paxton Automotive is not responsible for engine damage. Installation on new
engines will not harm or adversely affect the break-in period so long as factory break­in procedures are followed.

For best performance and continued durability, please take note of the following key
points:

1. Use only premium grade fuel 91 octane or higher (R+M/2).

2. The engine must have stock or lower than stock compression ratio.

3. If the engine has been modified in any way, check with Paxton prior to using this product.

4. Always listen for any sign of detonation (pinging) and discontinue hard use (no boost) until

problem is resolved.

5. Perform an oil and filter change upon completion of this installation and prior to operating the
vehicle. Thereafter, always use a high grade SF rated engine oil or a high quality synthetic,
and change the oil and filter every 3000 miles.

6. Before beginning installation, replace all spark plugs with one to two step colder heat range

and reset timing to no more than 26° total or install a boost retard ignition. (Always follow the

procedures indicated in the factory repair manual.)

TOOL AND SUPPLY REQUIREMENTS:

• Factory Repair Manual

• 3/8" Drive and Socket Set: SAE and Metric

• 1/2" Drive and Socket Set: SAE and Metric

• Open End Wrenches: SAE and Metric

• Center Punch

• Oil Filter, and Wrench

• Heavy Grease

• Silicone Sealer

• Teflon Paste Sealant

• TAP, 3/8-18 NPT

• SF Rated Quality Engine Oil

• Loctite Sealer #RC-609

P/N: 4PFX020-010
©2004 Paxton Automotive Corp.
All Rights Reserved, Intl. Copr. Secured
28JUL04 v1.2(Univ.SBF Carb-4PFX v1.2)

iv

1964-1968 Mustang Small Block

Ford, Passenger Side Carbureted

Part No. 1001839

SUPERCHARGERS & FUEL SYSTEMS

PARTS LIST

IMPORTANT: Before beginning installation, verify that all parts are included in the kit. Report any shortages

or damaged parts immediately.

Part Number Description Quantity Part Number Description Quantity

1016116 S/C ASSY, NOVI 1200, CW, CRV 1

2A038-370 S/C PULLEY Ø3.70 8-GROOVE 1
2A048-575 BELT, 57.5" 1

4PFX118-021 S/C DRIVE ASSY 3 OR 4 BOLT 1

4FA111-042 S/C BELT TENSIONER ASSY, H.O. 1
4PFX017-933 SPACER, SBF C/P 1
4PFX018-021 CRANK PULLEY, SBF CARB 1
7A375-151 3/8-16 X 1.5 HXHD GR8 4
7A375-250 3/8-16 X GR8 HX 3
7K375-040 3/8 AN960 FLAT WASHER, PLATED 4

8PM205-012 CARB.ENCL ASSY, SBF CARB 1

8PM105-012 ENCL. STD. MACH. ASSY 1
8PM003-051 CARB CVR, PAXTON 1
7P500-087 PLUG BTNHD, AN-8 WITH 0-RING, BLK 3
7A312-078 5/16-18 X 3/4 HOSE 16
7P187-102 FITTING, -3 TO 1/4 HOSE 3
7P187-103 PLUG, -3 BUTTONHEAD WITH O-RING 1
7P375-104 PLUG, OIL HOLE 3
7A312-252 5/16 STUD 4
7F312-024 6/16-24 JAM NUT 4
7J312-000 5/16 FLAT WASHER-SAE 4
7U100-003 O-RING, -3 4
7U100-008 O-RING, -8 3
8M001-018 GASKET, 90MM THROTTLE BODY 1
7C011-050 10-32 PLUG SCREW 1
7U100-020 10-32 GASKET 1
8M001-017 HOLLEY 4-BARREL BASE GASKET 2
7P250-084 1/4 NPT X 1/2 X 90 BARB 1

8M110-600 ASSY, THROTTLE 64-68 MUSTANG 1

2A017-031 SPACER, THROTTLE ENCL. .313 ID 1
4PFX017-200 SPACER, 64-68 MUSTANG THROTTLE ARM, 2” 1
7A375-075 3/8-16 X 3/4 GR5 HXHD ZINC 1
7C010-052 10-24 X 1/2 SS BHCS 4
7C010-077 10-24 X 3/4 SS BHCS 5
7C010-187 3/16 ROD END RH WITH NUT 2
7C010-188 3/16 ROD END LH WITH NUT 2
7C011-075 10-32 SCREW 1
7F010-001 NUT, THROTTLE 1
7F010-033 10-32 NUT 1
7J010-001 #10 FLAT WASHER 8
7J010-687 WASHER, THROTTLE 1
7J375-044 3/8 SAE WASHER, PLTD 2
8M010-010 BRACKET, IDLE 1
8M010-040 THROTTLE ARM INNER 2
8M010-050 THROTTLE SHAFT 1
8M010-070 RETAINER, SPRING ENCL. 1
8M010-080 RETAINER, SPRING THROTTLE 1
8M010-090 SPRING, THROTTLE ENCL. 1
8M010-140 SHAFT, 5/16 HEX 1
8M010-600 SHAFT, THROTTLE 64-66 MUSTANG 1

4PFX110-044 MTG PLATE ASSY, PASSENGER SIDE 1

4PFX010-034 PRIMARY MTG PLATE 1
4PFX010-044 S/C MTG PLATE 1
2A017-101-400 SPACER, SBF MTG PLATE 4
2A017-101-121 SPACER, FORD ALTERNATOR 1
7A375-500 3/8-16 X 5” HXHD GR8 3
7A375-575 3/8-16 X 5.75 HXHD GR8 PLT 2
7A375-126 3/8-16 X 1.25 HXHD GR8 PLT 6
7A437-550 7/16”-14 X 5-1/2” HXHD 1
7K375-040 3/8 AN960 FLAT WASHER, PLATED 11

