Patton S-WTA User Manual

T
he Patton®Residential Smart WiFi
Telephone Adapter (S-WTA) delivers
connectivity with cost savings for resi-
dential and SoHo users. It combines two
integrated broadband WiFi router.
The S-WTA offers dual two-wire FXS phone
ports for standard telephones or fax
machines. With softswitch-certified SIP sig-
naling, the S-WTA provides seamless toll-
quality access to lowest cost VoIP services.
The integrated broadband router enables you
to connect to any Ethernet-based WAN such
as ADSL, cable or fiber services.
The integrated 4-port 10/100 LAN switch easily connects all of your networking devices.
The integrated 802.11 WiFi offers b, g and Super G wireless connections auto­matically for highest throughput and maxi­mum compatibility.
Wireless WPA security with NAT, firewall/ state­full packet inspection and denial-of-service support helps keep your network secure and your phone bills low.
Visit www.patton.com for more information.
Take advantage of low-cost VoIP services without sacrificing existing Internet access and connectivity. The S-WTA offers dual chan­nel VoIP, broadband routing and integrated WiFi for a complete residential TriplePlay Ready voice and data solution.
Smart Residential VoIP Analog WiFi Telephone Adapter
Model S-WTA
VoIP
Triple Play Ready
Complete Triple Play multimedia and IPTV sup­port with IGMP snooping and proxy. Integrated QoS for ensured voice, data, and multimedia quality.
Multiple Codecs
Toll quality and low-bandwidth CODECs. T.38 and fax-bypass features for solid multiuse interoperability.
Service Provider Solution
Single tightly integrated solution perfect for provider-based competitive calling and bundled data services.
Advanced Security
Integrated firewall/statefull inspection firewall, denial-of-service protection and NAT/DMZ. Wireless security offers WEP, WPA, WPA2, and
802.1x wireless security support.
SIP signaling
Deploy into any multimedia, interactive, or voice network with softswitch certified and tested call & session signaling.
Voice & Data Connectivity
2-call voice & fax FXS ports, 4-port LAN Ethernet switch, 1-port WAN Ethernet and integrated
802.11g WiFi
Special Rates Available
Call for Details
Dual FXS analog ports
802.11 b/g WiFi
Four port switch
10/100 WAN Ethernet
7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA
Phone +1-301-975-1000
Fax +1-301-869-9293
E-mail sales@patton.com
Web www.patton.com
07MSWTA-DS1
S-WTA/EUI: 2-Port FXS VoIP Telephony Adapter with Broadband Router and Integrated 802.11b/g WiFi; 100–240 VAC external power supply
Ordering Information
Remote Office/Branch Office Voice Extension and Access diagram
Meriedweg 7
CH-3172 Niederwangen
Phone +41 (31) 985 25 25
Fax +41 (31) 985 25 26
E-mail sales@inalp.com
Web www.inalp.com
Specifications
Voice Connectivity
Two FXS 2-wire loopstart, RJ-11 • 5 REN
• EuroPOTS (ETSI EG201 188) • Programmable AC impedance, feeding, & ring voltage; on-hook voltage 50Vrms nominal • Caller-ID Type-1/2 FSK and ITU V.23/Bell 202 generation.
Voice codes
G.711 A-Law/µ-Law (64kbps)
Voice Processing
G.726 ADPCM; G.723.1 (5.3 or 6.3 kbps); G.729abe • G.168 echo cancella­tion • SIPv2 • DTMF detection & genera­tion • Carrier tone detection & genera­tion • Silence suppression & comfort noise • Configurable dejitter buffer • Configurable tones (dial, ringing, busy) •
Configurable transmit packet length • RTP/RTCP (RFC 1889)
Fax and Modem Support
G.711 transparent fax • Fax over IP (FoIP) • T.38 fax relay (9.6 k, 14.4 k)
IP Services
Complete IPv4 router; DHCP server, PPPoE, NAT, DMZ with configurable SPI firewall and DoS protection • DiffServe/ToS set for queue per header bits • Pocket policing discards excess traffic • 802.1p/Q VLAN support with 4096 IDs • AES/DES/3DES encryption options
Connectivity
WAN: Single 10/100 Ethernet RJ-45 LAN: Four RJ-45 switch ports
Integrated WiFi: Dual diversity antenna.
LAN switched with full country channel selection (US, Canada, Japan, Euro) at
2.4Ghz; autorate .speed from 1–54 Mbps with Super-G burst support to 108 Mbps. Up to 23 dBm transmit power. Data rate 54 Mbps.
Voice Routing—Session Router
Local switching; Interface huntgroups • Routing criteria
Management
HTTP/CLI with local console and remote Telnet/SSH access • TFTP configuration & firmware loading • SNMP v1 agent (MIB II and private MIB) • Built-in diag­nostic tools (trace, debug)
Operating Temperature
32–104°F (0–40°C)
Humidity
5–80% (non condensing)
Power
100–240 VAC (50/60 Hz)
Power dissipation
4W
Compliance
EMC compliance: EN55022 and EN55024
• Safety compliance: EN 50950 • CE compliance • FCC Part 15 Class A
Patton is a registered trademark of Patton Electronics Company in the United States and other countries.
Loading...