PAX Technology D2204GBW User Manual

D220 Wireless POS Terminal

1. Installation

Micro SAM/SIM Card：

a) Remove the bottom cover.
b) Insert the Micro SAM/SIM card to the corresponding card slot.

2. Instructions

1) Power ON/OFF

Power on: Plug in power adapter, Press Power ON/OFF button for 5 seconds, and then PAX
LOGO will display on LCD.
Power off: Press Power ON/OFF button for 3 seconds until Shutting down... can be seen.
Forced shutdown：Press Power ON/OFF button more than 6 seconds，until the screen no
display, that is forced to shut down.

2) IC Card

Put IC card chip side upward, push-in IC card slot and to bottom.

3) Contac tless C ard

The card read area is above the LCD, Put the card above the LCD.

4) Battery Charge display

Connecting USB port with external adapter can charger battery. And there are charging
display.

5) Battery Charge style
Please use the original adapter instead of pc usb port if you need to charge.

3. Installation and Usage Tips

1）Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment.
2）Forbid non-professional to repair the terminal.
3）Before insert the card, please check internal and around of IC card slot. when you found some

suspicious objects , must report to related administrator.

4. Lithium Ion Battery Usage Tips

1) In order to prolong the battery life, the terminal needs to charge at least once in 3 months..

2) Avoid putting the battery in sunlight or smoke, dusty environment.

3) Forbid crushing, treading ,throwing the battery into fire or liquid.

4) Replace the battery immediately if it is damaged(exothermic or distorted).

5) It is recommended changing battery that used more than two years.

5. Specifications

1) CPU 32-bit, ARM Cortex-A9, 1.25 GHz

2) Memory 512MB FLASH, 512MB SDRAM

3) Display 4" TFT, 480 x 800 pixels

4) Keypad Enter, Cancel, Clear (Touch key)

5) 0~9 (Virtual key)

6) Magnetic Card Reader Track 1 / 2 / 3, bi-directional

7) IC Card Reader EMV4.3 L1 & L2 certified

8) SAM Slots 1 Micro SAM Slot, ISO7816

9) Communication 4G / 3G / Bluetooth + WiFi

10) Ports 1Micro USB

11) Battery Li-ion 3050mAh

12) Power Supply Input: 110~240V AC, 50/60Hz

13)

14) Working Environment Temperature: 0°C to 50°C (32°F to 122°F)

15)

16) Storage Environment Temperature: -20°C to 70°C (-4°F to 158°F)

17)

18) Dimensions 136.5mm x 70mm x 17.4mm (L x W x H)

19) Weight 182g with battery

20) Wireless Module：

21) Operating Frequency Band (RF):

22) LTE (FDD) B2/B4/B5/B17, all bands with diversity

23) HSDPA/HSPA+/HSUPA/WCDMA B2/B4/B5

24) Type of Modulation：LTE (FDD)

Output: 5V DC, 2A

R.H. : 10﹪~90﹪( non-condense)

R.H. : 5﹪~95﹪( non-condense)

FCC notice

The following statement applies to all products that bear the FCC logo
and/or FCCID on the product label.

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiated radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

-Reorient or relocate the receiving antenna.