Patton electronic 6511 User Manual

Optical or Electrical Egress

Choose between short-haul electrical BNC or
intermediate-range optical SC connectors

Redundant Packet Switching

Reliable packet switching architecture ensures
redundant paths for deploying mission-critical

Hot Swappable and Redundant

For critical applications use dual 6511s and get
1+1 redundancy. Hot-swap cards for fast main-

Move data rapidly with the Patton 6511 Matrix Switch and get non-blocking any-to-any TDM access,

Packet Switched Ethernet, and high-speed trunking...all in a single card

Matrix Switch with STM-1/OC-3
and Gigabit Ethernet

ForeFront

™

AIS

Model 6511

T

he Patton Model 6511 Matrix Switch is
an integrated multimedia switching

engine complete with a digital access
cross-connect, high-speed STM-1/OC-3 trunk
interface, wire-speed Ethernet packet switch,
and GUI management system.

The Model 6511’s flexible channel switching
fabric allows non-blocking switching from
any input to any output. The Channelized
STM-1/OC-3 interface integrates into a
SDH/SONET network, enabling users to
channelize an STM-1/OC-3 down to 64 kbps
timeslots. With full grooming capability the
Model 6511 DACS allows any-to-any TDM
mapping and can place any channel from any
card onto any port.

Combined with the ForeFront AIS Packet­Switched Backplane, the Model
6511 redundantly interconnects
every slot, at wire-speed, and
aggregates traffic from each sys­tem card onto dual-switched uplink
Ethernet ports. With increased per­formance and throughput, the

packet backplane allows non-blocking access
to the Model 6511, other system cards, and
the uplink ports.

With the Forefront architecture, TDM and pack­et can be used simultaneously and to full
capacity. In a system loaded with dual 6511’s,
the high speed channel switching and packet
backplane on the Model 6511 offers 1+1 redun­dancy.

Management is a snap with VT-100, TELNET,
SNMP and WEB options. Manage traffic out­of-band via dual 10/100/1000 Ethernet ports
or terminate PPP/FR via timeslots in-band.
With the integrated L2/L3 switch the Model
6511 provides managment access to all
cards within the chassis

Master time and space with the Model 6511
Matrix Switch and realize an unequaled level
of density and control over the new conver­gent network.

Visit www

.patton.com for more informa-

tion.

Non-Blocking I/O Fabric

Get dedicated connectivity to every input and
every output port while grooming TDM or
switching packet data

Integrated STM-1/OC-3 DACS

Resolve traffic down to 64 kbps timeslots,
switch any timeslot to any port or loop it back

6511RC Matrix

Get high speed channel-

ized DACS, timeslot

mapper, and layer 2

packet aggregation.
Use with 6511RCT and
get high speed network

access from DS-3 and

STM-1/OC-3.

6511RCT STM-1

Trunk Module

Choose intermediate

optical or short-haul

electrical channelized

STM-1/OC-3 interfaces.

Dual 10/100/1000 Mbps

switched Ethernet ports for

system packet aggregation.

WEB/SNMP Manageable

Get fault detection and resolution standard.
Use the embedded HTTP/SNMP agent to man-

07MD6511-DS4

Backplane Diagram

Patton is a registered trademark and IPLink is a trade­mark of Patton Electronics Company in the United States
and other countries.

Specifications

ForeFront System Elements

ForeFront Next Generation DSL Network Access

The ForeFront architecture guarantees total non-blocking oper­ation for any TDM application and for Packet switching applica­tions over the redundant Packet Switching Bus (PSB). With the
ability to simultaneously transmit and receive on both full­duplex 10/100/1000 Ethernet up-link ports, the 6511RC offers
unparalleled switching to any DSL, E1, STM-1/OC-3 media as
well as redundant PSB and TDM buses.

Patton’s ForeFront Access Solutions for DSL address the new point­of-presence requirements demanded by today’s providers operating
IP and TDM networks. Using a modular approach, the ForeFront AIS
includes all system components to provide DSL access. Fully redun­dant power and integrated cooling enable the lightweight chassis to
scale for density and services. DSL line cards offer the latest
ITU/ETSI G.SHDSL technology for true standards based connectivity.
Grooming facilities and high speed softswitch allow any-to-any
cross-connecting to T1/E1s or STM-1/OC-3 interfaces. Integrated
management gives command over the entire system end-to-end and
offers tools for fault detection, isolation, and correction.

nxT1/E1

TDM

Egress

High-Speed

Trunk Egress

IP/Packet

&

STM-1/OC-3

Complete user flexibility allows
switching of any time slot from
any interface to any port within

the system.

