Patton 3086FR User Manual

1

GoC

ard

Product Model 3086FR
Product Name 3086FR Frame Relay/PPP over ATM IAD

Who is the customer for the 3086FR IAD?

The Patton Model 3086FR IAD combines the latest advances in high speed DSL technology with a potent IP, Frame
Relay (FR), PPP and ATM core enabling seamless connection of ANY Frame Relay devices and LAN services to high­speed ATM networks.
Based on European Telecommunications
Standardization Institute (ETSI) and International
Telecommunications Union (ITU) G.SHDSL
standards – G.991.2, the Patton 3086FR
ipRocketLink enables 2.3 Mbps symmetric nx64
(n=1..36) data rates over a single pair of wires while
combining standards based ATM transmission with
Synchronous-Serial, Ethernet, and high speed IP
routing…all in one compact package. The 3086FR
can be connected to either third party DSLAMs or in
back to back applications over the DSL port.

Target customers for this product are:
Carriers & Enterprise : Carriers and enterprises connecting FR /PPP- based sites over DSL links running ATM are

key targets for the Model 3086FR IAD. Enterprise customers can also exploit the speed and abundant IP features
included with the 3086FR to deliver routed or bridged branch Internet services. Both FR conversion to ATM as well as
multi-protocol encapsulation and routing from any-to-any port, can be used concurrently.

Internet Service Providers : In addition to FR/PPP to ATM conversion, the 3086FR offers an IP rich feature set that
includes RIP, RIPv2, DHCP, NAT/NAPT, DNS, Firewall/IDS, and flexible Layer 2 multi-protocol encapsulation.
Armed with these features, the 3086FR IAD is an extremely attractive proposition as a costumer premises router in
Business Internet services applications.

For other DSL and router options consider Patton’s complete line of IP and DSL products including:

T1/E1/X.21/V.35 IPLink 2603, 2621, 2635
G.SHDSL 3096RC, 3224, 3201, 3241, 3086
VDSL 1058, 1058RC, 1068, 1068RC
mDSL 3095, 1088, 1095, 1095RC
iDSL 3196RC, 3092, 1082, 1092A, 1092ARC

2

ard

What are the Key Features and Benefits of the Model 3086FR?

Key Features Benefit

Supports for both FRF.5 and FRF.8 Interworking Agreements for non-

Simultaneous Frame Relay to ATM

conversion, routing and multi -

protocol encapsulation

Advanced IP routing features

Dual Simultaneous

User Interface Ports

FlexIP™ technology eliminates the

need for multiple pieces of

equipment at the customer premise

to provide multiple service

User selectable Standards- based

G.SHDSL

High- speed 2-wire DSL from 64kbps

to 2.3 Mbps

Long Reach DSL

Auto- sensing 10 or 100BaseT and

full or half- duplex Ethernet.

10/100 Ethernet with

MDI- X

Flexible management options

Convenient desktop modem

Front mounted LED’s

routed FR to ATM conversion. Use the IP rout er to route from any-to­any port using Ethernet, PPP, FR, or ATM encapsulation.
Offers both services simultaneously!

Powerful features include IP routing, NAT/NAPT, DNS, Firewall/IDS,
and DHCP making shared Internet connectivity simple, secure and
easy.

Customers have a 10/100 Ethernet port and either a serial or T1/E1
port for simultaneous transmission over the same DSL line.
Bandwidth for each port is user configurable. Each port can be
shutdown if required.

Patton’s FlexIP™ technology transports simultaneously the serial
frame relay data from any serial device and the IP data from the
3086’s Ethernet port over a single DSL connection. For simultaneous
serial and IP data, the 3086FR IAD operates in “split DSL bandwidth
mode,” so it is sharing one DSL connection for both types of data.

The DSL port meets ITU-T standard G.991.2 including Annex A and
Annex B operation and supports G.Handshaking (G.994.1).

Support for nx64 kbps for n = 1 to 36 and ix8 kbps for I = 0 to 7 per
G.991.2.

Using just 2 wires of ordinary twisted pair telephone wire, the
3086FR can reach distances greater than 30,000 ft (9 km).

No configuration necessary, just Plug your Ethernet connections in
and Play.

Eliminate the need for crossover Ethernet cables with the built-in
MDI-X crossover switch. Easily connect to any computer or
hub/switch with any available Ethernet cable.

A built in Web/SNMP management system allows the operator to
configure the 3086FR locally and remotely, manage each DSL link,
and perform initial test loops all with just a web browser. Setup is
likewise a snap with the command line interface (CLI) accessible via
either the VT-100 console port or a telnet session. Manage the unit
from anywhere in the world through an IP network.

Patton packs all these features including an internal power supply in
a small compact package that makes this product easy to fit into
almost all customer environments.

Front mounted LED’s provide a quick look at the 3086FR status.
LED’s provide information on Power, DSL port status, WAN status and
Ethernet status.

GoC

3

GoC

ard

Applications

The abundance of networking features in the 3086FR enables a variety of applications.

