Patton electronics 500, 501, 502 User Manual

USER
MANUAL

MODEL 500, 501 & 502

RS-232 Surge Protectors

SALES OFFICE
[phone]
TECHNICAL SUPPORT
[phone]

Part# 07M500/1/2-C
Doc# 074230UC
Revised 2/22/96

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 500/501/502 components to
be free from defects, and will—at our option—repair or replace the
product should it fail within one year from the first date of shipment.

This warranty is limited to defects in workmanship or materials, and
does not cover customer damage, abuse or unauthorized modification.
If this product fails or does not perform as warranted, your sole recourse
shall be repair or replacement as described above. Under no condition
shall Patton Electronics be liable for any damages incurred by the use
of this product. These damages include, but are not limited to, the
following: lost profits, lost savings and incidental or consequential
damages arising from the use of or inability to use this product. Patton
Electronics specifically disclaims all other warranties, expressed or
implied, and the installation or use of this product shall be deemed an
acceptance of these terms by the user.

1.1 SERVICE

All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Service at [phone].

Packages received without an

RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 500/501/502. Technical Service hours: 8AM to 5PM EST,

Monday through Friday.

1

APPENDIX A

SPECIFICATIONS

Model 500
Connectors: DB-25, one male, one female
Pins Wired/Protected: 2, 3, 7 & 20
Surge Capacity: 1.5kW for 1 mS
Response Time: Clamped to + or - 27 volts after 0.5 µS,

400 Amps with a 8/20 µS pulse

Model 501
Connectors: DB-25, one male, one female
Pins Wired/Protected: 2, 3, 4, 5, 6, 7, 8 & 20
Surge Capacity: 1.5kW for 1 mS
Response Time: Clamped to + or - 27 volts after 0.5 µS,

400 Amps with a 8/20 µS pulse

Model 502
Connectors: DB-25, one male, one female
Pins Wired/Protected: 2, 3, 4, 5, 6, 7, 8, 15, 17, 20 & 24
Surge Capacity: 1.5kW for 1 mS
Response Time: Clamped to + or - 27 volts after 0.5 µS,

400 Amps with a 8/20 µS pulse

4