4PFX130-026 OIL FEED LINE ASSY, SBF CARB 1

7P125-004 1/8 NPT 90° X -4 JIC FTG 1
7P250-034 1/4 NPT X 1/4 NPT STRT T 1
7P250-250 1/4” NPT STR X -4 JIC FTG 1
7U250-090-240 OIL FEED HOSE, 24” -4 X 90° 1
7U100-055 TIE WRAP, 6” NYLON 2

4PFX130-036 OIL DRAIN ASSY, SBF CARB 1

7P375-017 3/8 NPT X 1/2 BEADED HOSE BARB 1
7R001-008 #8 STNLS HOSE CLAMP 2
7U030-036 1/2” OIL DRAIN HOSE 1.5

4PFX112-021 AIR DISCHARGE ASSY, SBF CARB 1

4PFX012-021 MACH, DISCH TUBE SBF CARB 1
7P750-100 3/4 NPT X 1” HOSE FITTING 1
7PS300-275 REDUCER, 3.00 - 2.75 1
7PS350-300 REDUCER, BLK 3.5 - 3 X 2LG, MOD 1
7R002-016 #16 GOLDSEAL, HOSE CLAMP 2
7R002-044 #44 SAE TYPE F SS HOSE CLAMP 1
7R002-048 #48 SAE TYPE F SS HOSE CLAMP 2
7R002-056 #56 SAE TYPE F SS HOSE CLAMP 1
7U030-046 5/32” VACUUM LINE 2
7U034-016 1” GS HOSE 0.25
8D001-001 STD COMP BYPASS VALVE 1
8M003-041 MACHINE, 3.5 FLANGE 1
8H040-075 1" AIR FILTER 1

4PFX101-001 FUEL ASSEMBLY, SBF CARB 1

7P125-016 1/8 NPT PLUG 1
7P250-043 1/4 NPT X 5/16” BARB 1
7P250-047 1/4 NPT TO 3/8” BARB 90° 1
7P250-141 -6 HOSE END, 90° 1
7P500-083 AN -8 HOSE END, STRAIGHT 1
7P500-084 MALE TEE -8, -6, -6 1
7P500-085 FITTING, -8 BULKHEAD WITH O-RING 1
7P500-086 120° -8 TO 1/2” BARB 1
7P500-087 PLUG, AN-8 O-RING PORT 1
7P500-089 FITTING, -8 BULKHEAD NUT, BLK 1
7P500-377 AN-8 MALE SHORT -6 MALE STD 1
7R001-006 #6 STNLS HOSE CLAMP 4
7U030-046 5/32” VACUUM LINE 4.5
7U032-016 3/8” EFI FUEL HOSE HI-PSR 2.5
7U100-008 O-RING, -8 3
8H040-020 FUEL FILTER, INLINE 3/8” 1
8F001-120 FUEL PUMP, SBF CARB 120 GPH, 6 PSI 1

4PFX020-010 INSTALLATION INSTRUCTIONS, SBF CARB 1

8H040-350 AIR FILTER, 3.5” FLG X 5.1L OFFSET 1

008575 S/C STRT INFO PKG ASSY PAXTON 1

8M110-100 HOLLEY 4150 FLOAT BOWL LINE ASSY 1

8M110-120 DEMO FLOAT BOWL LINE ASSY W/FTGS 1

ADDITIONAL PARTS NEEDED FOR COMPLETE INSTALLATION

1) HOLLEY 4150 OR DEMON STYLE MECHANICAL SECONDARY

CARBURETOR

v

All Rights Reserved, Intl. Copr. Secured

28JUL04 v1.2(Univ.SBF Carb-4PFX v1.2)

P/N: 4PFX020-010

©2004 Paxton Automotive Corp.

1964-1968 Mustang Small Block

Ford, Driver Side Carbureted

Part No. 1001840

SUPERCHARGERS & FUEL SYSTEMS

PARTS LIST

IMPORTANT: Before beginning installation, verify that all parts are included in the kit. Report any shortages

or damaged parts immediately.

Part Number Description Quantity Part Number Description Quantity

1016117 S/C ASSY, NOVI 1200, CW, STR 1

2A038-370 S/C PULLEY Ø3.70 8-GROOVE 1
2A048-575 BELT, 57.5" 1

4PFX118-021 S/C DRIVE ASSY 3 OR 4 BOLT 1

4FA111-042 S/C BELT TENSIONER ASSY, H.O. 1
4PFX017-933 SPACER, SBF C/P 1
4PFX018-021 CRANK PULLEY, SBF CARB 1

7A375-151 3/8-16 x 1.5 HXHD GR8 4
7A375-250 3/8-16 x GR8 HX 3
7K375-040 3/8 AN960 FLAT WASHER, PLATED 4

8PM205-012 CARB.ENCL ASSY, SBF CARB 1

8PM105-012 ENCL. STD. MACH. ASSY 1
8PM003-051 CARB CVR, PAXTON 1

7P500-087 PLUG BTNHD, AN-8 WITH 0-RING, BLK 3
7A312-078 5/16-18 x 3/4 HOSE 16
7P187-102 FITTING, -3 TO 1/4 HOSE 3
7P187-103 PLUG, -3 BUTTONHEAD WITH O-RING 1
7P375-104 PLUG, OIL HOLE 3
7A312-252 5/16 STUD 4

7F312-024 6/16-24 JAM NUT 4

7J312-000 5/16 FLAT WASHER-SAE 4
7U100-003 O-RING, -3 4
7U100-008 O-RING, -8 3
8M001-018 GASKET, 90MM THROTTLE BODY 1
7C011-050 10-32 PLUG SCREW 1
7U100-020 10-32 GASKET 1
8M001-017 HOLLEY 4-BARREL BASE GASKET 2
7P250-084 1/4 NPT x 1/2 x 90 BARB 1

