Paxton PROXIMITY P38, PROXIMITY P series, PROXIMITY P50, Ins-30003, PROXIMITY P75 Quick Start Manual

24/11/2011

Technical Support

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011 [e-mail]

Suitability

Mounted on metal surface

Wet environments

Security-sensitive doors

Readers mounted together

between readers

300 mm

Quickstart guide

This supplement is a brief guide to installing a P series compact system. Further information is available for
download at: http://www.paxton.co.uk/ or call the communications team on: 01273 811011.

Ins-30003 PROXIMITY P series compact reader

Exit button

(push to make)

Electric release

12V DC power

supply

12V DC release current rating must be less than 1A.

P75 Screw connector option

The unit should be mounted in conjunction with
an electrical backbox to achieve the required
clearance for the connector.

If an adaptor plate (310-750) is tted, the

mountings on the backbox can also be used.

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

+12V

+12V

0V

0V

0V

Exit

Paxton

Indoor use only

+12V DC

0V

Lock 12V

Lock 0V

Exit input

Exit 0V

Enrolment Card - must be presented when the system is rst powered on

BEEP!

BEEP!

2 3 4

1. At installation, present this card to the
reader to validate the tokens in this pack

2. To re-validate a user token present this
enrolment card to the reader followed

by the

user token

Paxton Access

FUNCTION CARD

enrolment card

More info: http://paxton.info/74

1. At installation, present this card to the
reader to validate the tokens in this pack

2. To re-validate a user token present this
enrolment card to the reader followed

by the

user token

Paxton Access

FUNCTION CARD

enrolment card

More info: http://paxton.info/74

1

1.At installation, present this card to the
reader to validate the tokens in this pack

2.To re-validate a user token present this
enrolmentcard to the reader followed by the
user token

FUNCTION CARD

enrolment card

1.A

t installati

on, present this card to the

reader to v

alidate the to

k

ens in this pack

2.To re-validate a user tok

en present this

enrolment card to the reader followed b

y the

user token

FUNCTION CARD

enrolment card

More info: http://paxton.info/74

1. Take the enrolment card from the new pack of user cards.

2. Present the enrolment card to the reader.

3. The reader beeps and the LED's light up as the enrolment card is acknowledged.

4. All cards in the pack are now valid. The enrolment card can now be returned to it's pack.

Reset - Use one method

Reader covers

Additional covers are available in black, white, grey, blue and silver. Registered installers can order these free

of charge by logging onto the secure installer extranet: http://paxton.info/1035 or if you are not a registered
installer please call us on: 01273 811011 for more information.

Fitting

Wiring

1. Power down the unit.

2. Press and hold the exit button.

3. Power up the unit. It will give several quick beeps.

4. Wait for a further beep and then release and press
the exit button twice more.

5. The reader will beep 3 times to conrm the reset.

OR

1. Present Enrolment card.

2. Present Door open time card twice.

3. Present Enrolment card.

4. Present Door open time card twice.

5. WAIT FOR 5 SECONDS!