DSL Concentrator

3096RC T-DAC

6511 Matrix Switch

DSL Concentrator

DSL Concentrator

G.SHDSL Access

Connections

Timeslot Mapper

TDM/PSB

Backplane

DS1-SF, SLC-95, ESF, E1–G.704 basic, CRC-4 multi­frame (G.706 framing), DS3–M23, C-bit parity formats,
E3–G.751, G.832 E3, STM-1–G.707, SONET/STS-3–Per
ANSI T1.105-2001
DS1–VT1.5 -> STS-1 SPE, TU-11 -> STM1/VC3, TU-11

-> TUG3 -> STM1/VC4, TU12 -> STM1/VC3, TU-12 ->
TUG3 -> STM1/VC4; E1–VT2 -> STS1 SPE, TU-12 ->
STM-1/VC3, TU-12 -> TUG3 -> STM-1/VC4; DS3–DS3

-> VC3 -> AU3 -> STS-1 SPE; STM-1 –G.707;
SONET/STS3– Per ANSI T1.105.02-2001
STM-1–G.813; STS-3 - ANSI T1.101-1999, T1.105.09­1995, G4-1244
G.821 & G.826 (ES, SSES, US, EB, and BBE; T1.231 &
GR-253-CORE ES, SES, US and SEFS
PRBS per ITU-T 0.151 & 0.152; DS3/E3 Diagnostic &
Line Loopback; DS2 Demux Loopback; T1/E1 Diagnostic
& Loopback

Dual 10/100/1000 Base-T (RJ-45 connector)
Single mode dual SC fiber (20km) per G.957 using 1310
nm lasers per G.652 or Dual 75-Ohm BNC per G.703
LEDs for power, CPU, Dual Ethernet, test mode, egress
synchronization, egress trunk status
HTTP, SNMP, TELNET Ethernet, RS-232 Console Port,
SYSLOG Client, Remote Software Upgrade via FTP

Configurable alarms; Remote SNMP Traps; Front Panel
LEDs
Safety: UL/CSA per UL1950 (METS) Canadian cMET and
CS-03. EMC Directive 89/336/EEC, FCC Part 15, CE
Mark, CTR12, CTR13 FCC Part 68. Laser Safety: Class
1, IEC-825-1, 1993
Operating temperature: 14 to 140°F (0 to 60°C);
Humidity: 5 to 90%, non-condensing

Line Framing

Mapping

Clocking

Error Counts

Line Testing

Ethernet Ports
STM-1/STS-3 Ports

LED Indicators

Management
Services
Alarm Reporting

Compliance

Environment

Patton-Inalp Networks AG

Meriedweg 7

CH-3172 Niederwangen

Switzerland

Phone

++4411 ((3311)) 998855 22 55 2255

Fax

++4411 ((3311)) 998855 22 55 2266

E-mail

ssaalleess@@iinnaallpp..ccoomm

Web

wwwwww..iinnaallpp..ccoomm

Patton Electronics Co.

7622 Rickenbacker Drive

Gaithersburg, Maryland 20879

USA

Phone

++11 330011 997755 11000000

Fax

++1

1 330011 886699 99229933

E-mail

ssaalleess@@ppaattttoonn..ccoo mm

Web

wwwwww..ppaattttoonn..ccoo mm

PE-Inalp Networks Private Ltd

Old No. 14 and New No.6,

Brahadambal Road,

Nungambakkam High Road

Chennai: 600 034, India

Phone

++9911 44 44 44 55 44 99 00 33 99 55 //66 //77

Fax

++9911 44 44 44 55 44 99 ..00339944

Email

ssaall ee ss @@ p

paattttoo nn.. cc oo.. iinn

Web

ww wwww..pp aa tt tt oonn ..ccoo ..ii nn

An Associate of

Electronics Co., USA