8M110-600 ASSY, THROTTLE 64-68 MUSTANG 1

2A017-031 SPACER, THROTTLE ENCL. .313 ID 1

4PFX017-200SPACER, 64-68 MUSTANG THROTTLE ARM, 2” 1

7A375-075 3/8-16 x 3/4 GR5 HXHD ZINC 1
7C010-052 10-24 x 1/2 SS BHCS 4
7C010-077 10-24 x 3/4 SS BHCS 5
7C010-187 3/16 ROD END RH WITH NUT 2
7C010-188 3/16 ROD END LH WITH NUT 2
7C011-075 10-32 SCREW 1

7F010-001 NUT, THRO TTLE 1

7F010-033 10-32 NUT 1

7J010-001 #10 FLAT WASHER 8

7J010-687 WASHER, THROTTLE 1

7J375-044 3/8 SAE WASHER, PLTD 2
8M010-010 BRACKET, IDLE 1
8M010-040 THROTTLE ARM INNER 2
8M010-050 THROTTLE SHAFT 1
8M010-070 RETAINER, SPRING ENCL. 1
8M010-080 RETAINER, SPRING THROTTLE 1
8M010-090 SPRING, THR OTTLE ENCL. 1
8M010-140 SHAFT, 5/16 HEX 1
8M010-600 SHAFT, THROTTLE 64-66 MUSTANG 1

4PFX110-034 MTG PLATE ASSY, DRIVER SIDE 1

4PFX010-034 PRIMARY MTG PLATE 1
4PFX010-044 S/C MTG PLATE 1

2A017-101-475 SPACER, SBF MTG PLATE 4

7A375-650 3/8-16 x 6.5” HXHD GR8 2
7A375-575 3/8-16 x 5.75 HXHD GR8 PLT 2
7A375-126 3/8-16 x 1.25 HXHD GR8 PLT 6
7A437-650 7/16”-14 x 6.5” HXHD 1
7K375-040 3/8 AN960 FLAT WASHER, PLATED 11

4PFX130-026 OIL FEED LINE ASSY, SBF CARB 1

7P125-004 1/8 NPT 90° x -4 JIC FTG 1
7P250-034 1/4 NPT x 1/4 NPT STRT T 1
7P250-250 1/4” NPT STR X -4 JIC FTG 1

7U250-090-240 OIL FEED HOSE, 24” -4 x 90° 1

7U100-055 TIE WRAP, 6” NYLON 2

4PFX130-036 OIL DRAIN ASSY, SBF CARB 1

7P375-017 3/8 NPT x 1/2 BEADED HOSE BARB 1
7R001-008 #8 STNLS HOSE CLAMP 2
7U030-036 1/2” OIL DRAIN HOSE 1.5

4PFX212-040 AIR DISCHARGE ASSY, DRVER SIDE 1

4PFX112-040 DISCH TUBE DRIVER SIDE 1

7PS275-200 SLEEVE, 2,75 x 2.0” BLACK 1
7PS350-275 REDUCER, BLK 3.5 - 2.75 1

7R002-016 #16 GOLDSEAL, HOSE CLAMP 2
7R002-044 #44 SAE TYPE F SS HOSE CLAMP 3
7R002-056 #56 SAE TYPE F SS HOSE CLAMP 1
7U030-046 5/32” VACUUM LINE 3’
7U034-016 1” GS HOSE 0.25
8D001-001 STD COMP BYPASS VALVE 1
8M003-011 MACHINE, 3.5 FLANGE 90° 1
8H040-075 1" AIR FILTER 1

4PFX101-001 FUEL ASSEMBLY, SBF CARB 1

7P125-016 1/8 NPT PLUG 1
7P250-043 1/4 NPT x 5/16” BARB 1
7P250-047 1/4 NPT TO 3/8” BARB 90° 1
7P250-141 -6 HOSE END, 90° 1
7P500-083 AN -8 HOSE END, STRAIGHT 1
7P500-084 MALE TEE -8, -6, -6 1
7P500-085 FITTING, -8 BULKHEAD WITH O-RING 1
7P500-086 120° -8 TO 1/2” BARB 1
7P500-087 PLUG, AN-8 O-RING PORT 1
7P500-089 FITTING, -8 BULKHEAD NUT, BLK 1
7P500-377 AN-8 MALE SHORT -6 MALE STD 1
7R001-006 #6 STNLS HOSE CLAMP 4
7U030-046 5/32” VACUUM LINE 4.5
7U032-016 3/8” EFI FUEL HOSE HI-PSR 2.5
7U100-008 O-RING, -8 3
8H040-020 FUEL FILTER, INLINE 3/8” 1
8F001-120 FUEL PUMP, SBF CARB 120 GPH, 6 PSI 1

4PFX020-010 INSTALLATION INSTRUCTIONS, SBF CARB 1

8H040-350 AIR FILTER, 3.5” FLG x 5.1L OFFSET 1

008575 S/C STRT INFO PKG ASSY PAXTON 1
8M110-100 HOLLEY 4150 FLOAT BOWL LINE ASSY 1
8M110-120 DEMON FLOAT BOWL LINE ASSY W/FTGS 1

ADDITIONAL PARTS NEEDED FOR COMPLETE INSTALLATION

1) HOLLEY 4150 OR DEMON STYLE MECHANICAL SECONDARY

CARBURETOR

P/N: 4PFX020-010
©2004 Paxton Automotive Corp.
All Rights Reserved, Intl. Copr. Secured
28JUL04 v1.2(Univ.SBF Carb-4PFX v1.2)

vi

Universal Small Block

Ford, Passenger Side Carbureted

Part No. 1001841

SUPERCHARGERS & FUEL SYSTEMS

PARTS LIST

IMPORTANT: Before beginning installation, verify that all parts are included in the kit. Report any shortages

or damaged parts immediately.

