Page 1
SL4050/B12/E
SmartLink Series 12-Line VoIP SIP Phone
SL4050/B2/E
SmartLink Series 2-Line VoIP SIP Phone
Quick Start Guide
0
Approval
The Model SL4050 phones are not approved for, and are not intended for, connection to the Public Switched
Telephone Network (PSTN).
Part Number:
Revised:
07MSL4050-QS, Rev. D
August 12, 2008
Sales Office:
Technical Support:
E-mail:
WWW:
+1 (301) 975-1000
+1 (301) 975-1007
support@patton.com
www.patton.com
Page 2
WARNING
•
The SmartLink SIP Phone contains no user serviceable parts.
The equipment shall be returned to Patton Electronics for
repairs, or repaired by qualified service personnel
• Mains Voltage: Do not open the case when the power cord is
attached. The mains outlet that is utilized to power the SmartLink SIP
Phone shall be within 10 feet (3 meters) of the device, shall be easily
accessible, and protected by a circuit breaker.
• Do not work on the system or connect or disconnect cables during
periods of lightning activity.
• Ultimate disposal of this equipment must be handled according to all
applicable national laws and regulations.
.
2
SmartLink 4050 Series Quick Start Guide
Page 3
1.0 Before you begin
The VoIP SIP phone can be set up using the keypad and a web browser, such as Internet Explorer. If you purchased this product to make a VoIP call, you must have either an Ethernet-based Cable or a DSL modem with an
active connection to the Internet.
1.1 Check your package contents
The following items are included in the SmartLink 4050/B12 and SmartLink 4050/B2 packaging. Contact your
supplier immediately if an item is missing.
SmartLink 4050/B12 VoIP SIP Phone SmartLink 4050/B2 VoIP SIP Phone
Ethernet cable, 5-foot (1.5-meter), Qty: 1
\
Power Adaptor
SmartLink documentation CD-ROM
Wall/Desk mounting plate
SmartLink 4050 Series Quick Start Guide
3
Page 4
1.2 Overview of the SL4050/B12/E key functions
Voice Message
Down
Cancel/Left
Phone Book
Numeric Keypad
Phone Book
2
1
ABC3DEF
4
5
GHI
JKL
7
8
TUV
PQRS
0
.
@
*
OKCancel
Menu
Mute/Func
Transfer
6
MNO
Redial
9
WXYZ
Hold
#
2x16 Characters LED Display
LED Indicator
M1
M2
M3
M4
M5
M6
M7
M8
M9
M10
M11
M12
SPEAKER
Up
3-Way Conference
OK/Right
Menu
Local Multi-Line
Mute/Function
Transfer
Redial/Call History
Hold
Speaker Phone
Item Description
2 x 16 LCD Display Displays menu, time, clock, name, phone number, call status
LED Indicator Indicates that phone is currently in use or ringing
Up Cycle through the phone menu, adjust volume
3-Way Conference Enable 3-way conference
OK/Right Confirm setting change, exit menu, dial, save changes
Menu Access the phone menu
Mute/Function Disable user's microphone so that the person on the other line can not hear anything,
access the language selection, access the time format
Transfer Transfer the person you are currently having a conversation to another line
Redial/Call History Redial last dialed number, access redial menu
Hold Place the person on the other line on hold, answer call waiting
Speaker Phone Enable user to use the phone without using the handset
Voice Message Check voice message
Down Cycle through the phone menu, adjust volume
Cancel/Left Deny changes, cancel phone calls, ignore phone calls, backspace
Phone Book Access the phonebook
Numeric Keypad Input IP/phone number/alphabet characters
Local Multiline Switch to different lines
4
SmartLink 4050 Series Quick Start Guide
Page 5
1.3 Overview of the SL4050/B2/E key functions
Voice Message
Down
Cancel/Left
Phone Book
Phone Book
OKCancel
Menu
2x16 Characters LED Display
LED Indicator
Up
3-Way Conference
OK/Right
Menu
Numeric Keypad
Item
WXYZ
Mute/Func
3
DEF
Transfer
6
MNO
Redial
9
Hold
#
2
1
ABC
4
5
GHI
JKL
7
8
TUV
PQRS
0
.
@
*
Speaker
Description
Mute/Function
Transfer
Redial/Call History
Hold
Speaker Phone
2 x 16 LCD Display Displays menu, time, clock, name, phone number, call status
LED Indicator Indicates that phone is currently in use or ringing
Up Cycle through the phone menu, adjust volume
3-Way Conference Enable 3-way conference
OK/Right Confirm setting change, exit menu, dial, save changes
Menu Access the phone menu
Mute/Function Disable user's microphone so that the person on the other line can not hear anything,
access the language selection, access the time format
Transfer Transfer the person you are currently having a conversation to another line
Redial/Call History Redial last dialed number, access redial menu
Hold Place the person on the other line on hold, answer call waiting
Speaker Phone Enable user to use the phone without using the handset
Voice Message Check voice message
Down Cycle through the phone menu, adjust volume
Cancel/Left Deny changes, cancel phone calls, ignore phone calls, backspace
Phone Book Access the phonebook
SmartLink 4050 Series Quick Start Guide
5
Page 6
1.4 Numeric Keypad Definitions
You can use alphanumeric characters to enter details into the Phone Book, to create text and e-mail messages.
