PAX Technology IM30 UM

P/N: 200312000000437

PAX TECHNOLOGY LIMITED reserves
the right to change product specifications
without

Manufacturer: PAX Computer Technology (Shenzhen) Co., Ltd.
Address: 4FL, Building #3, Software Park, 2nd Central Science­Tech RD, High-Tech Industrial Park, Shenzhen, Guangdong, PRC
T: 0755-86169630 F: 0755-86169634
W: http://www.pax.com.cn

Responsible Party: PAX Technology Inc.
Address: 8880 Freedom Crossing Trail, Building 400, 3rd Floor,

Suite 300, Jacksonville, Florida 32256
T: 1-877-859-0099

prior notification.

Compliance Statements

FCC COMPLIANCE STATEMENT

This

device complies with Part 15

peration is

O

this device may not cause harmful interference, and

1)

this device must accept any interference received,

2)

including interference that may cause undesired
operation.

Warning

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.

This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accorda
interference to radio communications.

However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:

subject

nce with the instructions, may cause harmful

to

he fol

t

lowing

of t

conditions:

two

he F

CC Rules.

relocate

Reorient

•

Increase the separation between the equipment and

•

receiver.
Connect the equipment into an outlet on a circuit

•

different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV

•

technician for help.

Caution

Any changes or modifications not expressly approved by
the manufacturer could void the user's authority to
operate this equipment.

Radiation Exposure

This device complies with FCC radiation exposure limits
for general environments.

INDUSTRY CANADA STATEMENT

This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science
and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two
conditions:

1)

this device may not cause interference, and
t

2)

interference that may cause undesired operation of
t

or

his device must accept any interference, including

he device.

the

receiving antenna.

Cet appareil contient des émetteurs / récepteurs
exemptés de licence conformes aux RSS (RSS)
d'Innovation, Sciences et Développement économique
Canada. Le fonctionnement est soumis aux deux
conditions suivantes :

l'appareil ne doit pas produire de brouillage, et

1)

l'utilisateur de l'appareil doit accepter tout brouillage

2)

radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.

This device and its antenna(s) must not be co-located or
operating in conjunction with any other
transmitter, except tested built-in radios.

Cet appareil et son antenne ne doivent pas être situés ou
fonctionner en conjonction avec une autre antenne ou un
autre émetteur, exception faites des radios intégrées qui
ont été testées.

The Country Code Selection feature is disabled for
products marketed in the US/Canada.

La fonction de sélection de l’indicatif du pays est
désactivée pour les produits commercialisés aux
Unis et au Canada.

Radiation Exposure Statement

This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator & your
body.

antenna or

États-

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition
aux rayonnements IC établies pour un environnement
non contrôlé. Cet équipement doit être
avec un minimum de 20 cm de distance entre la source
de rayonnement et votre corps.

installé et utilisé

Index of Icons

7

do not throw away, requires professional recycling

Class II equipment

for indoor use only

VI energy efficiency marking (level VI)

AC voltage

~

DC voltage

Quick Setup Guide

IM30

POS TERMINAL

7

8 9

10

Contents

The following items are included with your POS
terminal. If any items are missing, contact your dealer.

Name Quantity
IM30 POS terminal 1
IM30 mounting bracket 1
M4 nuts 4

M4 screws 4

IM30 Quick Setup Guide 1

Product Description

2

LCD touchscreen

1.

2. front facing camera

magnetic strip card reader

3.

4.

smart card reader

code scanning camera

.

5

camera locator light

6.

status indicator

7.

8.

contactless card interface

Figure 1:

8

1

4

Fron

t vi

ew

3

7

5

6

1 2

7

8

2

1

4
3

5

6

1.

RS232-A (device)

2.

RS232-B (

3.

auxiliary j

4.

Ethernet port

5.

digitial I/O

6.

Executive/MDB port

7.

3G/4G a

Figure 2: Back view

host)

ack (mic + speaker)

ntenna (optional)

SAM card module

8.

USB Type A port (host)

.

9

USB Type C port (OTG)

10.

service button

11.

reset button

12.

HDMI port

13.

MDB port

14.

allation

Inst

1)

SAM and SIM Cards

2)

Clearance Holes and Dimensions

105.00

31.50

56.67

82.00

2)

Environmental Conditions

S

torage Temperature:

Working Temperature:

Relative Humidity:

-30°C~70°C

-

20°C~70°C (-4F~158°F)

5%~

(-22°F~158°F)

95% (no condensation)

Maintenance and Usage

9

10

11

12

13

14

Front

Left

Right

Figure 4: SAM card mounts (main body)

3)

Figure 5: SAM and SIM card mounts (SAM module)

146.00

Figure 6: device dimensions (mm)

Recommended Device Installation

IM30

Unscrew the SAM card module and then remove it by
prying at the notch set to its side. On the main body of

Top

the IM30, there are 2 micro-SIM sized SAM card slots.
Open the mount and insert the card into the slot with
the clipped corner of the card to the upper right, then

Figure 7

Instructions

: installation and mounting

lock the mount with the card inside.

The SAM card module comes in 3 configurations, the

Switching the device on and off

1)

Switch on:

Switch off:

Link the IM30 to a power source via the
MDB, Executive, or RS232-A ports.

Disconnect the IM30 from the power
terminal it is connected to.

5 6

Back

Figure 3: View from all sides

3

Bottom

first has no functional card slots, the second has a
mini-SIM sized SIM card slot located to the left, and
the last has an additional 2 mini-SIM sized SAM card
slots to the right of the SIM card slot. Install the cards
with the clipped corner facing inwards and to the right.

4

107.00

M4 nuts

M4

screws

mounting bracket

5

If any cables become damaged, seek a replacement.

1)
Do not insert unknown materials

2)
the IM30, this may cause serious damage to the device.

If repairs are required, please contact a professional

3)
technician instea

4)

The IM30 contains tamper-proofing features; these

d of attempting them on your own.

circuits will trigger if the device is disassembled, at
which point it will have to be rearmed before the
device is ready to resume operation.

The IM30 is designed for outdoor use; however, during

5)
normal use its surface should still be keep clear of dirt
and possible liquid contaminants.

6)

While the IM30 is designed to resist ingress of dust and
liquids, it is not designed to resist pressurized liquids
such as water hoses. Keep the back of the device away
from dust and liquids as much as possible.

7)

Make sure the various cables connect t
appropriate voltages at the proper pins.

into any port on

o provi

de the