Paxton Hands free read range tester User Manual

Ins-30094 Hands free read range tester

25/03/2010

Technical Support

Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)

Saturday from 09:00 - 13:00 (GMT)

01273 811011 [e-mail]

Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/

Hold the card at the
test distance from
the reader, press &
hold the button.

The lights will flash once to
indicate, battery condition & start of test.
Continue to hold the button, the lights will
display the read range condition. Perform
this test 3 times to confirm the field.

OK

Read Range Tester

Technical Support:
[phone]
[e-mail]

To replace the battery, remove the screw,
insert a flat blade tool into the slot & twist
to release the casing. To close engage the
two clips & press together firmly.
Replace the screw.

The test card is used to determine the range of the 125 kHz P series reader and its ability to transmit
data to a hands free token. This will determine the range of the hands free system as the token must

rst receive the interface address before sending its own token number to the interface itself.

If the tester shows a Green indication conrming receipt of the reader data but the hands free system

is still unreliable, then the interface will need to be relocated to a better position.

The above label is attached to the test card itself.
Please contact Technical Support or see the website if you require any further assistance.

AN1082 - Hands free - How does it work? < http://paxton.info/815 >
AN1091 - How to achieve the best read range with hands free equipment < http://paxton.info/867 >

Paxton