This is a Class A device and is intended for use in a light industrial (commercial) environment only. It is not intended nor approved for
use in a heavy industrial or residential environment.
This device is approved for connection to the public ISDN telecommunication network, over BRI/S0-ISDN interfaces.
The terms SmartNode, SmartWare and SmartView are trademarks of Patton
Electronics Company. All other trademarks presented in this document are the property of their respective owners.
The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document.
Warranty Information
The software described in this document is furnished under a license and may be used
or copied only in accordance with the terms of such license. For information about the
license, see Appendix F, "End user license agreement" on page 48 or go towww.patton.com.
Patton Electronics warrants all SmartNode router components to be free from defects,
and will—at our option—repair or replace the product should it fail within one year
from the first date of the shipment.
This warranty is limited to defects in workmanship or materials, and does not cover
customer damage, abuse or unauthorized modification. If the product fails to perform
as warranted, your sole recourse shall be repair or replacement as described above.
Under no condition shall Patton Electronics be liable for any damages incurred by the
use of this product. These damages include, but are not limited to, the following: lost
profits, lost savings and incidental or consequential damages arising from the use of or
inability to use this product. Patton Electronics specifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed
an acceptance of these terms by the user.
1 General information...................................................................................................................................... 14
5 Contacting Patton for assistance ................................................................................................................... 31
A Compliance information .............................................................................................................................. 34
B Specifications ................................................................................................................................................ 36
C Cabling ......................................................................................................................................................... 39
D Port pin-outs ................................................................................................................................................ 41
E SmartNode 5200 factory configuration ........................................................................................................ 43
F End user license agreement ........................................................................................................................... 48
Summary Table of Contents ........................................................................................................................... 3
Table of Contents ........................................................................................................................................... 4
List of Figures ................................................................................................................................................. 7
List of Tables .................................................................................................................................................. 8
About this guide ............................................................................................................................................. 9
Safety when working with electricity ...............................................................................................................11
General observations .......................................................................................................................................12
Typographical conventions used in this document................................................................................................ 13
General conventions .......................................................................................................................................13
1 General information...................................................................................................................................... 14
SmartNode 5200 front panel ..........................................................................................................................17
Planning the installation ........................................................................................................................................21
Site log ............................................................................................................................................................21
Network information ......................................................................................................................................21
IP related information .....................................................................................................................................22
Power source ...................................................................................................................................................22
Location and mounting requirements .............................................................................................................22
Installing the gateway router..................................................................................................................................22
Placing the SmartNode ...................................................................................................................................22
Configuring the desired IP address ........................................................................................................................27
Factory-default IP settings ...............................................................................................................................27
Changing the WAN IP address .......................................................................................................................27
Connecting the SmartNode to the network...........................................................................................................28
Loading the configuration (optional) .....................................................................................................................29
Additional information ..........................................................................................................................................30
5 Contacting Patton for assistance ................................................................................................................... 31
Out-of-warranty service .............................................................................................................................33
Returns for credit ......................................................................................................................................33
Return for credit policy .............................................................................................................................33
A Compliance information .............................................................................................................................. 34
CE Declaration of Conformity..............................................................................................................................35
Authorized European Representative.....................................................................................................................35
B Specifications ................................................................................................................................................ 36
Data connectivity ..................................................................................................................................................37
IP services..............................................................................................................................................................37
Operating temperature ....................................................................................................................................38
Weight and power dissipation ...............................................................................................................................38
C Cabling ......................................................................................................................................................... 39
D Port pin-outs ................................................................................................................................................ 41
F End user license agreement ........................................................................................................................... 48
End User License Agreement.................................................................................................................................49
2. Title ............................................................................................................................................................49
3. Term ...........................................................................................................................................................49
4. Grant of License ..........................................................................................................................................49
7. Other licenses .............................................................................................................................................50
This guide describes the SmartNode 5200 hardware, installation and basic configuration. For detailed software
configuration information refer to the SmartWare Software Configuration Guide and the available Configura-
tion Notes.
Audience
This guide is intended for the following users:
• Operators
• Installers
• Maintenance technicians
Structure
This guide contains the following chapters and appendices:
• Chapter 1 on page 14 provides information about router features and capabilities
• Chapter 2 on page 18 contains an overview describing router operation and applications
• Chapter 3 on page 20 provides hardware installation procedures
• Chapter 4 on page 25 provides initial procedures for configuring the SmartNode router
• Chapter 5 on page 31 contains information on contacting Patton technical support for assistance
• Appendix A on page 34contains compliance information for the SmartNode
• Appendix B on page 36 contains specifications for the routers
• Appendix C on page 39 provides cable recommendations
• Appendix D on page 41 describes the router’s ports and pin-outs
• Appendix E on page 43 lists the factory configuration settings for SmartNode 5200
• Appendix F on page 48 provides license information that describes acceptable usage of the software pro-
vided with the SmartNode 5200
For best results, read the contents of this guide before you install the router.
9
SmartNode 5200 Getting Started Guide About this guide
Notes, cautions, and warnings, which have the following meanings, are used throughout this guide to help you
become aware of potential problems. Warnings are intended to prevent safety hazards that could result in personal injury. Cautions are intended to prevent situations that could result in property damage or
impaired functioning.
Note
A note presents additional information or interesting sidelights.
The alert symbol and IMPORTANT heading calls attention to
important information.
The alert symbol and CAUTION heading indicate a potential hazard. Strictly follow the instructions to avoid property damage.
