Paxton Marine exit button User Manual

15/03/2010

Ins-30061 Marine exit button

Technical Support

01273 811011 [e-mail]

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Paxton

Suitability

With Net2 and Switch2 ACU’s

With compact systems

Mounted on metal surface

Wet environments

Fitting

Fix the backplate to the wall with the stainless steel screws provided in the tting kit. The small slot in the plate edge should

be positioned at the bottom.

Where the unit is to be tted to a smooth surface, bulkhead, etc. a gasket is supplied to provide a weatherproof seal
between the backplate and the mounting surface. (The unit has its own integral seal)

Locate the unit in the keyhole slots provided in the backplate. Make sure that the locking pin is close to the slot in the edge
of the backplate. Rotate the unit clockwise until the locking pin engages in the slot.

To remove the unit, insert a small screwdriver into the cut out provided and use it to lift the locking pin. The unit can then

be rotated anticlockwise to release it from the backplate.

Wiring

This unit uses solid state electronics to switch 0V to the Exit 0V output and therefore cannot be

EXIT

12V DC

power supply

0V

+12V DC

0V

Green LED

Exit 0V

used with circuits that require voltage free contacts.

Wiring to a Compact reader

The green LED on the exit button is

illuminated but will not ash when used

with compact readers.

+12V

Environment

Operating temperature

Outdoor Use

Cable length

Electrical

Voltage

Current

Dimensions

Specications

Min

-25 °C

Min

8V DC 14V DC

Diameter

106 mm 16 mm

+12V

0V

Electric release

Max

+55 °C

No

5 metres

Max

220 mA

Depth

THIS UNIT IS FOR INTERNAL USE ONLY.

This Exit button unit is designed to complement the PROXIMITY Marine reader. It has no moving parts and is
waterproof to IPX7.

The use of capacitive sensing to determine the presence of a user’s nger does, however, make it unsuitable for

external use. The reason for this is that heavy rainfall / snow / etc. could activate the exit button in error.

The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596