Patton electronic 2720-T1 User Manual

O
ne of the smallest and most economi-
cal CSU/DSUs available, the Model
2720 is loaded with features usually
found in more expensive units: flexible clock-
ing modes, AMI/B8ZS coding, diagnostics,
and nx56/nx64 rates—all easily configurable
through switches or VT-100 console.
services for all nx56/nx64 kbps to 1.544
Mbps rates and connects to the customer’s
router, FRAD, CODEC, and LAN with V.35, RS-
530, or 10Base-T interfaces. Front panel
LEDs and switches allow for instant diagnos-
tics and service monitoring. Use the VT-100 console port for complete command and con­trol over your T1 termination. AC or DC power options make installing the Model 2720 into your network infrastructure a snap.
The wide variety of fea­tures, compact size, and low price make Patton’s T1 CSU/DSUs the right solution for your next network challenge.
For more information, visit us at
www
.patton.com.
The Patton 2720 T1 CSU/DSU terminates T1 and Fractional T1 services, and converts to V.35, EIA-530, and 10Base-T Ethernet.
Network Termination Unit
Patton 2720 T1 and Fractional T1 CSU/DSU
NetLink™ Access Products
Eliminates Routers
Bridge Ethernet across the WAN using industry standard PPP/BCP
Standalone or Rack Solutions
Available to suit your needs: small desktop unit, or high density rack cards
Power it Anywhere
Universal input AC (90–240V), and
-48 VDC power supply options
Full Diagnostics Included 44 Mbps
V.52 511 BERT, 2047, QRSS, V.54 loopbacks, and CO loop-up/loop-down diagnostics
VT-100 Control Port With Full DS0 Mapping
nx56/nx64 channel selection from 64 kbps to 1.544 Mbps
Connect to Any Terminal Interface
Smooth clock V.35 and EIA-530 connection, and 10Base-T Ethernet
Special Rates
Available
Call for Details
Power from universal AC inputs or -48 VDC
Control Port
V.35, EIA-530, or
10Base-T interfaces
RJ-48C
network connector
LEDs display network data, and
diagnostic status at a glance
Front panel switches for
loops and test patterns
2U-high rack card has the
same features and interfaces
as the Model 2720
07MD2720-DS2
Application—LAN-to-LAN without a router
NetLink T1/FT1 Product Family*
Patton
is a registered trademark and of Patton Electronics
Company in the United States and other countries.
* Specifications subject to change without notice.
Connecting a remote LAN to headquarters has never been easier—or more economical! Place one Model 2720/I at each LAN location, use MAC and PPP/BCP bridging in the Model 2720s to provide seamless LAN-to-LAN connection over the wide-area T1 network.
DTE Interface Power Supplies Dimensions Weight Line Rate Line Connector Line Coding Line Framing DS0 Start Position Line Build-Out DTE Interface DTE Rates Clocking Diagnostics Compliance Temp/Humidity
1.544 Mbps (T1/FT1)
RJ-48C (100 ohms)
AMI or B8ZS
D4 or ESF
Any position, contiguous/non-contiguous mapping when configured via VT-100 console
Receiver: automatic. Transmitter: 0, -7.5, -15, -22.5 dB, DSX-1 level V.35 (M/34 female), EIA-530 (DB-25 female), or 10Base-T Ethernet (RJ-45 female)
nx56/nx64 kbps (V.35, EIA-530); nx56/nx64 kbps to 10Base-T (10 Mbps)
Smooth clocking—internal, external, or network
V.54 local/remote loop; responds to CO-initiated loop-up and loop-down codes. ESF line-loop and payload FDL messages. Diagnostics patterns: 511, 2047, and QRSS
FCC Part 15 Class A and Part 68. AT&T 62411, TR54016, ANSI T1.403
32 to 122°F (0 to 50°C)/5 to 90% relative humidity, non-condensing
UI (100–240 VAC) or -48 VDC
1.50 H x 4.17 W x 5.84 D inch (3.84 H x 10.6 W x 14.84 D cm)
1.0 lbs (0.45 kg)
AC or DC rack power supplies
3.0 H x 0.83 W x 7.84 D inch (7.6 H x 2.1 W x 19.0 D cm)
0.31 lbs (0.14 kg)
V.35 EIA-530 10Base-T
2720/C
2720/B
2720/I
V.35 EIA-530
10Base-T
2710RC/A/I
2710RC/B/B
2710RC/C/IA
Patton-Inalp Networks AG
Meriedweg 7
CH-3172 Niederwangen
Switzerland
Phone
++4411 ((3311)) 998855 2255 2255
Fax
++4411 ((3311 )) 998855 2255 22 66
E-mail
ssaalleess@@iinnaallpp..ccoomm
Web
wwwwww..iinnaallpp..ccoomm
Patton Electronics Co.
7622 Rickenbacker Drive
Gaithersburg, Maryland 20879
USA
Phone
++11 330011 997755 1100 0000
Fax
++1
1 330011 886699 992299 33
E-mail
ssaalleess@@ppaattttoonn..ccoomm
Web
wwwwww..ppaattttoonn..ccoomm
PE-Inalp Networks Private Ltd
Old No. 14 and New No.6,
Brahadambal Road,
Nungambakkam High Road
Chennai: 600 034, India
Phone
++9911 44 44 44 55 44 990033 99 55 //66 //77
Fax
++9911 44 44 44 55 44 99.. 00 33 9944
Email
ssaa lleess @@p
paatt tt oo nn.. cc oo ..ii nn
Web
ww wwww..pp aa tt tt oonn.. cc oo..iinn
An Associate of
Electronics Co., USA
Loading...