Patton electronics 2021 User Manual

USER
MANUAL

MODEL 2021

Interface Powered
RS-232 to X.21 Converter

SALES OFFICE
[phone]
TECHNICAL SUPPORT
[phone]
http//:www.patton.com

Part #07M2021-C
Doc. #077061UC
Revised 6/5/97

CERTIFIED

An ISO-9001

Certified Company

Dear Valued Customer,

Thank you for purchasing Patton Electronics products! We do

appreciate your business. I trust that you find this user manual helpful.

We manufacture one of the widest selections of data communications
products in the world including CSU/DSU's, network termination units,
powered and self-powered short range modems, fiber optic modems, interface
converters, baluns, electronic data switches, data-line surge protectors,
multiplexers, transceivers, hubs, print servers and much more. We produce
these products at our Gaithersburg, MD, USA, facility, and can custom
manufacture products for your unique needs.

We would like to hear from you. Please contact us in any of the
following ways to tell us how you like this product and how we can meet your
product needs today and in the future.

Web: http://www.patton.com

Sales E-mail: [e-mail]

Support E-mail: [e-mail]

Phone - Sales [phone]

Phone - Support [phone]

Fax: [phone]

Mail: Patton Electronics Company

7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA

We are committed to a quality product at a quality price. Patton
Electronics is BABT and ISO 9001 certified. We meet and exceed the highest
standards in the industry (CE, UL, etc.).

It is our business to serve you. If you are not satisfied with any
aspect of this product or the service provided from Patton Electronics or its
distributors, please let us know.

Thank you.

Burton A.Patton

Vice President

P.S. Please tell us where you purchased this product.

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 2021 components to be
free from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment.

This warranty is limited to defects in workmanship or materials, and
does not cover customer damage, abuse or unauthorized modification.
If this product fails or does not perform as warranted, your sole
recourse shall be repair or replacement as described above. Under no
condition shall Patton Electronics be liable for any damages incurred
by the use of this product. These damages include, but are not limited
to, the following: lost profits, lost savings and incidental or
consequential damages arising from the use of or inability to use this
product. Patton Electronics specifically disclaims all other warranties,
expressed or implied, and the installation or use of this product shall be
deemed an acceptance of these terms by the user.

1.1 RADIO AND TV INTERFERENCE

The Model 2021 generates and uses radio frequency energy, and if
not installed and used properly—that is, in strict accordance with the
manufacturer's instructions—may cause interference to radio and
television reception. The Model 2021 has been tested and found to
comply with the limits for a Class A computing device in accordance
with the specifications in Subpart J of Part 15 of FCC rules, which are
designed to provide reasonable protection from such interference in a
commercial installation. However, there is no guarantee that
interference will not occur in a particular installation. If the Model 2021
does cause interference to radio or television reception, which can be
determined by disconnecting the RS-232 interface, the user is
encouraged to try to correct the interference by one or more of the
following measures: moving the computing equipment away from the
receiver, re-orienting the receiving antenna and/or plugging the
receiving equipment into a different AC outlet (such that the computing
equipment and receiver are on different branches).

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates
that it is in compliance with the Electromagnetic Compatibility (EMC)
directive and the Low Voltage Directive (LVD) of the Union European
(EU). A Certificate of Compliance is available by contacting Technical
Support.

1

1.3 SERVICE

All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Support: [phone]; http://www.patton.com; or,

[e-mail].

NOTE: Packages received without an RMA number will not be

accepted.

Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 2021. Technical Support hours: 8AM to 5PM EST, Monday

through Friday.

2

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is
warranted for One Year parts and labor. If any questions or problems
arise during installation or use of this product, please do not hesitate to
contact Patton Electronics Technical Support at 301-975-1000.