The shock hazard symbol and CAUTION heading indicate a
potential electric shock hazard. Strictly follow the instructions to
avoid property damage caused by electric shock.
The alert symbol and WARNING heading indicate a potential safety hazard.
Strictly follow the warning instructions to avoid personal injury.
The shock hazard symbol and WARNING heading indicate a potential electric
shock hazard. Strictly follow the warning instructions to avoid injury caused
by electric shock.
10
SmartNode 5200 Getting Started Guide About this guide
Do not open the device when the power cord is connected. For systems
without a power switch and without an external power adapter, line voltages are present within the device when the power cord is connected.
•
For devices with an external power adapter, the power adapter shall be a
listed Limited Power Source The mains outlet that is utilized to power the
device shall be within 10 feet (3 meters) of the device, shall be easily
accessible, and protected by a circuit breaker in compliance with local regulatory requirements.
•
For AC powered devices, ensure that the power cable used meets all applicable standards for the country in which it is to be installed.
•
For AC powered devices which have 3 conductor power plugs (L1, L2 &
GND or Hot, Neutral & Safety/Protective Ground), the wall outlet (or
socket) must have an earth ground.
•
For DC powered devices, ensure that the interconnecting cables are rated
for proper voltage, current, anticipated temperature, flammability, and
mechanical serviceability.
•
WAN, LAN & PSTN ports (connections) may have hazardous voltages
present regardless of whether the device is powered ON or OFF. PSTN
relates to interfaces such as telephone lines, FXS, FXO, DSL, xDSL, T1, E1,
ISDN, Voice, etc. These are known as “hazardous network voltages” and
to avoid electric shock use caution when working near these ports. When
disconnecting cables for these ports, detach the far end connection first.
•
Do not work on the device or connect or disconnect cables during periods of
lightning activity
This device contains no user serviceable parts. This device can only be
repaired by qualified service personnel.
This device is NOT intended nor approved for connection to the PSTN. It is
intended only for connection to customer premise equipment.
In accordance with the requirements of council directive 2002/
96/EC on Waste of Electrical and Electronic Equipment (WEEE),
ensure that at end-of-life you separate this product from other
waste and scrap and deliver to the WEEE collection system in
your country for recycling.
11
SmartNode 5200 Getting Started Guide About this guide
Electrostatic Discharge (ESD) can damage equipment and impair electrical circuitry. It occurs when electronic printed circuit cards are improperly handled
and can result in complete or intermittent failures. Do the following to prevent
ESD:
•
Always follow ESD prevention procedures when removing and replacing
cards.
•
Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. Connect the clip to an unpainted surface of the chassis frame to safely
channel unwanted ESD voltages to ground.
•
To properly guard against ESD damage and shocks, the wrist strap and cord
must operate effectively. If no wrist strap is available, ground yourself by
touching the metal part of the chassis.
General observations
• Clean the case with a soft slightly moist anti-static cloth
• Place the unit on a flat surface and ensure free air circulation
• Avoid exposing the unit to direct sunlight and other heat sources
• Protect the unit from moisture, vapors, and corrosive liquids
12
SmartNode 5200 Getting Started Guide About this guide
This section describes the typographical conventions and terms used in this guide.
General conventions
The procedures described in this manual use the following text conventions:
Table 1. General conventions
ConventionMeaning
Garamond blue type
Futura bold typeCommands and keywords are in boldface font.
Futura bold-italic typeParts of commands, which are related to elements already named by the user, are
Italicized Futura typeVariables for which you supply values are in italic font
Futura typeIndicates the names of fields or windows.
Garamond bold typeIndicates the names of command buttons that execute an action.
< >Angle brackets indicate function and keyboard keys, such as <SHIFT>, <CTRL>,
[ ]Elements in square brackets are optional.
{a | b | c}Alternative but required keywords are grouped in braces ({ }) and are separated
blue screenInformation you enter is in blue screen font.
screenTerminal sessions and information the system displays are in screen font.
nodeThe leading IP address or nodename of a SmartNode is substituted with node in
SNThe leading SN on a command line represents the nodename of the SmartNode
#An hash sign at the beginning of a line indicates a comment line.
Indicates a cross-reference hyperlink that points to a figure, graphic, table, or section heading. Clicking on the hyperlink jumps you to the reference. When you
have finished reviewing the reference, click on the Go to Previous View
button in the Adobe® Acrobat® Reader toolbar to return to your starting point.
SmartNode 5200 front panel ..........................................................................................................................17
14
SmartNode 5200 Getting Started Guide 1 • General information
The SmartNode 5200 Enterprise Session Border Router (see figure 1) combines Ethernet switching, IP routing, VPN/Security, and Quality of Service with high-quality Voice over IP (VoIP) session control. This combination allows you to leverage low-cost Internet Telephony on existing IP-PBX equipment for complete SoHo
and branch office voice and data connectivity.
Figure 1. SmartNode 5200
The SmartNode 5200 is equipped with a 10/100Base-T Ethernet WAN port and an integrated 4-port
10/100Base-T Ethernet switch.
The SmartNode 5200 Enterprise Session Border Router performs the following major functions:
• Standard compliant VoIP in accordance with SIP or H.323 protocols.
• Internet access and IP Routing with IP Quality of Service (QoS) support for mixed voice and data traffic.
• Enable universal SIP trunking for up to 32 SIP sessions
SmartNode 5200 overview15
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.