Part Number Description Quantity Part Number Description Quantity

1016118 S/C ASSY, NOVI 1200, CW, CRV 1

4PFX118-021 S/C DRIVE ASSY 3 OR 4 BOLT 1

4FA111-042 S/C BELT TENSIONER ASSY, H.O. 1
4PFX017-933 SPACER, SBF C/P 1
4PFX018-021 CRANK PULLEY, SBF CARB 1
7A375-151 3/8-16 X 1.5 HXHD GR8 4
7A375-250 3/8-16 X GR8 HX 3
7K375-040 3/8 AN960 FLAT WASHER, PLATED 4

8PM205-012 CARB.ENCL ASSY, SBF CARB 1

8PM105-012 ENCL. STD. MACH. ASSY 1
8PM003-051 CARB CVR, PAXTON 1
7P500-087 PLUG BTNHD, AN-8 WITH 0-RING, BLK 3
7A312-078 5/16-18 X 3/4 HOSE 16
7P187-102 FITTING, -3 TO 1/4 HOSE 3
7P187-103 PLUG, -3 BUTTONHEAD WITH O-RING 1
7P375-104 PLUG, OIL HOLE 3
7A312-252 5/16 STUD 4
7F312-024 6/16-24 JAM NUT 4
7J312-000 5/16 FLAT WASHER-SAE 4
7U100-003 O-RING, -3 4
7U100-008 O-RING, -8 3
8M001-018 GASKET, 90MM THROTTLE BODY 1
7C011-050 10-32 PLUG SCREW 1
7U100-020 10-32 GASKET 1
8M001-017 HOLLEY 4-BARREL BASE GASKET 2
7P250-084 1/4 NPT X 1/2 X 90 BARB 1

4PFX110-044 MTG PLATE ASSY, PASSENGER SIDE 1

4PFX010-034 PRIMARY MTG PLATE 1
4PFX010-044 S/C MTG PLATE 1
2A017-101-400 SPACER, SBF MTG PLATE 4
2A017-101-121 SPACER, FORD ALTERNATOR 1
7A375-500 3/8-16 X 5” HXHD GR8 3
7A375-575 3/8-16 X 5.75 HXHD GR8 PLT 2
7A375-126 3/8-16 X 1.25 HXHD GR8 PLT 6
7A437-550 7/16”-14 X 5-1/2” HXHD 1
7K375-040 3/8 AN960 FLAT WASHER, PLATED 11

4PFX130-026 OIL FEED LINE ASSY, SBF CARB 1

7P125-004 1/8 NPT 90° X -4 JIC FTG 1
7P250-034 1/4 NPT X 1/4 NPT STRT T 1
7P250-250 1/4” NPT STR X -4 JIC FTG 1
7U250-090-240 OIL FEED HOSE, 24” -4 X 90° 1
7U100-055 TIE WRAP, 6” NYLON 2

4PFX130-036 OIL DRAIN ASSY, SBF CARB 1

7P375-017 3/8 NPT X 1/2 BEADED HOSE BARB 1
7R001-008 #8 STNLS HOSE CLAMP 2
7U030-036 1/2” OIL DRAIN HOSE 1.5

4PFX112-021 AIR DISCHARGE ASSY, SBF CARB 1

4PFX012-021 MACH, DISCH TUBE SBF CARB 1
7P750-100 3/4 NPT X 1” HOSE FITTING 1
7PS300-275 REDUCER, 3.00 - 2.75 1
7PS350-300 REDUCER, BLK 3.5 - 3 X 2LG, MOD 1
7R002-016 #16 GOLDSEAL, HOSE CLAMP 2
7R002-044 #44 SAE TYPE F SS HOSE CLAMP 1
7R002-048 #48 SAE TYPE F SS HOSE CLAMP 2
7R002-056 #56 SAE TYPE F SS HOSE CLAMP 1
7U030-046 5/32” VACUUM LINE 2
7U034-016 1” GS HOSE 0.25
8D001-001 STD COMP BYPASS VALVE 1
8M003-041 MACHINE, 3.5 FLANGE 1
8H040-075 1" AIR FILTER 1

008575 S/C STRT INFO PKG ASSY PAXTON 1

4PFX020-010 INSTALLATION INSTRUCTIONS SBF CARB 1

4PFX101-001 FUEL ASSEMBLY, SBF CARB 1

7P125-016 1/8 NPT PLUG 1
7P250-043 1/4 NPT X 5/16” BARB 1
7P250-047 1/4 NPT TO 3/8” BARB 90° 1
7P250-141 -6 HOSE END, 90° 1
7P500-083 AN -8 HOSE END, STRAIGHT 1
7P500-084 MALE TEE -8, -6, -6 1
7P500-085 FITTING, -8 BULKHEAD WITH O-RING 1
7P500-086 120° -8 TO 1/2” BARB 1
7P500-087 PLUG, AN-8 O-RING PORT 1
7P500-089 FITTING, -8 BULKHEAD NUT, BLK 1
7P500-377 AN-8 MALE SHORT -6 MALE STD 1
7R001-006 #6 STNLS HOSE CLAMP 4
7U030-046 5/32” VACUUM LINE 4.5
7U032-016 3/8” EFI FUEL HOSE HI-PSR 2.5
7U100-008 O-RING, -8 3
8H040-020 FUEL FILTER, INLINE 3/8” 1
8F001-120 FUEL PUMP, SBF CARB 120 GPH, 6 PSI 1

ADDITIONAL PARTS NEEDED FOR COMPLETE INSTALLATION

1) HOLLEY 4150 OR DEMON STYLE MECHANICAL SECONDARY

CARBURETOR

2) FUEL LINE ASSEMBLY
HOLLEY: 8M110-100 (USES STANDARD INVERTED FLARE BOWL

INLET FITTINGS)

DEMON: 8M110-120 (SUPPLIED WITH AN -6 BOWL INLET FITTINGS)

3) THROTTLE ASSEMBLY

1964-1968 MUSTANG: 8M110-600
1969 MUSTANG: 8M110-069

UNIVERSAL: 8M110-010 (REQUIRES CUSTOMER FABRICATED

BRACKET)

