Paul Mitchell Express Ion Dry+ D15NA Instructions, Safety And Warranty Manual

INSTRUCTIONS, SAFETY AND WARRANTY GUIDE
Congratulations on the purchase of your Express Ion Dry®+ blow-dryer. We hope you enjoy it for years to come!
• Please make sure to read this guide thoroughly before use.
• Please keep this guide in a handy place for quick reference.
and quickly from the inside out, leaving hair hydrated, conditioned,
and frizz-free. Easy styling– Smoothes and seals the cuticle, while gentle air ow
results in less tangles, yaways, and damage.
FEATURES
• Digital display shows heat and speed settings
• Easy-snap lter
• 5 temperatures/5 speed settings
• 1875 watts professional DC motor
• Ergonomic handle
• Express Ion Complex™ helps hydrate and restore moisture
• Cool shot button
• Ionic styling nozzle and diffuser
• 9-foot professional cord with hanging loop
OPERATING INSTRUCTIONS
This dryer is intended for professional and consumer use. This dryer has a polarized plug (one blade is wider than the other). As a safety
feature, this plug will t into a polarized outlet only one way. If the plug does not t securely, reverse the plug. If it still does not t, contact a qualied electrician. Do not attempt to defeat this safety feature.
GENERAL SPECIFICATIONS
Model: D15NA Rated Voltage: 125V Frequency (Hz): 60Hz Rated Wattage: 1875W Length of A.C. Cord: 9 ft./2.7 m Weight: 20 oz. (1.25 lbs.)/570 g Accessory: Nozzle and diffuser
MAINTENANCE
The dryer is virtually maintenance-free. No lubrication is needed.
Unplug the dryer from the power source prior to any maintenance.
Keep all vents and openings clear of dirt and dust. The exterior of the dryer should be wiped clean with a damp cloth only. The air lter cover, at the rear of the dryer, should be removed and the area cleaned of any hair or dust. There is an air lter underneath the air lter cover that should also be washed and cleaned every couple of weeks so hair doesn’t catch in the fan. To keep the dryer clean, unplug the dryer from the power source, remove the mesh lter, and wash the mesh lter with soap and water every 30 days.
OVERHEATING
If overheating occurs, an automatic safety device will trip off and the
cool air will come out of the dryer for a period of time. Then the hot
air will come out again after the automatic safety device resets itself. If this occurs, unplug the cord and allow the dryer to cool for 10 to 15 minutes. Make sure the air vents and removable mesh lter are fully cleaned before starting again. For easy cleaning, simply twist the lter cap open to remove the mesh lter, and wash with soap and warm water. Let the mesh lter dry completely before inserting it back into position, then twist the lter cap to the lock position.
Defects and Malfunction
Read all contents of the warranty completely and carefully before contacting the salon, the distributor, or our Paul Mitchell® Pro Tools™ Warranty Center.
• The dryer is covered under warranty for 12 months from the date
of purchase.
• John Paul Mitchell Systems® is not responsible for damage
caused by misuse or due to operator accidents, such as dropping the appliance on the oor.
IMPORTANT
SAFETY INSTRUCTIONS
When using electric appliances, especially when children are present, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS
BEFORE USING.
KEEP AWAY FROM WATER.
DANGER – As with most electric appliances,
electrical parts are electrically live even when switch
is off.
To reduce the risk of death by electric shock:
1. Always “unplug it” immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or other liquid.
5. If an appliance falls into water, “unplug it” immediately. Do
not reach into the water.
WARNING – To reduce the risk of burns,
electrocution, re or injury to persons:
Use the dryer only for the purpose described in this guide to prevent accidents, misuse, damage, or malfunction.
Use this appliance only for its intended use as described
in this manual.
• This appliance should never be left unattended when
plugged in.
• Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain
disabilities.
Do not use attachment not recommended by the manufacturer.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly or it has been dropped,
damaged, or dropped into water. Return the appliance to
a service center for examination and repair.
• Plug the dryer into an electrical outlet of AC 125V/60Hz.
• KEEP AWAY FROM WATER to prevent re, electric shock,
damage, or malfunction.
• KEEP AWAY FROM CHILDREN.
Do not handle the dryer or cord with wet hands, as this may cause electric shock, personal injury and/or property
damage.
Keep the cord away from heated surfaces.
• DO NOT WRAP THE CORD AROUND THE DRYER. Allow
the cord to hang loose and straight at the point of entry into the dryer.
• Never drop or insert objects into any of the dryer openings.
Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being administered.
• DO NOT USE WHEN CORD HAS BEEN DAMAGED OR IF PLUG IS LOOSE.
Loading...
+ 2 hidden pages