Patton SL4050-B2-E, SL4050-B12-E User Manual
SL4050/B12/E
SmartLink Series 12-Line VoIP SIP Phone
SL4050/B2/E
SmartLink Series 2-Line VoIP SIP Phone
Quick Start Guide
Part Number:
Revised:
September 11, 2008
Important
This is a Class B device and is intended for use in a light industrial or residential environment. It is not
intended nor approved for use in an industrial environment.
The Model SL4050 phones are not approved for, and are not intended for, direct connection to the Public
Switched Telephone Network (PSTN).
07MSL4050B-QS, Rev. A
Sales Office:
Technical Support:
+1 (301) 975-1000
+1 (301) 975-1007
E-mail:
support@patton.com
WWW:
www.patton.com
WARNING
This device contains no user serviceable parts. The equipment
•
shall be returned to Patton Electronics for repairs, or repaired
by qualified service personnel.
•
The external power adapter shall be a listed Limited Power
Source. Ensure that the power cable used meets all applicable
standards for the country in which it is to be installed, and
that it is connected to a wall outlet which has earth ground.
The mains outlet that is utilized to power the devise shall be
within 10 feet (3 meters) of the device, shall be easily accessible, and protected by a circuit breaker.
Do not work on the system or connect or disconnect cables
•
during periods of lightning activity.
In accordance with the requirements of council directive 2002/96/EC on
Waste of Electrical and Electronic Equipment (WEEE), ensure that at endof-life you separate this product from other waste and scrap and deliver
to the WEEE collection system in your country for recycling.
2
SmartLink 4050 Series Quick Start Guide
1.0 Before you begin
The VoIP SIP phone can be set up using the keypad and a web browser, such as Internet Explorer. If you purchased this product to make a VoIP call, you must have either an Ethernet-based Cable or a DSL modem with an
active connection to the Internet.
1.1 Check your package contents
The following items are included in the SmartLink 4050/B12 and SmartLink 4050/B2 packaging. Contact your
supplier immediately if an item is missing.
SmartLink 4050/B12 VoIP SIP Phone SmartLink 4050/B2 VoIP SIP Phone
Ethernet cable, 5-foot (1.5-meter), Qty: 1
\
Power Adaptor
SmartLink 4050 Series Quick Start Guide
SmartLink documentation CD-ROM
Wall/Desk mounting plate
3
1.2 Overview of the SL4050/B12/E key functions
2x16 Characters LED Display
LED Indicator
M1
M2
Mute/Func
Transfer
Redial
M3
M4
M5
M6
M7
M8
M9
M10
M11
M12
Hold
SPEAKER
Voice Message
Down
Cancel/Left
Phone Book
Numeric Keypad
Phone Book
2
1
ABC3DEF
4
GHI5JKL6MNO
7
8
TUV
PQRS
0@#
.
*
OKCancel
Menu
9
WXYZ
Item Description
2 x 16 LCD Display Displays menu, time, clock, name, phone number, call status
LED Indicator Indicates that phone is currently in use or ringing
Up Cycle through the phone menu, adjust volume
3-Way Conference Enable 3-way conference
OK/Right Confirm setting change, exit menu, dial, save changes
Menu Access the phone menu
Mute/Function Disable user's microphone so that the person on the other line can not hear anything,
access the language selection, access the time format
Transfer Transfer the person you are currently having a conversation to another line
Redial/Call History Redial last dialed number, access redial menu
Hold Place the person on the other line on hold, answer call waiting
Speaker Phone Enable user to use the phone without using the handset
Voice Message Check voice message
Down Cycle through the phone menu, adjust volume
Cancel/Left Deny changes, cancel phone calls, ignore phone calls, backspace
Phone Book Access the phonebook
Numeric Keypad Input IP/phone number/alphabet characters
Local Multiline Switch to different lines
Up
3-Way Conference
OK/Right
Menu
Local Multi-Line
Mute/Function
Transfer
Redial/Call History
Hold
Speaker Phone
4
SmartLink 4050 Series Quick Start Guide
1.3 Overview of the SL4050/B2/E key functions
Voice Message
Down
Cancel/Left
Phone Book
Phone Book
OKCancel
Menu
2x16 Characters LED Display
LED Indicator
Up
3-Way Conference
OK/Right
Menu
Numeric Keypad
Item
2
1
ABC3DEF
4
GHI5JKL6MNO
7
8
TUV
PQRS
0
.
@
*
Speaker
9
WXYZ
#
Mute/Func
Transfer
Redial
Hold
Description
Mute/Function
Transfer
Redial/Call History
Hold
Speaker Phone
2 x 16 LCD Display Displays menu, time, clock, name, phone number, call status
LED Indicator Indicates that phone is currently in use or ringing
Up Cycle through the phone menu, adjust volume
3-Way Conference Enable 3-way conference
OK/Right Confirm setting change, exit menu, dial, save changes
Menu Access the phone menu
Mute/Function Disable user's microphone so that the person on the other line can not hear anything,
access the language selection, access the time format
Transfer Transfer the person you are currently having a conversation to another line
Redial/Call History Redial last dialed number, access redial menu
Hold Place the person on the other line on hold, answer call waiting
Speaker Phone Enable user to use the phone without using the handset
Voice Message Check voice message
Down Cycle through the phone menu, adjust volume
Cancel/Left Deny changes, cancel phone calls, ignore phone calls, backspace
Phone Book Access the phonebook
SmartLink 4050 Series Quick Start Guide
5
1.4 Numeric Keypad Definitions
You can use alphanumeric characters to enter details into the Phone Book, to create text and e-mail messages.
The table below shows the characters that you can enter in the different text modes.
Key
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
Text Mode
Normal (ABC) Numeric (0-9) Normal (ABC) Numeric (0-9)
1 pqrsPQRS 7
abcABC 2 tuvTUV 8
defDEF 3 wxyzWXYZ 9
ghiGHI 4 @ . _ * # ()
jklJKL 5 . *
Key
7
PQRS
8
TUV
9
WXYZ
0
@
% & + / $ ,
.
Text Mode
0
*
mnoMNO 6 #
#
6
SmartLink 4050 Series Quick Start Guide
Loading...