2.1 FEATURES

• Bi-directionally converts synchronous RS-232 to X.21

• Data rates to 384 Kbps, full or half duplex

• Transparent to protocol

• No AC power or batteries required

• DB-25 and DB-15 connectors with integral 6 foot cable

• Circuitry housed in ultra-miniature case

• Made in the USA

2.2 DESCRIPTION

The Model 2021 RS-232 to X.21 converter lets a synchronous

RS-232 device communicate bi-directionally with a synchronous X.21
device. The Model 2021 requires no AC power or batteries to operate
and supports data rates to 384 Kbps. Operating full or half duplex, the
Model 2021 passes all necessary clocking and control signals, and is
transparent to protocol.

The Patton Model 2021 connects directly to the synchronous
RS-232 interface using a male or female DB-25 connector. A male or
female DB-15 connector at the end of an integral 6 foot cable plugs into
the X.21 interface. In most cases, this eliminates the need for special
crossover cables. Housed in an ultra-minature case measuring only

3.56”L x 2.10”W x 0.80” H, the Model 2021 fits easily into tight
locations. The Model 2021 is manufactured by Patton Electronics in
the USA.

43

3.0 INSTALLATION

The Model 2021 is designed to be easy to use. Since there is
nothing to configure, all you need to do is plug the Model 2021 into the
proper device ports.

Figure 1 below illustrates proper connection of an RS-232 DTE to
an X.21 DCE using the Model 2021XC-XT.

To connect an RS-232 DCE to an X.21 DTE, use the Model
2021xT-xC, as shown in Figure 2.

X.21 Host (DTE)

RS-232 Sync Modem (DCE)

Figure 1. Sync Terminal connected to X.21 Modem using Model 2021XC-XT

Figure 2. RS-232 Sync Modem connected to X.21 Host using Model 2021XT-XC

X.21 Modem (DCE)

Sync. Terminal (DTE)

APPENDIX A

PATTON MODEL 2021 SPECIFICATIONS

Interfaces: EIA RS-232/ITU/CCITT V.24, ITU/CCITT

X.21

Data Rates: 0 - 384 Kbps
Transmission Mode: Full or half duplex
Protocol: Transparent to protocol
Clocking: Set by connected DCE devices
Connectors: DB-25 male or female on RS-232 side, DB-

15 male or female on X.21 side

Power Supply: None required; uses power from RS-232

data and control signals

Temperature Range: 0-60°C (32-140°F)
Altitude: 0-15,000 feet (0-5,000 meters)
Humidity: 5 to 95% non-condensing
Dimensions: 2021XC-XT: 2.66"L x 2.10"W x 0.73"H

2021XT-XC: 3.56”L x 2.10”W x 0.80”H

Weight: 14 oz, including cable and connectors

APPENDIX B

PATTON MODEL 2021 INTERFACE STANDARDS

5 6

Model 2021 X.21 Interface

1 FRAME GROUND
2 TRANSMITTED - A
3 CONTROL - A
4 RECEIVE - A
5 INDICATION - A
6 SIGNAL TIMING - A
7
8 SIGNAL GROUND

TRANSMIT B 9

CONTROL B 10

RECEIVE B 11

INDICATION B 12

14
15

SIGNAL TIMING 12

1- (FG) Frame Ground
2- (TD) Transmit Data
3- (RD) Receive Data
4- (RTS) Request to Send
5- (CTS) Clear to Send
6- (DSR) Data Set Ready
7- (SG) Signal Ground
8- (DCD) Data Carrier Detect
9- (DCV) +DC Test Voltage

14

Transmit Clock -15

16

Receive Clock -17

18
19

Data Term. Ready (DTR) - 20

21
22
23

External Transmit Clock -24

Test Mode (TM) -25

Model 2021 RS-232 Interface

1- Frame Ground
2- Transmit - A
3- Control - A
4- Receive - A
5- Indication - A
6- Signal Timing - A
7
8- Signal Ground

Transmit - B - 9

Control - B -10

Receive - B -11

Indication - B -12

Signal Timing -13

14
15

APPENDIX C

PATTON MODEL 2021XT-XC BLOCK DIAGRAM

Copyright ©

Patton Electronics Company

All Rights Reserved

APPENDIX C

PATTON MODEL 2021XC-XT BLOCK DIAGRAM

DTE

DCE

DCE

DTE

7 8