PAX Technology D210WCDMA User Manual

Wireless POS Terminal

D210

PAX TECHNOLOGY LIMITED

1. Installation

1） SAM Card Installation
① Open up battery cover, which is at the bottom of the terminal;
② Take out battery;
③ Insert SAM card to corresponding SAM card slot.
2） Battery Installation
① Hold the battery with its facing up;
② Attach battery forelock to battery bayonet;
③ Press down the other side of the battery

2. Instruction

1） Power ON/OFF
Power on: Insert power adapter or insert the battery, Press button for 3 seconds until LCD

backlight is on. If POS terminal is being turned on successfully, PAX LOGO can be seen and
‘Di’ from the buzzer can be heard.
Power off: Press button for 3 seconds until Shutting down… can be seen. POS terminal is
being turned off.
2） Magnetic Stripe Card
When user swipes magnetic stripe card along the slot, the backside of card, which contains
magnetic strip information, should be facing to the terminal. Bi-directional swiping is supported. It
is recommended to swipe starting from the top of the terminal to the bottom of the terminal with a
constant moving speed.
3） IC card
When user insert IC card into the IC slot, the chip of IC card should be facing up; user is
recommended to gently insert the card, in order to avoid any physical damage to the card or the IC
slot of the terminal. If IC card is successfully read by the terminal, the IC card icon will be shown
on LCD display screen.
4） Tearing off receipt from the terminal
After the receipt is printed, pinch the end of the receipt and keep an angle of 45 degrees between
receipt and the cutter of the terminal; tear off the receipt swiftly.

3. Specifications
Default

CPU： 32-bit，ARM11
Memory：64MB DDR , 128MB Flash, Micro SD(Maximum 32GB)
Display：2.8 -inch 320x240 pixel color TFT LCD；LED backlight；
Keypad：10 alphanumeric keys, 8 functional keys
Magnetic Card Reader ：Track 1/2/3，bi-directional swipe
IC Card Reader：1 user card （EMV2000）
Contactless Reader: 1 Contactless Reader(ISO/IEC 14443 Type A/B)
SAM slots：SAM slot 2 or SAM slot 1
Communication： Bluetooth, WIFI, WCDMA
Peripheral Ports: 1 Mini USB Interface (RS232), 1 Mini USB Interface(USB HOST),1 Power
Interface
1 Multi-Functional port(High-Speed RS232+Power charge port)
Printer : Thermal printer; Speed:18 lines/sec; Paper width:58mm