4) SUPERCHARGER PULLEY AND BELT

3.70": 2A038-370 S/C PULLEY (USES 2A048-575 - 57.5" BELT)

3.33": 2A038-333 S/C PULLEY (USES 2A048-565 - 56.5" BELT)

5) AIR FILTER (CUSTOM AIR INLET MAY BE NEEDED FOR NON-

STANDARD APPLICATIONS)

8H040-350: AIR FILTER 3.5" FLG x 5.1L (CAN BE ORDERED

SEPARATELY)

8H040-035: AIR FILTER 3.5" FLG x 3.7"L OFFSET (CAN BE ORDERED

SEPARATELY)

6) UNIVERSAL BATTERY RELOCATION ASSEMBLY: 8N150-010
(OPTIONAL, MAY BE REQUIRED FOR PASSENGER SIDE
INSTALLATIONS)

v

All Rights Reserved, Intl. Copr. Secured

28JUL04 v1.2(Univ.SBF Carb-4PFX v1.2)

P/N: 4PFX020-010

©2004 Paxton Automotive Corp.

Universal Small Block

Ford, Driver Side Carbureted

Part No. 1001842

SUPERCHARGERS & FUEL SYSTEMS

PARTS LIST

IMPORTANT: Before beginning installation, verify that all parts are included in the kit. Report any shortages

or damaged parts immediately.

Part Number Description Quantity Part Number Description Quantity

1016119 S/C ASSY, NOVI 1200, CW, STR 1

4PFX118-021 S/C DRIVE ASSY 3 OR 4 BOLT 1

4FA111-042 S/C BELT TENSIONER ASSY, H.O. 1
4PFX017-933 SPACER, SBF C/P 1
4PFX018-021 CRANK PULLEY, SBF CARB 1

7A375-151 3/8-16 x 1.5 HXHD GR8 4
7A375-250 3/8-16 x GR8 HX 3
7K375-040 3/8 AN960 FLAT WASHER, PLATED 4

8PM205-012 CARB.ENCL ASSY, SBF CARB 1

8PM105-012 ENCL. STD. MACH. ASSY 1
8PM003-051 CARB CVR, PAXTON 1

7P500-087 PLUG BTNHD, AN-8 WITH 0-RING, BLK 3
7A312-078 5/16-18 x 3/4 HOSE 16
7P187-102 FITTING, -3 TO 1/4 HOSE 3
7P187-103 PLUG, -3 BUTTONHEAD WITH O-RING 1
7P375-104 PLUG, OIL HOLE 3
7A312-252 5/16 STUD 4
7F312-024 6/16-24 JAM NUT 4
7J312-000 5/16 FLAT WASHER-SAE 4
7U100-003 O-RING, -3 4
7U100-008 O-RING, -8 3

8M001-018 GASKET, 90mm THROTTLE BODY 1

7C011-050 10-32 PLUG SCREW 1
7U100-020 10-32 GASKET 1

8M001-017 HOLLEY 4-BARREL BASE GASKET 2

7P250-084 1/4 NPT x 1/2 x 90 BARB 1

4PFX110-034 MTG PLATE ASSY, PASSENGER SIDE 1

4PFX010-034 PRIMARY MTG PLATE 1
4PFX010-044 S/C MTG PLATE 1

2A017-101-475 SPACER, SBF MTG PLATE 4

7A375-650 3/8-16 x 6.5" HXHD GR8 2
7A375-575 3/8-16 x 5.75 HXHD GR8 PLT 2
7A375-126 3/8-16 x 1.25 HXHD GR8 PLT 6
7A437-650 7/16"-14 x 6.5" HXHD 1
7K375-040 3/8 AN960 FLAT WASHER, PLATED 11

4PFX130-026 OIL FEED LINE ASSY, SBF CARB 1

7P125-004 1/8 NPT 90° x -4 JIC FTG 1
7P250-034 1/4 NPT x 1/4 NPT STRT T 1
7P250-250 1/4” NPT STR x -4 JIC FTG 1

7U250-090-240 OIL FEED HOSE, 24" -4 x 90° 1

7U100-055 TIE WRAP, 6" NYLON 2

4PFX130-036 OIL DRAIN ASSY, SBF CARB 1

7P375-017 3/8 NPT x 1/2 BEADED HOSE BARB 1
7R001-008 #8 STNLS HOSE CLAMP 2
7U030-036 1/2" OIL DRAIN HOSE 1.5

4PFX212-040

4PFX112-040 DISCH TUBE SBF CARB 1

7PS275-200 SLEEVE, 2,75 x 2.0” BLACK 1

7PS350-275 REDUCER, BLK 3.50 - 2.75 1

7R002-016 #16 GOLDSEAL, HOSE CLAMP 2
7R002-044 #44 SAE TYPE F SS HOSE CLAMP 3
7R002-056 #56 SAE TYPE F SS HOSE CLAMP 1
7U030-046 5/32" VACUUM LINE 3'
7U034-016 1" GS HOSE 0.25
8D001-001 STD COMP BYPASS VALVE 1