The table below shows the characters that you can enter in the different text modes.
Key
1
2
ABC
3
DEF
4
GHI
5
JKL
Text Mode
Key
Normal (ABC) Numeric (0-9) Normal (ABC) Numeric (0-9)
1 pqrsPQRS 7
abcABC 2 tuvTUV 8
defDEF 3 wxyzWXYZ 9
ghiGHI 4 @ . _ * # ()
jklJKL 5 . *
7
PQRS
8
TUV
9
WXYZ
0
@
% & + / $ ,
.
Text Mode
0
*
6
MNO
mnoMNO 6 #
#
6
SmartLink 4050 Series Quick Start Guide
Page 7
2.0 Installing the VoIP SIP phone
The interconnecting cables shall be acceptable for external use and shall be rated for
the proper application with respect to voltage, current, anticipated temperature, flammability, and mechanical serviceability.
CAUTION
Plug one end of the Ethernet cable included with the VoIP SIP phone into the WAN port on the SIP phone
1
(see
figure 1
cable into the xDSL modem or cable modem (or into an optional router or hub).
WARNING
for SL4050/B12/E or
figure 2
on page 8 for SL4050/B2/E). Plug the other end of the
Do not work on the system or connect or disconnect cables during periods
of lightning activity.
Power adapter
Ethernet Cable (included with
SL 4050/10 phone)
Router/Hub
Internet or
optional WAN
(optional)
DC IN 5V
Figure 1.
WAN LAN
SmartLink 4050/10 VoIP SIP Phone
3
2
Ethernet Cable (optional)
PC (optional)
Power Cable LAN RX TX
Cable/xDSL
modem
1
Connecting the SL4050/B12/E SIP Phone
SmartLink 4050 Series Quick Start Guide
7
Page 8
If you will not be connecting a PC to the phone, go to step 3. Otherwise, connect an Ethernet cable into
2
3
the LAN port of the SIP phone (see
figure 1
on page 7 for SL4050/B12/E or
figure 2
for SL4050/B2/
E). Plug the other end of the cable into the Ethernet port on the PC.
SmartLink 4050/B2 VoIP SIP Phone
Ethernet Cable (optional)
PC (optional)
Figure 2.
LAN WAN
DC IN 5V
Power adapter
12
Ethernet Cable (included with
SL 4050/2 phone)
X
XT
R
N
A
L
e
l
b
a
C
r
e
w
o
P
Cable/xDSL
modem
Connecting the SL4050/B2/E SIP Phone
3
Router/Hub
(optional)
Internet or
optional WAN
Plug the power adapter barrel connector into the power connector on th SIP phone (see
page 7 for SL4050/B12/E or
figure 2
for SL4050/B2/E). Plug the other end of the power adapter into
an AC electrical outlet.
8
SmartLink 4050 Series Quick Start Guide
figure 1
on
Page 9
3.0 Setting up the VoIP SIP phone
Press the MENU key
Display Name:
Your name
ADSL DIALUP:
ENABLE
ADSL ID:
My_ADSL_ID
ADSL Password:
********
IP Address:
AUTO
Subnet Mask:
AUTO
Router IP:
AUTO
ADSL DIALUP:
ENABLE/DISABLE
DHCP:
ENABLE/DISABLE
DisableEnable
ADSL DIALUP:
DISABLE
DisableEnable
IP Address:
010.000.000.100
Subnet Mask:
255.255.255.000
Router IP:
010.000.000.254
SmartLink 4050 Series Quick Start Guide
DNS Server IP:
010.000.000.001
SNTP Server IP:
220.130.158.52
Figure 3.
Menu summary, page 1 of 2
ENABLE/DISABLE – select
enable or disable
A
UTO – IP address given by
the router or ISP
SNTP Server IP – IP or URL
9
Page 10
SNTP Cycle:
01
Do Not Disturb:
ENABLE/DISABLE
CF Unconditional:
ENABLE/DISABLE
CF User Busy:
ENABLE/DISABLE
CF No Answer:
ENABLE/DISABLE
Anonymous Call:
ENABLE/DISABLE
Anony Call Rej:
ENABLE/DISABLE
Ringing Type:
Ringing 1~4/5~8/9
WAN MAC Address:
00D0E9123456
M2 Setting:
Line
LAN MAC Address:
00D0E9123457
Press the MENU key
Version:
V: 01.31
Ringing 1~9
1~4: Tone
5~8: Melody
9: MP3
M2 ~ M12
Type: Line/Park
One Touch Dial/
Extension
UPDATE CHANGES?
