Patton electronics IM 1/F User Manual

USER
MANUAL

MODEL IM 1/F

G. 703 Interface Module

SALES OFFICE
[phone]
TECHNICAL SUPPORT
[phone]

http://www.patton.com

Part# 07MIM1F-B
Doc# 090071UB
Revised 08/10/99

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model IM 1/F components to be
free from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment.

This warranty is limited to defects in workmanship or materials, and
does not cover customer damage, abuse or unauthorized modification.
If this product fails or does not perform as warranted, your sole
recourse shall be repair or replacement as described above. Under no
condition shall Patton Electronics be liable for any damages incurred
by the use of this product. These damages include, but are not limited
to, the following: lost profits, lost savings and incidental or consequen­tial damages arising from the use of or inability to use this product.
Patton Electronics specifically disclaims all other warranties,
expressed or implied, and the installation or use of this product shall be
deemed an acceptance of these terms by the user.

1.1 RADIO AND TV INTERFERENCE

The Model IM 1/F generates and uses radio frequency energy, and
if not installed and used properly—that is, in strict accordance with the
manufacturer’s instructions—may cause interference to radio and televi­sion reception. The Model IM 1/F has been tested and complies with
the limits for a Class A computing device in accordance with the specifi­cation in Subpart J of Part 15 of FCC rules, that are designed to provide
reasonable protection from such interference in a commercial installa­tion. However, this is no guarantee that interference will not occur in a
particular installation. If the Model IM 1/F does cause interference to
radio or television reception, which can be determined by disconnecting
the unit, the user is encouraged to try to correct the interference by one
or more of the following measures: moving the computing equipment
away from the receiver, reorienting the receiving antenna and/or plug­ging the receiving equipment into a different AC outlet (such that the
computing equipment and receiver are on different branches).

21

1.2 SERVICE

All warranty and nonwarranty repairs must be returned freight pre­paid and insured to Patton Electronics. All returns must have a Return
Materials Authorization number on the outside of the shipping contain­er. This number may be obtained from Patton Electronics Technical
Service at: [phone], http://www.patton.com; support@pat-

ton.com.

Note: Packages received without an RMA number will not be

accepted.

Patton Electronics’ technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model IM 1/F. Technical Service hours: 8AM to 5PM EST, Monday

through Friday.