Patton electronic S-DTA User Manual

T

he Smart-DTA enables integration of
ISDN network users into a local VoIP

phone service, or extends an ISDN line
of a PBX to a remote site over IP. It offers a
simple end-user configuration interface and
connects both to a PBX in point-to-point mode
and an So bus in point-multipoint mode.

Unlike most other products on the market,
Patton’s intelligent call routing technology
does not only offer simple ISDN to VoIP, but
also advanced features like number plan
adaptations, mappings between ISDN and
SIP/H.323, manipulation of call properties
through regular expressions, routing calls
based on time-of-day or bearer capability cri­teria and much more.

Providing power to the ISDN line, the S-DTA
eliminates the need for an external power
supply to provide power to the terminals.
Gateway functions use standard CODECs
such as G.723, G.729, and T.38 fax as well as
industry standard SIP,
H.323 and MGCP/IUA
signaling protocols to
ensure seamless con­nection and compatibility
for all voice services.
Quality of service (QoS)
features complete the
offering with advanced voice prioritization
and traffic management including VLAN and

802.1p/Q tagging.

Visit www

.patton.com for more information.

The Patton S-DTA brings all advantages of VoIP to ISDN users. It connects multiple terminals to its
BRI So bus, and converts 2 concurrent voice or fax calls to SIP or H.323 —at an incredibly low price.

Smart-DTA Residential
Digital Telephone Adapter

Model S-DTA

VoIP

Full SIP and T.38 support

Complete range of industry standard signaling
protocols supported: SIPv2, H.323v4,
MGCP/IUA, ISDN, BRI, T.38, fax and modem
bypass, DTMF relay.

Integrated Management
and Provisioning

Web GUI for easy end-user setup, fully automat­ed provisioning system and SNMP management
for mass deployment.

Outstanding Interoperability

Interoperable for voice and fax calls with a wide
variety of ISDN terminals, PBXs, as well as SIP
and H.323 soft switches and application servers.

Transparent Telephony Features

Preserves ISDN features like caller ID and name
(CLIP/CLIR), call transfer, hold, waiting, charging
information (AOC) and much more.

Instant ISDN to VoIP Connectivity

Provides one internally powered So bus for up to
8 terminals. Simultaneously converts 2 voice and
fax calls to VoIP.

Special Rates Available

Call for Details

100–240 VAC

external power supply

Front panel indicators

show system status

at-a-glance

Proven

Patton design,

Patton supported

ISDN TE

BRI/So port

10/100Base-T

Ethernet LAN port

7622 Rickenbacker Drive

Gaithersburg, MD 20879 USA

Phone

++11--330011--997755--11000000

Fax

++11--330011--886699--99229933

E-mail

ssaalleess@@ppaattttoonn..ccoomm

Web

wwwwww..ppaattttoonn..ccoomm

07MSDTA-DS4

Meriedweg 7

CH-3172 Niederwangen

Phone

++4411 ((3311)) 998855 2255 2255

Fax

++4411 ((3311)) 998855 2255 2266

E-mail

ssaalleess@@iinnaallpp..ccoomm

Web

wwwwww..iinnaallpp..ccoomm

Patton is a registered trademark and the termsSmartNode, DownStreamQoS,and SessionRouter
are trademarks of Patton Electronics Company in the United States and other countries.

* Specifications subject to change without notice.

Network Integration

Patton’s Smart Digital Telephony Adapter provides seamless access to
Internet telephony services for ISDN terminals. The S-DTA connects to any
LAN or broadband access provider via modem.

S-Bus

• • •

Up to 8 ISDN phones

Home LAN

PC

Internet

ISDN Home User

S-DTA

S-DTA/P/EUI: ISDN VoIP adapter, 1x BRI/So, 2 voice/fax calls, 1x 10/100 Ethernet,

external UI power (100–240 VAC)

Ordering Information

Specifications*

WAN Connectivity

10/100Base-T Ethernet WAN • Auto-MDI­X • DHCP Client • PPPoE Client (multi­session) • SNTP • IP Multi-Netting

IP Quality of Service

IEEE 802.1p, TOS, DiffServ Labeling •
IEEE 802.1Q, VLAN Tag insertion/deletion
(4,096 VLANs)

Management

Web-based GUI • Fully documented CLI •
Telnet and HTTP access • TFTP configu­ration up- and download • TFTP firmware
upgrade • SNMPv1 agent, MIB II and
enterprise MIB • Built-in diagnostic tools

• Auto-Provisioning—Configuration
and Firmware

Fax and Modem Support

T.38 fax over IP • Fax relay and bypass •
Modem bypass

ISDN Specification

1 port Euro-ISDN BRI/So RJ-45, NT •
DSS-1, Q.921, Q.931 • Point-to-point &
point-to-multipoint • Line power for
ISDN terminals

Voice Signaling

SIPv2 • H.323v4 • MGCP/IUA • SIP call
transfer, redirect • Overlap or en-bloc
dialing • DTMF in-band & out-of-band •
Configurable call progress tones

Call Routing & Services: Regular expres­sion number matching • Regular expres­sion number manipulation • Least Cost

Routing • Number blocking • Short­Dialing • Digit collection • Distribution­Groups & Hunt-Groups • 2nd call offering

Voice Processing

G.723.1 (5.3/6.3 kbps) • G.729, G.729a,
G.729ab (8 kbps) • G.726 ADPCM
(16, 24, 32, 40 kbps) • G.168 echo can­cellation (25 ms) • Transparent ISDN
data • Silence suppression and comfort
noise • Adaptive and configurable dejitter
buffer • Configurable packet length

Dimensions

4.2W x 1.5H x 5.0D in.
(10.6W x 3.9H x 12.7D cm)

Weight

< 15.9 oz (450 g)

Power Consumption

< 4W

Operating Temperature

32–104°F (0–40°C)

Humidity

Up to 90%, non condensing

Compliance

FCC Part 15 Class B (US EMC) • CE per
RTTE 99/5/EC (EMC and LVD) • Safety—
EN60950 • TBR-3 (ISDN BRI/So)