Patton electronics 590A, 591A User Manual

USER MANUAL
MODEL 590A and MODEL 591A
RS-232 to RS-232 Optical Isolators
Part # 07M59XA-C Doc. # 055061UB Revised 7/5/01
CERTIFIED
An ISO-9001
Certified
Company
SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007
TABLE OF CONTENTS
1.0 Warranty Information .................................................................. 3
1.1 FCC Information ........................................................................... 3
1.2 CE Notice...................................................................................... 3
1.3 Service.......................................................................................... 4
2.0 General Information..................................................................... 5
2.1 Features........................................................................................ 5
2.2 Description.................................................................................... 5
3.0 Configuration............................................................................... 6
3.1 Checking the Default Configuration.............................................. 6
Data Signals: Transmit Data (TD) and Receive Data (RD):......... 6
Control Signals*: DTR/RTS, and CD/DSR/CTS........................... 6
3.2 Setting the Internal Switches........................................................ 7
Selecting the DTE Output Signals (DTR or RTS)......................... 8
3.3 Selecting the DCE Output Signals (CTS, DSR, or CD)................ 9
4.0 Installation.................................................................................. 10
A Model 590A/591A Specifications.............................................. 11
A.1 Transmission Format .................................................................. 11
A.2 Interface Standard ......................................................................11
A.3 Connectors .................................................................................. 11
A.4 Data Rates .................................................................................. 11
A.5 Isolation ....................................................................................... 11
A.6 Power Supply .............................................................................. 11
A.7 Compliance ................................................................................. 11
A.8 Dimensions ................................................................................. 11
A.9 Temperature Range ....................................................................11
A.10 Altitude ........................................................................................ 11
A.11 Weight ......................................................................................... 11
A.12 Humidity ...................................................................................... 11
B Model 590A/591A Pin Assignments......................................... 12
2
1.0 WARRANTY INFORMATION
Patton Electronics
warrants all Model 590A/591A components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
This warranty is limited to defects in w orkmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall
Patton Electronics
be liable for an y damages incurred b y the use of this product. These damages include , b ut are not limited to , the f ollo wing: lost profits, lost savings and incidental or consequential damages arising from the use of or inability to use this product.
Patton Electronics
spe­cifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user.
1.1 FCC INFORMATION
This equipment has been tested and found to comply with the limits f or a Class A digital device, pursuant to P art 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer­ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate r adio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
1.2 CE NOTICE
The CE symbol on your P atton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the Union European (EU). A Certificate of Compliance is availab le by contacting Patton Technical Support.
3
1.3 SERVICE
All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materi­als Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Service at:
Tel:
(301) 975-1007
E-mail: URL:
support@patton.com
www.patton.com
Note
Packages received without an RMA number will not be
accepted.
Patton Electronics’ technical staff is also available to answer any ques­tions that might arise concerning the installation or use of your Model 590A/591A. Technical Service hours:
Friday
.
8AM
to
5PM EST, Monday
through
4
Loading...
+ 8 hidden pages