Patton S-DTA User Manual

T
he SmartNode 4900 is the ideal solution for service providers and enterprises
requiring high-density analog connections for converged Internet-Telephony. Call centers, multi-tenant-units and PBX/switch extensions can now access the low-cost benefits of packet voice while WAN, data and VPN features permit direct access the IP network with full upstream and DownStream QoS™.
The SN4900 supports 12 to 32 simultaneous VoIP calls over standard two-wire FXS connec­tions. The analog ports are presented on a single Amphenol telco connector for convenient wiring closet connection. Local LAN connectivity is pre­sented via dual 10/100 Ethernet ports. Traffic can be routed out either port for load-balancing and redundancy. Dual-redundant power supplies pro­tect against equipment down-time.
Seamless and secure network integration with fixed IP, DHCP or PPPoE. Complete access rout­ing features include NAT/NAPT, Firewall, DynDNS and the optional IPsec VPN feature license offer secure data.
Optional WAN uplink modules, available in V.35/X.21, T1/E1, and xDSL options, eliminate the need for extra network termination devices and extra cost.
Quality of Service (QoS) features included advanced voice prioritization and traffic manage­ment. DownStreamQoS™ ensures voice without interruptions even over best-effort internet con­nections. Packet labeling according to 802.1p, TOS and DiffServ enable integration into managed QoS networks.
Integrated GUI and Command Line, front panel status and call load indicators and a full suite of management inter­faces ensure efficient setup, continuous trouble­free operation and cost-effective deployment.
Visit www
.patton.com for more information.
The Patton S-DTA brings all advantages of VoIP to ISDN users. It connects multiple terminals to its BRI So bus, and converts 2 concurrent voice or fax calls to SIP or H.323 —at an incredibly low price.
Smart-DTA Residential
Digital Telephone Adapter
Model S-DTA
VoIP
Special Rates Available
Call for Details
Full SIP and T.38 support
Complete range of industry standard signaling protocols supported: SIPv2, H.323v4, MGCP/IUA, ISDN, BRI, T.38, fax and modem bypass, DTMF relay.
Integrated Management and Provisioning
Web GUI for easy end-user setup, fully auto­mated provisioning system and SNMP manage­ment for mass deployment.
Outstanding Interoperability
Interoperable for voice and fax calls with a wide variety of ISDN terminals, PBXs, as well as SIP and H.323 soft switches and application servers.
Transparent Telephony Features
Preserves ISDN features like caller ID and name (CLIP/CLIR), call transfer, hold, waiting, charg­ing information (AOC) and much more.
Instant ISDN to VoIP Connectivity
Provides one internally powered So bus for up to 8 terminals. Simultaneously converts 2 voice and fax calls to VoIP.
100–240 VAC
external power supply
Front panel indicators
show system status
at-a-glance
Proven
Patton design,
Patton supported
ISDN TE
BRI/So port
10/100Base-T
Ethernet LAN port
07MSDTA-DS4
Patton is a registered trademark and the terms SmartNode, DownStreamQoS, and SessionRouter are trademarks of Patton Electronics Company in the United States and other countries.
7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA
Phone +1-301-975-1000
Fax +1-301-869-9293
E-mail sales@patton.com
Web www.patton.com
Meriedweg 7
CH-3172 Niederwangen
Phone +41 (31) 985 25 25
Fax +41 (31) 985 25 26
E-mail sales@inalp.com
Web www.inalp.com
* Specifications subject to change without notice.
S-DTA/P/EUI: ISDN VoIP adapter, 1x BRI/So, 2 voice/fax calls, 1x 10/100 Ethernet, external UI power (100–240 VAC)
Ordering Information
Specifications*
WAN Connectivity
10/100Base-T Ethernet WAN • Auto­MDI-X • DHCP Client • PPPoE Client (multi-session) • SNTP • IP Multi-Netting
IP Quality of Service
IEEE 802.1p, TOS, DiffServ Labeling • IEEE 802.1Q, VLAN Tag insertion/dele­tion (4,096 VLANs)
Management
Web-based GUI • Fully documented CLI
• Telnet and HTTP access • TFTP con­figuration up- and download • TFTP firmware upgrade • SNMPv1 agent, MIB II and enterprise MIB • Built-in diagnos­tic tools • Auto-Provisioning— Configuration and Firmware
Fax and Modem Support
T.38 fax over IP • Fax relay and bypass
• Modem bypass
ISDN Specification
1 port Euro-ISDN BRI/So RJ-45, NT • DSS-1, Q.921, Q.931 • Point-to-point & point-to-multipoint • Line power for ISDN terminals
Voice Signaling
SIPv2 • H.323v4 • MGCP/IUA • SIP call transfer, redirect • Overlap or en-bloc dialing • DTMF in-band & out-of-band • Configurable call progress tones
Call Routing & Services: Regular expression number matching • Regular
expression number manipulation • Least Cost Routing • Number blocking • Short-Dialing • Digit collection • Distribution-Groups & Hunt-Groups • 2nd call offering
Voice Processing
G.723.1 (5.3/6.3 kbps) • G.729, G.729a, G.729ab (8 kbps) • G.726 ADPCM (16, 24, 32, 40 kbps) • G.168 echo can­cellation (25 ms) • Transparent ISDN data • Silence suppression and comfort noise • Adaptive and configurable dejit­ter buffer • Configurable packet length
Dimensions
4.2W x 1.5H x 5.0D in. (10.6W x 3.9H x 12.7D cm)
Weight
< 15.9 oz (450 g)
Power Consumption
< 4W
Operating Temperature
32–104°F (0–40°C)
Humidity
Up to 90%, non condensing
Compliance
FCC Part 15 Class B (US EMC) • CE per RTTE 99/5/EC (EMC and LVD) • Safety—EN60950 • TBR-3 (ISDN BRI/So)
Network Integration
Patton’s Smart Digital Telephony Adapter provides seamless access to Internet telephony services for ISDN terminals. The S-DTA connects to any LAN or broadband access provider via modem.
S-Bus
• • •
Up to 8 ISDN phones
Home LAN
PC
Internet
ISDN Home User
S-DTA
Loading...