8M003-011 MACHINE, 3.5 FLANGE 90° 1

8H040-075 1" AIR FILTER 1

008575 S/C Strt Info Pkg Assy Paxton 1

4PFX020-010 Installation Instructions SBF Carb 1

AIR DISCHARGE ASSY, DRIVER SBF CARB

1

4PFX101-001 FUEL ASSEMBLY, SBF CARB 1

7P125-016 1/8 NPT PLUG 1
7P250-043 1/4 NPT x 5/16” BARB 1
7P250-047 1/4 NPT TO 3/8” BARB 90° 1
7P250-141 -6 HOSE END, 90° 1
7P500-083 AN -8 HOSE END, STRAIGHT 1
7P500-084 MALE TEE -8, -6, -6 1
7P500-085 FITTING, -8 BULKHEAD WITH O-RING 1
7P500-086 120° -8 TO 1/2” BARB 1
7P500-087 PLUG, AN-8 O-RING PORT 1
7P500-089 FITTING, -8 BULKHEAD NUT, BLK 1
7P500-377 AN-8 MALE SHORT -6 MALE STD 1
7R001-006 #6 STNLS HOSE CLAMP 4
7U030-046 5/32” VACUUM LINE 4.5
7U032-016 3/8” EFI FUEL HOSE HI-PSR 2.5
7U100-008 O-RING, -8 3
8H040-020 FUEL FILTER, INLINE 3/8” 1
8F001-120 FUEL PUMP, SBF CARB 120 GPH, 6 PSI 1

ADDITIONAL PARTS NEEDED FOR COMPLETE INSTALLATION

1) HOLLEY 4150 OR DEMON STYLE MECHANICAL SECONDARY

CARBURETOR

2) FUEL LINE ASSEMBLY
HOLLEY: 8M110-100 (USES STANDARD INVERTED FLARE BOWL

INLET FITTINGS)

DEMON: 8M110-120 (SUPPLIED WITH AN -6 BOWL INLET FITTINGS)

3) THROTTLE ASSEMBLY

1964-1968 MUSTANG: 8M110-600
1969 MUSTANG: 8M110-069
UNIVERSAL: 8M110-010 (REQUIRES CUSTOMER FABRICATED

BRACKET)

4) SUPERCHARGER PULLEY AND BELT

3.70": 2A038-370 S/C PULLEY (USES 2A048-575 - 57.5" BELT)

3.33": 2A038-333 S/C PULLEY (USES 2A048-565 - 56.5" BELT)

5) AIR FILTER (CUSTOM AIR INLET MAY BE NEEDED FOR NON-

STANDARD APPLICATIONS)
8H040-350: AIR FILTER 3.5" FLG x 5.1L (CAN BE ORDERED

SEPARATELY)
8H040-035: AIR FILTER 3.5" FLG x 3.7"L OFFSET (CAN BE ORDERED

SEPARATELY)

6) UNIVERSAL BATTERY RELOCATION ASSEMBLY: 8N150-010
(OPTIONAL, MAY BE REQUIRED FOR PASSENGER SIDE
INSTALLATIONS)

P/N: 4PFX020-010
©2004 Paxton Automotive Corp.
All Rights Reserved, Intl. Copr. Secured
28JUL04 v1.2(Univ.SBF Carb-4PFX v1.2)

vi

1969 Mustang 351W Small Block

Ford, Passenger Side Carbureted

Part No. 1001843

SUPERCHARGERS & FUEL SYSTEMS

PARTS LIST

IMPORTANT: Before beginning installation, verify that all parts are included in the kit. Report any short-

ages or damaged parts immediately.

Part Number Description Quantity Part Number Description Quantity

1016122 S/C ASSY, NOVI 1200, CW, CRV 1969 1

2A038-370 S/C PULLEY Ø3.70 8-GROOVE 1
2A048-575 BELT, 57.5" 1

4PFX117-069 S/C DRIVE ASSY SBF, 69 351 1

4FA111-042 S/C BELT TENSIONER ASSY, H.O. 1
4PFX017-069 SPACER, SBF C/P, 69 351 1
4PFX018-021 CRANK PULLEY, SBF CARB 1
7A375-250 3/8-16 X GR8 HX 3
7K375-040 3/8 AN960 FLAT WASHER, PLATED 3

8PM205-012 CARB.ENCL ASSY, SBF CARB 1

8PM105-012 ENCL. MACH. ASSY, SBF 1
8PM003-051 CARB CVR, PAXTON 1
7P500-087 PLUG BTNHD, AN-8 WITH 0-RING, BLK 3
7A312-078 5/16-18 X 3/4 HOSE 16
7P187-102 FITTING, -3 TO 1/4 HOSE 3
7P187-103 PLUG, -3 BUTTONHEAD WITH O-RING 1
7P375-104 PLUG, OIL HOLE 3
7A312-252 5/16 STUD 4
7F312-024 6/16-24 JAM NUT 4
7J312-000 5/16 FLAT WASHER-SAE 4
7U100-003 O-RING, -3 4
7U100-008 O-RING, -8 3
8M001-018 GASKET, 90MM THROTTLE BODY 1
7C011-050 10-32 PLUG SCREW 1
7U100-020 10-32 GASKET 1
8M001-017 HOLLEY 4-BARREL BASE GASKET 2
7P250-084 1/4 NPT X 1/2 X 90 BARB 1

8M110-069 ASSY, THROTTLE 69 351 MUSTANG 1

2A017-031 SPACER, THROTTLE ENCL. .313 ID 1
7C010-052 10-24 X 1/2 SS BHCS 6
7C010-077 10-24 X 3/4 SS BHCS 5
7C010-187 3/16 ROD END RH WITH NUT 1
7C010-188 3/16 ROD END LH WITH NUT 1
7C011-075 10-32 SCREW 1
7F010-001 NUT, THROTTLE 1
7F010-033 10-32 NUT 1
7J010-001 #10 FLAT WASHER 8
7J010-687 WASHER, THROTTLE 1
8M010-010 BRACKET, IDLE 1
8M010-040 THROTTLE ARM INNER 2
8M010-050 THROTTLE SHAFT 1
8M010-070 RETAINER, SPRING ENCL. 1
8M010-080 RETAINER, SPRING THROTTLE 1
8M010-090 SPRING, THROTTLE ENCL. 1
8M010-140 SHAFT, 5/16 HEX 1
7C010-251 .25 BALL, THROTTLE, 10-24 MT THRD 1
7F010-024 10-24 NYLOCK NUT 2
8M010-025 MORSE CABLE BRKT 1
8M010-180 BRKT, 69 MUSTANG THROTTLE 1