<OK> OR <CANCEL>
SL4050/B12
Model Only
10
Figure 4.
Menu summary, page 2 of 2
SmartLink 4050 Series Quick Start Guide
Page 11
4.0 Logging in to the web interface
The configuration menu can be accessed using a web browser.
1.
Open a web browser (Internet Explorer, Netscape Navigator, or equivalent).
2.
Type in the IP address of the phone followed by:
Note
The IP address is provided by your Internet service provider (ISP). If your ISP supports DHCP, you can
obtain the IP address from your phone.
Mute/Func
Press + to get the IP address. You can also login from the LAN port with
192.168.15.1:9999
9
4
WXYZ
GHI
.
9999
(for example
http://192.168.1.1:9999
http://
).
The login window displays (see
3.
Enter a
User Name
and
figure 5
Password
).
Figure 5.
. Leave the user name and password blank if you are installing the
phone for the first time.
4.
Click OK. The following screen displays after logging in:
Login window
SmartLink 4050 Series Quick Start Guide
Figure 6.
Main window
11
Page 12
4.1 Network Settings - DHCP
Click on Dynamic host configuration protocol (DHCP) for IP address information that is obtained automatically
from your ISP. The
DNS Server
information is obtained from your ISP.
Figure 7.
4.2 Network Settings - PPPoE
Select
PPPoE
if your ISP uses PPPoE. Most DSL users use PPPoE.
DHCP configuration window
•
PPPoE ID:
•
PPPoE Password:
DNS Server 1-2:
•
12
PPPoE ID/username provided by your ISP
Password for the PPPoE ID
DNS address provided by your ISP
Figure 8.
PPPoE configuration window
SmartLink 4050 Series Quick Start Guide
Page 13
4.3 Network Settings - Static IP
Select
Static IP
if all Wide Area Network IP information is provided to you by your ISP.
Figure 9.
•
IP Address: IP address assigned to you by your ISP
•
Router IP: Router IP address
•
Subnet Mask: Subnet mask
•
DNS Server 1-2: DNS server address provided by your ISP
Note
RESTART
the system for new settings to take effect after you modify the IP address.
Static IP configuration window
SmartLink 4050 Series Quick Start Guide
13
Page 14
4.4 SIP Settings
Click on
SIP Settings to display the configuration window (see
figure 10
). Session initiation protocol (SIP) is
the most popular VoIP standard. It enables two or more people to make phone calls, share multimedia, and
make multimedia conference over the Internet.
Note
You should have an administrator set up these settings for you or obtain the information directly from
your SIP service provider.
•
SIP Phone Port Number:
Figure 10.
SIP phone listening port
SIP Settings window
•
Registrar Server Domain Name/IP Address:
•
Registrar Server Port Number:
•
Authentication Expire Time:
Registrar server listening port
The time that the SIP registration expires. The phone must send SIP REGIS-
TER to keep the registration at half of the setting time.
•
Outbound Proxy Domain Name/IP Address:
•
Outbound Proxy Port Number:
•
Send messages via Outbound Proxy:
Outbound proxy listening port
Select
Registrar server domain name or IP address.
Outbound proxy domain name or IP address.
Enable to send all SIP requests through Outbound Proxy
14
SmartLink 4050 Series Quick Start Guide
Page 15
4.5 SIP Account Settings
Click on SIP Account Settings to display the configuration window (see figure 11). You can have up to four
accounts—that is, the SIP phone can receive calls from up to four different phone numbers.
Figure 11. SIP Account Settings window
Default Account: When you dial a number, the default account is used to dial. User Name of default account
•
is displayed on the receiver's IP phone.
• Account Active: Enable or disable this account.
• Display Name: Name displayed on the LCD of called party.
• SIP User Name: The number in the URI displayed on the LCD for the caller.
• Authentication User Name: User name to log into the SIP server.
• Authentication Password: Password to log into the SIP server.
• Ringer Type: Eight types of tone and melody can be selected for the specified account
• Register Status: Displays if the current phone is registered or unregistered with SIP server.
SmartLink 4050 Series Quick Start Guide 15
Page 16
5.0 Making a phone call
SPEAKER
8
TUV
SPEAKER
5.1 Dialing an IP address
1. Lift the handset or press the SPEAKER button.
2. Dial an IP address. For example, to dial 192.168.0.1 press:
1
9
WXYZ
OK
2
ABC
*
1
.
6
MNO
.
*
3. Press or wait until the timer expires to dial.
5.2 Dialing a SIP number
Note You must register with a SIP server before using a SIP number.
