Paxton Access 333110 Users Manual

Reader covers

Additional covers are available in black, white, grey, blue and silver. Registered installers can order these free of
charge by logging onto the secure installer extranet: https://extranet.paxton-access.co.uk/index.asp

If you are not a registered installer please call us on [phone] for more information.

Fitting

14/05/2007

Technical Support

Technical help is available: Monday - Friday from 5am - 5pm PST / 8am - 8pm EST

Other documentation on Net2 can be found on our web site - http://www.paxton-access.com/

1 800 672 PAXT [e-mail]

Suitability

Mounted on metal surface

Wet environments

Security sensitive doors

Readers mounted together

between readers

300mm

Quickstart guide

This supplement is a brief guide to installing a P series compact system. Advanced features such as card zoning are
not covered in this guide. For further information, a full installation manual is available on the website.

Ins-30003-US PROXIMITY P series compact reader

Exit

Exit button

(push to make)

Electric release

To 12V dc Power

supply

12V DC release current rating must be less than 1A.

Wiring

Screw connector wiring

Wire outputs

12v DC

0v

Lock 12V

Lock 0V

Exit 0V

Reset - Use 1 method, not both

1. Power down the unit

2. Press and hold the exit button

3. Power up the unit - wait for beep/red LED to go out

4. Release and press the exit button a further 2 times
(within 3 seconds)

5. The reader will beep 6 times
OR

1. Present Enrolment card

2. Present Door open time card twice

3. Present Enrolment card

4. Present Door open time card twice

5. WAIT FOR 5 SECONDS!