Patton electronics 2300M, 2300M-ST, 2300M-SC, 2310M-ST, 2310M-SC User Manual

USER
MANUAL

MODEL 2300M SERIES

OpticLink Ethernet
Media Con verters
(2300M, 2310M,
2311M, & 2312M)

Part# 07M2300M
Doc# 077321U Rev. A
Revised 4/14/03

An ISO-9001

Certified Company

CONTENTS

1.0 Warranty Information ................................................................. 3

1.1 Radio and TV Interference............................................................ 3

1.2 CE Notice...................................................................................... 3

1.3 Service.......................................................................................... 4

2.0 General Information.................................................................... 5

2.1 Features........................................................................................ 5

2.2 Description.................................................................................... 6

3.0 Installation................................................................................... 8

3.1 Installing a media converter.......................................................... 8

3.2 End-to-end connection................................................................ 11

4.0 Operation................................................................................... 12

4.1 LED indicators ............................................................................ 12

A Specifications ........................................................................... 14

A.1 Interfaces/Connectors ................................................................ 14

A.2 Interface Speed .......................................................................... 14

A.3 Transmission Mode ..................................................................... 14

A.4 Twisted-Pair/Copper Cable Type* .............................................. 14

A.5 Fiber Cable Type ........................................................................ 14

1.6 Fiber Wavelength........................................................................ 14

A.7 Fiber Optic Link Budget .............................................................. 15

Transmit power........................................................................... 15

Receiver Sensitivity.................................................................... 15

Delay Time ................................................................................. 15

Typical Fiber Max. Distance....................................................... 15

A.8 Standards ................................................................................... 15

A.9 LED Status Indicators ................................................................. 15

A.10 Compliance ................................................................................. 16

A.11 Power .......................................................................................... 16

A.12 Packaged Weight ....................................................................... 16

A.13 Dimensions ................................................................................. 16

A.14 Environment ................................................................................ 16

2

1.0 WARRANTY INFORMATION

Patton Electronics

warrants all Model 2300M Series components to be
free from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment.

This warranty is limited to defects in w orkmanship or materials, and does
not cover customer damage, abuse, or unauthorized modification. If this
product fails or does not perform as warranted, your sole recourse shall
be repair or replacement as described above. Under no condition shall

Patton Electronics

be liable for an y damages incurred by the use of this
product. These damages include , b ut are not limited to , the f ollo wing: lost
profits, lost savings and incidental or consequential damages arising
from the use of or inability to use this product.

Patton Electronics

spe­cifically disclaims all other warranties, expressed or implied, and the
installation or use of this product shall be deemed an acceptance of
these terms by the user.

1.1 RADIO AND TV INTERFERENCE

The Model 2300M Series generates and uses radio frequency energy,
and if not installed and used properly—that is, in strict accordance with
the manufacturer's instructions—may cause interference to radio and
television reception. The Model 2300M Series has been tested and
found to comply with the limits for a Class A computing device in accor­dance with the specifications in Subpart B of Part 15 of FCC rules, which
are designed to provide reasonable protection from such interference in
a commercial installation. However, there is no guarantee that interfer­ence will not occur in a particular installation. If a 2300M Series unit does
cause interference to radio or television reception, which can be deter­mined by disconnecting the cables, the user is encouraged to try to cor­rect the interference by one or more of the following measures: moving
the computing equipment away from the receiver, re-orienting the receiv­ing antenna, and/or plugging the receiving equipment into a different A C
outlet (such that the computing equipment and receiver are on different
branches).

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is
in compliance with the Electromagnetic Compatibility (EMC) directive

3

and the Low Voltage Directive (LVD) of the Union European (EU). A Cer­tificate of Compliance is available by contacting Technical Support.

This device is not intended to be connected to the public
telephone network.

Caution

1.3 SERVICE

All warranty and nonwarranty repairs must be returned freight prepaid
and insured to Patton Electronics. All returns must have a Return Materi­als Authorization number on the outside of the shipping container. This
number may be obtained from Patton Electronics Technical Services at:

• Tel: +1

• Email:

• URL:

Note

[phone]

[e-mail]

http://www.patton.com

Packages received without an RMA number will not be

accepted.

4

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. It has
been thoroughly inspected and tested and is warranted for

one year

for
parts and labor. If you have any questions about this product, please call
Patton Electronics Technical Support at [phone].

2.1 FEATURES

• Cost effective plug and play solution for conv erting both 10Base-T and

100Base-TX to 10Base-FL, 100Base-FX, and 100Base-SX

• Supports 802.3 and 802.3u, 10Base-T, 10Base-FL, 100Base-TX,

100Base-FX, and 100Base-SX industry standards

• Extends network connections up to 2 km (1.24 miles) (300 m for Model

2311 in 100BASE-SX Mode) over multi-mode fiber media.

• Low power consumption

• Auto-sensing full or half duplex Ethernet operation

• Twisted Pair MDI/MDI-X switch

• ST or SC connectors for connecting to multimode fiber media

• Ultra-miniature MicroPak Chassis

• LED indicators for P o wer, Fiber Link and Activity, and Twisted-pair Link

and Activity

• External power supply adapter with AC and DC options

5