4PFX110-060 MTG PLATE ASSY, PASS, SIDE 69 351 1

4PFX010-050 PRIMARY MTG PLATE 1
4PFX010-060 S/C MTG PLATE 1
2A017-101-400 SPACER, SBF MTG PLATE 2
2A017-104-400 SPACER, 351 SBF MTG PLT 2
2A017-101-121 SPACER, FORD ALTERNATOR 1
7A375-500 3/8-16 X 5” HXHD GR8 3
7A375-575 3/8-16 X 5.75 HXHD GR8 PLT 2
7A375-126 3/8-16 X 1.25 HXHD GR8 PLT 6
7A437-550 7/16”-14 X 5-1/2” HXHD 1
7K375-040 3/8 AN960 FLAT WASHER, PLATED 11

4PFX130-351 OIL FEED LINE ASSY, SBF CARB 1

7P125-004 1/8 NPT 90° X -4 JIC FTG 1
7P250-034 1/4 NPT X 1/4 NPT STRT T 1
7P250-250 1/4” NPT STR X -4 JIC FTG 1
7U250-090-320 OIL FEED HOSE, 32” -4 X 90° 1
7U100-055 TIE WRAP, 6” NYLON 2

4PFX130-036 OIL DRAIN ASSY, SBF CARB 1

7P375-017 3/8 NPT X 1/2 BEADED HOSE BARB 1
7R001-008 #8 STNLS HOSE CLAMP 2
7U030-036 1/2” OIL DRAIN HOSE 1.5

4PFX112-031 AIR DISCHARGE ASSY, SBF CARB 1

4PFX012-031 MACH, DISCH TUBE SBF CARB 1
7PS350-200 SLEEVE, BLACK 3.5 I.D. X 2.0 LG 1
7PS350-275 REDUCER, BLK 3.5 - 2.75 1
7R002-044 #44 SAE TYPE F SS HOSE CLAMP 1
7R002-056 #56 SAE TYPE F SS HOSE CLAMP 3
7U030-046 5/32” VACUUM LINE 2
8H040-175 FILTER, 1-3/4" I.D. MFRB 1

8D204-010 RACE BYPASS VALVE - BLACK 1

4PFX101-001 FUEL ASSEMBLY, SBF CARB 1

7P125-016 1/8 NPT PLUG 1
7P250-043 1/4 NPT X 5/16” BARB 1
7P250-047 1/4 NPT TO 3/8” BARB 90° 1
7P250-141 -6 HOSE END, 90° 1
7P500-083 AN -8 HOSE END, STRAIGHT 1
7P500-084 MALE TEE -8, -6, -6 1
7P500-085 FITTING, -8 BULKHEAD WITH O-RING 1
7P500-086 120° -8 TO 1/2” BARB 1
7P500-087 PLUG, AN-8 O-RING PORT 1
7P500-089 FITTING, -8 BULKHEAD NUT, BLK 1
7P500-377 AN-8 MALE SHORT -6 MALE STD 1
7R001-006 #6 STNLS HOSE CLAMP 4
7U030-046 5/32” VACUUM LINE 4.5
7U032-016 3/8” EFI FUEL HOSE HI-PSR 2.5
7U100-008 O-RING, -8 3
8H040-020 FUEL FILTER, INLINE 3/8” 1
8F001-120 FUEL PUMP, SBF CARB 120 GPH, 6 PSI 1

4PFX020-010 INSTALLATION INSTRUCTIONS, SBF CARB 1

8H040-035 AIR FILTER, 3.5” FLG X 3.7L OFFSET 1

008575 S/C STRT INFO PKG ASSY PAXTON 1

8M110-100 HOLLEY 4150 FLOAT BOWL LINE ASSY 1

8M110-120 DEMON FLOAT BOWL LINE ASSY W/FTGS 1

ADDITIONAL PARTS NEEDED FOR COMPLETE INSTALLATION

1) HOLLEY 4150 OR DEMON STYLE MECHANICAL SECONDARY

CARBURETOR

vii

P/N: 4PFX020-010

©2004 Paxton Automotive Corp.

All Rights Reserved, Intl. Copr. Secured

28JUL04 v1.2(Univ.SBF Carb-4PFX v1.2)

1969 Mustang 351W Small Block

Ford, Driver Side Carbureted

Part No. 1001844

SUPERCHARGERS & FUEL SYSTEMS

PARTS LIST

IMPORTANT: Before beginning installation, verify that all parts are included in the kit. Report any shortages

or damaged parts immediately.

Part Number Description Quantity Part Number Description Quantity

1016123 S/C ASSY, NOVI 1200, CW, CRV 1969 1

2A038-370 S/C PULLEY Ø3.70 8-GROOVE 1
2A048-575 BELT, 57.5" 1

4PFX117-069 S/C DRIVE ASSY SBF, 69 351 1

4FA111-042 S/C BELT TENSIONER ASSY, H.O. 1
4PFX017-069 SPACER, SBF C/P, 69 351 1
4PFX018-021 CRANK PULLEY, SBF CARB 1
7A375-250 3/8-16 X GR8 HX 3
7K375-040 3/8 AN960 FLAT WASHER, PLATED 3

8PM205-012 CARB.ENCL ASSY, SBF CARB 1

8PM105-012 ENCL. MACH. ASSY, SBF 1
8PM003-051 CARB CVR, PAXTON 1
7P500-087 PLUG BTNHD, AN-8 WITH 0-RING, BLK 3
7A312-078 5/16-18 X 3/4 HOSE 16
7P187-102 FITTING, -3 TO 1/4 HOSE 3
7P187-103 PLUG, -3 BUTTONHEAD WITH O-RING 1
7P375-104 PLUG, OIL HOLE 3
7A312-252 5/16 STUD 4
7F312-024 6/16-24 JAM NUT 4
7J312-000 5/16 FLAT WASHER-SAE 4
7U100-003 O-RING, -3 4
7U100-008 O-RING, -8 3
8M001-018 GASKET, 90MM THROTTLE BODY 1
7C011-050 10-32 PLUG SCREW 1
7U100-020 10-32 GASKET 1
8M001-017 HOLLEY 4-BARREL BASE GASKET 2
7P250-084 1/4 NPT X 1/2 X 90 BARB 1

