Patton electronics Patton SmartNode 2300 Series Specification Sheet

Patton’s SmartNode 2300 Modular VoIP Access Router creates a flexible enterprise solution

for easy integration of voice and data. Scalable, intelligent, and multi-service, the SmartNode 2300 supports up

to 60 simultaneous calls and is equipped with a Sync. Serial router with QoS, NAT, and Firewall.

Complete Service Transparency

Using ISoIP™ and ToIP™ technology, calls are connected

with voice, data, and supplementary services delivered

transparently end-to-end.

H.323v3 and H.323+ VoIP

Connect to any SmartNode or VoIP capable device with universal

call control signalling. Use advanced features including H.245

Fast Connect, Early Start, Annex M3, ECS support, and RAS.

V.35/X.21 Router with Dual Ethernet

Connect your LAN to any broadband access network with its
built-in sync. serial router. Use NAT, DHCP, and ACLs while

guaranteeing voice priority and service quality.

T1/E1, BRI, & FXS Voice Interface Cards

Use any combination of voice interfaces for connection to

any telephone, switch, or service provider. Scale your con-

nections by simply adding new interfaces.

Up to 60 Simultaneous Calls

Supports up to 60 simultaenous calls from any combination

of voice intefaces including T1/E1 PRI, BRI, and FXS.

SMARTNODE 2300 SERIES

he SmartNode 2300 Modular VoIP Access Router is a single flexible
platform for network data and Voice-over-IP applications. Ideal for
the branch office or the small to medium enterprise, the SmartNode

2300 is performance-tuned for packet and voice. Equipped with
dual Ethernet ports, a serial V.35/X.21 port, and three voice interface slots, the
SmartNode 2300 scales up to 60 simultaneous calls in a 1U chassis.

The SmartNode 2300 connects your LAN to the WAN using PPP or Frame
Relay (RFC-1490) eliminating the need for and cost of an extra router. With dual
Ethernet ports and built-in QoS, NAT, DHCP, PPPoE, and ACL/Firewall, the
SmartNode 2300 provides complete LAN network access control.

With Patton’s Telephony-over-IP (ToIP) programmable circuit-switching the
SmartNode links any standard BRI, T1/E1 PRI, or FXS connection to the IP
network. Supporting multiple codecs and T.38/Modem bypass, the SmartNode
seamlessly converges voice, data, and fax over IP.

The SmartNode delivers IP network access with the clarity of toll-quality voice
for a complete LAN, WAN, and Gateway solution. For more information, visit
us at www

.patton.com.

T

Modular VoIP Access Router

Patton SmartNode 2300

VoIP—ToIP

Compatible CODECs

Connect to any gateway with any one of our standard codecs

(including G.711 and G.726). For low bandwidth require-

ments, use G.723.1 and G.729ab vocoders.

Data Connectivity

• 1 10 and 1 10/100Base-T Ethernet, RJ-45

• V.35, X.21 DTE

• IP unnumbered

• Packet fragmentation

• Frame Relay (Q.922, FRF.12)

• RFC 1490 IP over Frame Relay

• LMI (Q.933D, ANSI 617D, Gang of Four)

Voice Signalling

• Euro ISDN EDSS-1/ETSI BRI/NET3

• ETS 300 012-1 (ITU-T I.430)

• ETS 300 402-1 (ITU-T Q.921)

• ETS 300 403-1/2 (ITU-T Q.931)

• ETS 300 102-1 (ITU-T Q.931)

• Q-SIG (PSS-1)

• ECMA-143

• ETSI and ISO/ECMA channel numbering

• SIP and MGCP

• H.323v3

• RAS, H.225, H.245

• Fast-connect, early H.245

• Gatekeeper autodiscovery

• Alias registration

• Overlap sending

• Empty capability set (call transfer, hold)

• H.323v1 call transfer, hold

• ISDN over IP (ISoIP)

• H.323 GW and GK compatible

• H.323 Annex M3

• ISDN/Q-SIG feature tunnelling

• ISDN speech, audio and data (Fax Gr 4, UDI
64, RDI 64)

• ISDN supplementary services

Voice Routing—Session Router™

• Local switching

• Interface huntgroups

• ISDN broadcast message routing

• Routing Criteria

• Interface

• Calling/called party number

• Time of day, day of week, date

• ISDN bearer capability

• Number manipulation functions

• Replace numbers

• Add/remove digits

• Multiple remote gateways

• PLAR

IP Routing

• IPv4 router

• RIPv1, v2 (RFC 1058 and 2453)

• Programmable static routes

• ICMP redirect (RFC 792)

• Packet fragmentation

• Static Firewall

• NAT/PAT/NAPT (RFC 1631)

• Access control lists

IP Quality of Services

• WFQ/Fixed Rate/Priority Queuing

• Combination of QoS schemes with config­urable burst

• DiffServe/ToS set or queue per header bits

• Pocket Policing dicards excess traffic

• 802.1p VLAN tagging

Management

• Industry standard CLI

• Local console (RS-232, RJ-45) and remote

Telnet access

• TFTP configuration down- and upload

• TFTP firmware download

• SNMP v1 agent (MIB II and private MIB)

• Built-in diagnostic tools

• Java™ Applet

• HPOV Integration with NNM

Operating Environment

• Operating temperature: 0–40ºC

• Operating humidity: 5–80% (non condensing)

System

• CPU Motorola MPC860 at 50 MHz
Memory 16MB SDRAM/4 MB Flash

• Power: 100–240 VAC (50/60 Hz)

• Power dissipation 30W (fully loaded)

Compliance

• EMC compliance: EN55022 and EN55024

• Safety compliance: EN 50950

• CE compliance

• FCC Part 15 Class A

7622 Rickenbacker Drive

Gaithersburg, MD 20879 USA

Phone [phone]

Fax [phone]

E-mail [e-mail]

URL http://www.patton.com

07M2300-DS1

Specifications

Model Information

The SmartNode 2300 Modular VoIP Access Router is an intel­ligent multi-service access device providing both routed LAN
services and Voice-Over capabilities.

With its internal router and V.35/X.21 port, remote or local
sites can access public IP services or private data VPNs with­out the added cost of a router.

Adding Voice-Over capabilities are a snap using any combina­tion of field-installable voice and data modules. Now any site
can connect VoIP to any phone with BRI, T1/E1 PRI, or FXS.

Application—Office IP & Voice Access

Meriedweg 7

CH-3172 Niederwangen

Phone [phone]

Fax [phone]

E-mail [e-mail]

URL http://www.inalp.com

SN2300/0V/UI Modular VoIP Access Router with internal 100–240 VAC power supply SNSW-IAF-3 IP Advanced Feature Set (QSIG,QoS, IP Classification)