Patton SmartNode PMC Reference

SmartNode Series

PMC

Hardware Reference Note

Document Number:
Part Number:

Revised:

07SNPMC-RN

April 19, 2006

132012U Rev. B

Sales Office:

Technical Support:

E-mail:

WWW:

[phone]
[phone]

[e-mail]

www.patton.com

Patton Electronics Company, Inc.

7622 Rickenbacker Drive

Gaithersburg, MD 20879 USA

tel: [phone]

fax: [phone]

support: [phone]

url: www.patton.com

e-mail: [e-mail]

Copyright Statement

Copyright © 2005–2006, Patton Electronics Company. All rights reserved.

Trademark Statement

The terms SmartWare, SmartView, and SmartNode are trademarks of Patton Electronics
Company. All other trademarks presented in this document are the property of their
respective owners.

Notices

The information contained in this document is not designed or intended for use as critical
components in human life-support systems, equipment used in hazardous environments,
or nuclear control systems. Patton Electronics Company disclaims any express or implied
warranty of fitness for such uses. The information in this document is subject to change
without notice. Patton Electronics assumes no liability for errors that may appear in this
document. Any software described in this document is furnished under license and may
be used or copied only in accordance with the terms of such license.

2

PMC Hardware Reference Note

1.0 Internal 48V Power Supply Unit for SN2300

Item

PM-48V-Int SN-PM-48V-INT 48 VDC power module for ISDN and analog lines, internal mounting in an SN2300 with

Part Number Description

IC-4BRV or IC-4FXS. For the IC-4BRV it is an option to power the ISDN phones. For the
IC-4FXS, it is required to power analog phones. Input 110–240 VAC; Output 48
VDC, 30W.

1.1 Instructions

See

Getting Started Guide

, chapter 8, “Line power module installation.”

2.0 Internal 40V Power Supply Unit for SN2400

Item

PM-40V-Int SN-PM-40V-INT 40 VDC power module for ISDN and analog lines, internal mounting in an SN2400 with

2.1 Instructions

See

Getting Started Guide

Part Number Description

IC-4BRV or IC-4FXS. For the IC-4BRV it is an option to power the ISDN phones. For the
IIC-4FXS, it is required to power analog phones. Input 110–240 VAC; Output 48
VDC, 30W.

, chapter 8, “Line power module installation.”

3.0 External 40V Power Supply Unit for SN1200 and SN1400

Item

PM-BRI-Ext
(230V)

PM-BRI-Ext
(120V)

Part Number Description

SN-PM-BRI-EXT/EUR 40 VDC power line module for ISDN and analog power line; external mounting. For

SN-PM-BRI-EXT 40 VDC power line module for ISDN and analog power line; external mounting. For

3.1 Instructions

See

Getting Started Guide

PMC Hardware Reference Note

SN1200 and SN1400. Input 230 VAC; Output 40 VDC, EU/Swiss connector.

SN1200 and SN1400. Input 120 VAC; Output 40 VDC, US connector.

, chapter 8, “Line power module installation.”

3

4.0 Interface Cards

Item

Part Number Description

IC-E1V SN-ICE1V PMC interface card for mounting in the SN2300 or SN2400 expansion slots providing one

IC-T1V SN-ICT1V PMC interface card for mounting in the SN2300 or SN2400 expansion slots providing one

IC-4BRV SN-IC4BRV PMC interface card for mounting in SN2300 or SN2400 expansion slots providing four BRI/

IC-4FXS SN-4FXS PMC interface card for mounting in SN2300 or SN2400 expansion slots providing four ana-

IC-4BRV-8VRSN-IC4BRV-8VR PMC that is an 8-channel gateway interface card for ISDN BRI/S0 with hardware bypass

IC-E1V-0 SN-ICE1V-0 PMC that is an E1 gateway interface card for ISDN PRI-circuit switching only. For use in

IC-E1V-15 SN-ICE1V-15 PMC that is a 15-channel gateway interface card with one ISDN PRI/S2m port. NT/TE con-

4.1 Instructions

In the

SmartNode 1000 and 2000 Series VoIP Media Gateways Getting Started Guide

cards descriptions” in chapter 1. Also consult chapter 9 for the installation of the card.

PRI E1 port to support 30 VoIP calls.

PRI T1 port to support 23 VoIP calls.

S0 ISDN ports to support 8 VoIP calls.
Internal Line Power Module PM-48V-Int (SN2300), PM-40V-Int (SN2400), or external

power supply PM-BRI-Ext can be used as an option to power ISDN phones.

log phone ports and eight DSP channels.
Requires Internal Line Power Module PM-48V-Int (SN2300) or PM-40V-Int (SN2400).

(emergency) relay. For use in the SN2000 series expansion slots.

SN2000 series expansion slots. NT/TE configurable.

figurable. Supports these voice codecs (G.711, G.726, G.723, G.729ab). For use in SN2000
series expansion slots.

, see the section “Interface

4

PMC Hardware Reference Note