8M110-069 ASSY, THROTTLE 69 351 MUSTANG 1

2A017-031 SPACER, THROTTLE ENCL. .313 ID 1
7C010-052 10-24 X 1/2 SS BHCS 6
7C010-077 10-24 X 3/4 SS BHCS 5
7C010-187 3/16 ROD END RH WITH NUT 1
7C010-188 3/16 ROD END LH WITH NUT 1
7C011-075 10-32 SCREW 1
7F010-001 NUT, THROTTLE 1
7F010-033 10-32 NUT 1
7J010-001 #10 FLAT WASHER 8
7J010-687 WASHER, THROTTLE 1
8M010-010 BRACKET, IDLE 1
8M010-040 THROTTLE ARM INNER 2
8M010-050 THROTTLE SHAFT 1
8M010-070 RETAINER, SPRING ENCL. 1
8M010-080 RETAINER, SPRING THROTTLE 1
8M010-090 SPRING, THROTTLE ENCL. 1
8M010-140 SHAFT, 5/16 HEX 1
7C010-251 .25 BALL, THROTTLE, 10-24 MT THRD 1
7F010-024 10-24 NYLOCK NUT 2
8M010-025 MORSE CABLE BRKT 1
8M010-180 BRKT, 69 MUSTANG THROTTLE 1

4PFX110-050 MTG PLATE ASSY, DRIVER SIDE 69 351 1

4PFX010-050 PRIMARY MTG PLATE 1
4PFX010-060 S/C MTG PLATE 1
2A017-101-475 SPACER, SBF MTG PLATE DS 4
2A017-101-121 SPACER, FORD ALTERNATOR 1
7A375-650 3/8-16 X 6.5” HXHD GR8 2
7A375-575 3/8-16 X 5.75 HXHD GR8 PLT 2
7A375-126 3/8-16 X 1.25 HXHD GR8 PLT 6
7A437-650 7/16”-14 X 6.5” HXHD 1
7K375-040 3/8 AN960 FLAT WASHER, PLATED 10

4PFX130-026 OIL FEED LINE ASSY, SBF CARB 1

7P125-004 1/8 NPT 90° X -4 JIC FTG 1
7P250-034 1/4 NPT X 1/4 NPT STRT T 1
7P250-250 1/4” NPT STR X -4 JIC FTG 1
7U250-090-240 OIL FEED HOSE, 24” -4 X 90° 1
7U100-055 TIE WRAP, 6” NYLON 2

4PFX130-036 OIL DRAIN ASSY, SBF CARB 1
7P375-017 3/8 NPT X 1/2 BEADED HOSE BARB 1

7R001-008 #8 STNLS HOSE CLAMP 2
7U030-036 1/2” OIL DRAIN HOSE 1.5

4PFX112-031 AIR DISCHARGE ASSY, SBF CARB 1

4PFX012-031 MACH, DISCH TUBE SBF CARB 1
7PS350-200 SLEEVE, BLACK 3.5 I.D. X 2.0 LG 1
7PS350-275 REDUCER, BLK 3.5 - 2.75 1
7R002-044 #44 SAE TYPE F SS HOSE CLAMP 1
7R002-056 #56 SAE TYPE F SS HOSE CLAMP 3
7U030-046 5/32” VACUUM LINE 2
8H040-175 FILTER, 1-3/4" I.D. MFRB 1

8D204-010 RACE BYPASS VALVE - BLACK 1

4PFX101-001 FUEL ASSEMBLY, SBF CARB 1

7P125-016 1/8 NPT PLUG 1
7P250-043 1/4 NPT X 5/16” BARB 1
7P250-047 1/4 NPT TO 3/8” BARB 90° 1
7P250-141 -6 HOSE END, 90° 1
7P500-083 AN -8 HOSE END, STRAIGHT 1
7P500-084 MALE TEE -8, -6, -6 1
7P500-085 FITTING, -8 BULKHEAD WITH O-RING 1
7P500-086 120° -8 TO 1/2” BARB 1
7P500-087 PLUG, AN-8 O-RING PORT 1
7P500-089 FITTING, -8 BULKHEAD NUT, BLK 1
7P500-377 AN-8 MALE SHORT -6 MALE STD 1
7R001-006 #6 STNLS HOSE CLAMP 4
7U030-046 5/32” VACUUM LINE 4.5
7U032-016 3/8” EFI FUEL HOSE HI-PSR 2.5
7U100-008 O-RING, -8 3
8H040-020 FUEL FILTER, INLINE 3/8” 1
8F001-120 FUEL PUMP, SBF CARB 120 GPH, 6 PSI 1

4PFX020-010 INSTALLATION INSTRUCTIONS, SBF CARB 1

8H040-035 AIR FILTER, 3.5” FLG X 3.7L OFFSET 1

008575 S/C STRT INFO PKG ASSY PAXTON 1

8M110-100 HOLLEY 4150 FLOAT BOWL LINE ASSY 1

8M110-120 DEMON FLOAT BOWL LINE ASSY W/FTGS 1

ADDITIONAL PARTS NEEDED FOR COMPLETE INSTALLATION

1) HOLLEY 4150 OR DEMON STYLE MECHANICAL SECONDARY

CARBURETOR

P/N: 4PFX020-010
©2004 Paxton Automotive Corp.
All Rights Reserved, Intl. Copr. Secured
28JUL04 v1.2(Univ.SBF Carb-4PFX v1.2)

viii