Patton 3096RC User Manual

Flexible WAN Egress

Your choice of 4/8/12/16 T1/E1 module, or use
the STM-1 uplink for up to 63 E1s over fiber or
copper.

Complete Alarm Facilities

Configurable alarm reporting via remote SNMP
traps, front panel LEDs, 3-contact relay, and
NMS.

Built-in TimeSlot DACS

Connect any-to-any mapping with its powerful
built-in grooming capabilities.

The 3096RC T-DAC connects 16 G.SHDSL users and supports nx64 kbps access to 2.3 Mbps. Offering
high density with standards-based interoperability, the 3096RC delivers access for the next generation.

16-Port G.SHDSL TDM
Digital Access Concentrator

ForeFront

™

AIS

Model 3096RC

D

SL delivers the reach-and-range, but
the infrastructures delivering those

services have typically lacked integra­tion, often requiring a rack full of specialized
equipment. Now, Patton has combined
G.SHDSL ports, DACS, and WAN functions
into a powerful system operating on Patton’s
ForeFront Access Platform.

The Model 3096RC TDM-Digital Access
Concentrator, or

T-DAC,

links 8, 12, or 16
G.SHDSL circuits to multiple WAN uplink
modules and offers completely flexible any­to-any DS0 grooming. Each 2.3-Mbps port
offers user-selectable nx64 (n=1..36) data
rates. With its built-in cross-connect, each
data channel, or channel group, can be
multiplexed onto any uplink or DSL port—
even to ports on other 3096RC blades in

the same chassis. The entire system is eas­ily manageable through an integrated
SNMP/HTTP-based NMS.

Use the T-DAC in any Patton 2U, 4U, or 6U
Forefront Access System and scale-up den­sity while reducing costs! Fully redundant
power and integrated cooling enable these
lightweight chassis to grow while accepting
new technologies.

Harness the explosive growth of DSL with a
tightly integrated, cost-effective solution to
aggregate high-speed traffic while gaining
flexibility and protecting your investment.
Choose the 3096RC for your next network
rollout.

Visit www

.patton.com for more information.

Up to 16 Ports per ForeFront Card

Get high density per card and lower your cost
per port. Simply scale with more cards.

nx64 kbps Speeds to 2.3-Mbps

Get speGet speed and distance of up to 30,000
feet (9.4 km) with nx64 kbps (n=1..36) on each
port.

SNMP/HTTP Network Management

Configure the Model 3096RC and the remote
CPE modems from any location in the world.

Model 3096RC

T-DAC

Provides up to 16 G.SHDSL

links at rates of nx64 kbps

to 2.3 Mbps.

3096RCT/0E

T1/E1 rear access card

provides any-to-any DS0

connectivity to the Patton

Access Node.

3096RCT/4E

3096RCT/8E
3096RCT/12E
3096RCT/16E

T1/E1 rear access cards

provide any-to-any

DS0 connectivity to the

Patton Access Node.

Additionally, it provides 4,

8, 12, or 16 E1 WAN

egress ports.

Special Rates Available

Call for Details

7622 Rickenbacker Drive

Gaithersburg, MD 20879 USA

Phone [phone]

Fax [phone]

E-mail [e-mail]

Web www.patton.com

07MD3096-DS7

ForeFront G.SHDSL System Configurations

Patton is a registered trademark and IPLink is a trademark of Patton Electronics Company in the
United States and other countries.

Specifications

Dual-redundant

power supplies

The ForeFront FullPipe—configured with 3096RC T­DACs—provides up to 96 G.SHDSL links in a 4U
chassis. E1 or STM-1 interface options make data
network integration a snap. Combined with Patton’s
3086 CPE, it provides the complete solution.

ForeFront DSL

Access Cards

Up to 96

G.SHDSL links

using the FullPipe

Pass TDM and routed links

simultaneously through each CPE

ForeFront FullPipe™

ForeFront Xtreme™

4U-high, 8-slot cPCI­based access node

6U-high, 17-slot cPCI­based access node

n

x E1 or STM-1 Egress

ForeFront FullPipe™

4U, 8-slot platform

TDM/Data Network

ForeFront Switchblade™

ForeFront HalfPipe™

2U-high, 4-slot cPCI­based access node

ITU-T G.991.2 G.SHDSL Annex A and Annex B.
G.994.1 G.hs nx64 kbps data rates up to 2.3 Mbps (n-

1..36) over 2 wires Full duplex, symmetrical TC-PAM
encoding
30,000 feet (9.4 km) at 192 kbps, 16,500 feet (5 km)
at 2.3 Mbps
Up to 16 ports presented on a 50-pin Telco connector
Uplink module options include 4, 8, 12, or 16 T1/E1
ports
Single 10/100Base-T (RJ-45 connector)
Patton 3201, 3086, and other standards-based
G.SHDSL modems
Internal, Network (from T1/E1 WAN port) or system
chassis
Provides clocking to the remote NTUs/Modems
LEDs for power, CPU, system, Ethernet, clock source,
alarms, test mode, DSL, and WAN

HTTP, SNMP, TELNET Ethernet, RS-232 Console Port,
SYSLOG Client, Remote Software Upgrade via FTP
Configurable alarms; Remote SNMP Traps; Front Panel
LEDs; 3-Contact Relay (3-pin terminal block)
Safety: UL/CSA per UL1950 (METS) Canadian cMET and
CS-03. EMC Directive 89/336/EEC, Low-Voltage
Directive 73/23/EEC (EN 60950), FCC Part 15, CE Mark,
CTR12, CTR13 FCC Part 68.
Operating temperature: 14 to 140°F (-10 to 60°C);
Humidity: 5 to 90%, non-condensing
Front blade: 0.75 H x 10.5 W x 6.3 D in.

(1.9 H x 26.7 W x 16.0 D cm)

Rear blade: 0.75 H x 10.5 W x 3.15 D in.

(1.9 H x 26.7 W x 8.0 D cm)

G.SHDSL

G.SHDSL Distance

G.SHDSL connection
Rear Modules

Ethernet Port
G.SHDSL Modems

WAN Clocking

G.SHDSL Clocking
Front Panel Indicators

Management
Services
Alarm Reporting

Compliance

Environment

Dimensions