PAX Technology PX7BW User Manual
PAX TECHNOLOGY INC.
Product Description
Product Description
Stylus pen
Touch screen
Magnetic
stripe reader
Contactless
reader
Privacy shield
Keypad
Smart card
reader
Cable retention clips
Communication
ports
Speakers
MAC address label
Regulatory label
Part number/
serial number label
Communication
module
Communication ports are labeled and color-coded:
Power Connections
Power Connections
3
PAX TECHNOLOGY INC.
PAX TECHNOLOGY INC.
Reset Button and Audio Jack
Reset Button and Audio Jack
7
If required, restart the terminal
by pressing in and holding the
reset button for 2-3 seconds.
If required, a visually disabled
person can connect a headphone
to the terminal for audio prompting using the 3.5mm output
audio jack.
Cable Lock
Cable Lock
8
If required, insert customer-provided
cable lock into K-Slot®. Loop cable
around permanent object to secure
in place.
Reset
Button
Stylus Port
Audio Jack
Stand Installation
Stand Installation
9
If required, the P terminal may be
mounted to a stand. Instructions
may vary depending on stand
specifications.
Carefully route the required cables
up through the stand pipe and out
the top. Connect the cables to the
x
Pterminal ports.
Insert the three mounting slots on
the underside of the terminal into
the three metal prongs on the stand
base.
Slide the terminal firmly into position,
locking the terminal in place on the
stand. Secure with fastening screw
or locking device as required.
x
Route Cables
Mounting
Slots
Green Blue Black Yellow Red White
PAX TECHNOLOGY INC.
Cleaning the Device
Cleaning the Device
10
Power Supply
200310110000070
Requires Power Cord
Stylus Pen
200209090000929
Power Cord
200311020000023
Requires Power Supply
Stylus Holder Plug
200209090000930
Privacy Shield
200209060000040
Decorative Privacy
Shield Plug
2002090900001037
Loading...