1. Lift the handset or press the SPEAKER button.
2. Dial a SIP number. For example, to dial 1866 press
1 8
TUV
6
MNO
6
MNO
3. Press or wait until the timer expires to dial.
OK
0
1
@
.
*
16 SmartLink 4050 Series Quick Start Guide
Page 17
6.0 Operating the Internet Radio
1. Press to turn on the Internet radio.
2. Press and to choose a preferred station.
3. Press to turn off the Internet radio.
Phone Book
Cancel
6.1 Key Definitions for Internet Radio
Key Definition Key Definition
Turn on the Internet Radio Increase / decrease the volume
OK
Cancel
Numeral
Keys
Pause / Play Display the name of the current station
Turn off the Internet Radio Tune the Internet Radio to the preferred
The ten numeral keys 0, 1~9 are the quick access keys to the first ten preferred stations on web configuration “Music Station”.
Menu
Phone Book
station
6.2 About Internet Radio
• All the keys related to the Internet Radio are described in the table above. Those key functions will only be
available when the phone is hung up. If the phone is hung on, those key functions will back to the original
designed which has stated in Page.7.
• When the phone is receiving the incoming call, the Internet Radio function will be turned off automatically.
• When the user picks up the handset or presses “SPEAKER” to make a phone call, the Internet Radio will be
also turned off automatically.
• Please turn off the Internet Radio before you do the next steps as below:
• Use pre-dialing to make a phone call
• Enter MENU to configure
• Access Phone Book
• Adjust the Ringer Volume
• When the user is listening to the Internet Radio, the phone will have the current song and singer's name
showing on the screen.
SmartLink 4050 Series Quick Start Guide 17
Page 18
7.0 Additional Information
The complete SmartLink 4050 Getting Started Guide is located on the CD-ROM that came with your SIP phone. It
can also be downloaded for viewing from www.patton.com.
A.0 Compliance Information
A.1 Compliance
EMC:
• FCC Part 15, Class B
• EN55022, Class B
• EN55024
Safety:
• EN60950-1
A.2 Radio and TV Interference (FCC Part 15)
This equipment generates and uses radio frequency energy, and if not installed and used properly—that is, in
strict accordance with the manufacturer's instructions—may cause interference to radio and television reception. This equipment has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable
protection from such interference in a commercial installation. However, there is no guarantee that interference
will not occur in a particular installation. If the equipment causes interference to radio or television reception,
which can be determined by disconnecting the cables, try to correct the interference by one or more of the following measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna,
and/or plugging the receiving equipment into a different AC outlet (such that the computing equipment and
receiver are on different branches).
A.3 EC Declaration of Conformity
We certify that the apparatus identified in this document conforms to the requirements of Council Directive
1999/5/EC on the approximation of the laws of the member states relating to Radio and Telecommunication
Terminal Equipment and the mutual recognition of their conformity.
The safety advice in the documentation accompanying this product shall be obeyed. The conformity to the above
directive is indicated by the CE sign on the device.
A.4 Authorized European Representative
D R M Green, European Compliance Services Limited.
Oakdene House, Oak Road , Watchfield, Swindon, Wilts SN6 8TD, UK
18 SmartLink 4050 Series Quick Start Guide
Page 19
Copyright statement
Copyright © 2008, Patton Electronics Company. All rights reserved.
The information in this document is subject to change without notice. Patton Electronics assumes no
liability for errors that may appear in this document.
Trademarks statement
The term SmartLink is a trademark of Patton Electronics Company. All other trademarks presented in this docu-
ment are the property of their respective owners.
Patton support headquarters in the USA
• Online support: Available at www.patton.com
• E-mail support: E-mail sent to support@patton.com will be answered within 1 business day
• Telephone support: Standard telephone support is available five days a week—from 8:00 am to
5:00 pm EST (1300 to 2200 UTC/GMT)—by calling +1 (301) 975-1007
• Support via VoIP: Contact Patton free of charge by using a VoIP ISP phone to call sip:support@patton.com
• Fax: +1 (253) 663-5693
Alternate Patton support for Europe, Middle East, and Africa (EMEA)
• Telephone support: Standard telephone support is available five days a week—from 8:00 am to
5:00 pm CET (0900 to 1800 UTC/GMT)—by calling +41 (0)31 985 25 55
• Fax: +41 (0)31 985 25 26
Note For additional service and support information, refer to the “Contacting Patton for assistance” chapter
of the SmartLink 4050 Series Getting Started Guide located on the CD-ROM that came with your SIP
phone or available online at www.patton.com.
For additional warranty, trademark, compliance, and technical support information, refer to the SmartLink 4050
Series Getting Started Guide located on the CD-ROM that came with your SIP phone or available online
at www.patton.com.
SmartLink 4050 Series Quick Start Guide 19
Page 20
NOTES
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
20 SmartLink 4050 Series Quick Start Guide
Loading...