• Service providers can use the 3086FR to provide frame relay service over existing DSLAM networks using FRF.5

and FRF.8 Frame Relay to ATM Interworking. Frame Relay data from the Serial port is either converted or
encapsulated into ATM cells and sent over the DSL link. Frame Relay DLCIs are mapped to ATM VPI/VCIs.

Frame

Frame

Frame

Relay

Relay

Relay

ATM

ATMATM

DSLAM

DSLAMDSLAM

3086FR

3086FR

• Service providers can use the 3086FR to provide LAN extension, Internet Access, and other value added router

services. IP Routing or Ethernet bridging is concurrently supported over any PPP, FR or ATM link. Traffic can be
sent out through the serial port, the 10/100 Ethernet port, and the G.SHDSL port at the same time making the
3086FR a versatile three port router. The 3086FR additionally boasts a variety of value added networking and
routing features including Intrusion Detection System (IDS), DHCP, NAT/PAT, and IP address and port filtering.

Frame

Frame

Relay

Relay

Router

Router

FRAD

FRAD

Frame

WWW/IP

WWW/IPWWW/IP

ATM

ATMATM

DSLAM

DSLAMDSLAM

3086FR

3086FR

Frame

Relay

Relay

Ethernet

Ethernet

Router

Router

FRAD

FRAD

• Service providers can offer multiple simultaneous services using the 3086FR. Map all IP traffic to one VPI/VCI in

order to offer Internet or LAN extension service and map multiple frame relay DLCIs to unique ATM VPI/VCIs to
provide end-to-end Frame Relay service.

Frame

Frame

Frame

Relay

Relay

Relay

WWW/IP

WWW/IPWWW/IP

ATM

ATMATM

DSLAM

DSLAMDSLAM

3086FR

3086FR

Frame

Frame

Relay

Relay

Ethernet

Ethernet

Router

Router

FRAD

FRAD

4

GoC

ard

Included Parts

The Model 3086FR comes with the following items:

One 3086FR IAD
Software including operating system and drivers, IP routing engine, and frame relay to ATM conversion engine

An RJ-45−to−RJ-45 cable for use with the console and Ethernet ports
A DB9-RJ45 (EIA-561) adapter for connecting a PC’s serial port to the IAD’s console port
Power supply as specified
CD-ROM containing User Manual

• NOTE: The 3086FR Internal UI power supply uses the new style two-pronged power

cord. This power cord is identified with a -2 appended to the standard Patton power
cord part number. For Example: A standard three-pronged (IEC320) Euro Power cord
would have the catalog number of 0805EUR. The NEW 2-pronged power cord is a
0805EUR-2. The external UI power supply still uses the standard three-pronged
IEC320 style power cord.

• NOTE: Country specific power cords are also specified separately.

Shipping/Export Information

ECCN export number: 8517.50.1000
Country of origin: United States of America, NAFTA
Total weight boxed: 3.1 lbs. (1.4 kg)
Individual unit: 1.15 lbs. (0.52 kg)

MTBF/Repair Information

MTBF: 3086FR/RIC/UI: 58,000 hours 3086FR/RID/UI: 66,000 hours

3086FR/RIK/UI: 57,500 hours 3086FR/RIT/UI: 57,500 hours

Calculation based on MIL-HDBK-217F, Notice 2 - "Parts Count Reliability Prediction"

Mean time to repair: < 2 hours Warranty: 1-year parts and labor.
Out of Warranty Repair Rate: Contact Tech Support for details: [phone] or [e-mail]

5

ard

Physical Specifications

Dimensions: 7.25” W x 1.5” H x 6.5” D in. (18.4 cm W x 3.8 cm H x 16.5 cm D)
Color: Case: black.

Front overlay: black with white lettering.
Rear overlay: black with white lettering.

Case material: Plastic, Fire retardant (V0 rating or Better)

Environmental

Operating Temp: 32 to 122°F (0 to 50°C)
Storage Temp: -13 to 185°F (-25 to +85°C)
Relative Humidity: 5 to 95% RH, non-condensing

GoC

Altitude: 0–15,000 feet (4,572 meters)
Ventilation requirements: None.

Approvals

Safety Emissions Telecommunications

Patton Internal Safety and UL/CSA
testing per: UL1950 (MET), Canadian
cMET

ESD EN61000-4-2
EN60950

Australia Specific Approvals:

TS-001
TS016 (E1 Telecom) – 3086FR/RIK only.
AZ/NZS 3260 Safety
AZ/NZS 35-48 EMC

RTTE 99/5/EC
FCC Part 15 Sub Part B, Class A

FCC Part 68
CE Mark
RTTE 99/5/EC
Canadian CS-03
CTR12 (RIK versions only)
CTR13 (RIK versions only)

6

ard

Power Supply

Internal: UI (100-240VAC, 50-60Hz), 2-pronged AC power connector
DC (36-60VDC) 3 position - Clamp type terminal Block

External: UI (100-240VAC, 50-60Hz)

2.5mm barrel type Conn. Output: 5 VDC, 2A (Center pin is +)

DC (36-60VDC) 3 position - Clamp type terminal block input:

2.5mm barrel type Conn. Output: 5 VDC, 2A(Center pin is +)

GoC