Patton 2960 RAS User Manual
he Patton 2960 RAS is an ideal solution for the established Internet
Service Provider that is expanding into a new calling area. By integrating capabilities into our 2960 Remote Access Server, the ISP
lowers expansion costs and produces revenue immediately.
The 2960 RAS integrates up to 60 analog and digital modems, RADIUS
Accounting and Authentication Client, a 10/100 Ethernet port, IP Routing,
Frame Relay forwarding, and four built-in E1/T1 CSU/DSUs. It connects 16 to
60 dial-in-modems with V.92, V.44, V.90, K56Flex, V.34+ or ISDN users to the
Internet, IP LANs, or Corporate Intranets. Load-sharing dual-redundant power
supplies and integrated Web-based SNMP/HTTP management system capabilities make our 2960 RAS the most reliable and easiest to use RAS in the business! Need additional details? Visit us at www.patton.com.
16, 24, 30, 48, or 60 ports in a 1U-High Platform
Dynamic Analog/Digital Modems
Model 2960 uses the latest technology
to achieve the highest densities
All modems (V.92, V.44, V.90, K56Flex™, V.34+ and ISDN)
are dynamically supported on dedicated DSPs
Frame Relay & PPP Network Uplinks
Dual Network uplinks to a FR switch or IP router
for high speed trunking
SNMP/HTTP Network Management
Use a standard Web Browser, HP OpenView™ or
simple PCs to configure and manage the 2960
MultiLink and Multichassis Support
Combine multiple dial-in sessions, even across
boxes, to deliver the highest performance
Dial-out/Callback/Dial-on-demand
Use the Model 2960 as a dial-out modem pool
and support advanced dial-out applications
Dual-Redundant Power Supplies
Provide non-stop access with our high MTBF 2960.
No fans–Convection Cooled and stackable
NETLINK™ ACCESS PRODUCTS
The Patton 2960 Remote Access Server provides 16 to 60 dial-up ports
each supporting V.92, V.90, V.44, K56Flex™, V.34+, and ISDN connections.
Remote Access Server
Patton 2960 Dual T1/E1/PRI RAS
T
RAS
V.92/V.90
K56Flex
™
V.34+
ISDN SOHO Router
Dial-Up Users
2960 Remote Access Server Configuration in a Remote POP
Internet & WWW
• The 2960 RAS supports over 20
signaling methods and PSTN/ISDN
switch types and 16/24/30/48/60
analog or digital modems
• The model 2960 integrates standard
CSU/DSUs and a 10/100 Ethernet port
with Frame Relay and PPP/HDLC
protocol support
WWW
Model 2960 RAS
PSTN/ISDN
10/100 Ethernet Port
Two Frame Relay/PPP Uplink Ports
with integrated T1 CSU/DSU and E1 NTU
24/30 Calls on each
T1/PRI and E1/PRI Access Port
Special Rates Available
Call for Details
7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA
Phone +1-301/975-1000
Fax +1-301/869-9293
E-mail marketing@patton.com
URL www.patton.com
07MD2960-DS6
Lucent
MAX 4000
Lucent
PM3
2960 Competitive Positioning
Number of V.90/V.92 calls
T1/E1/PRI ports
Backhaul/Uplink ports
Self Cooling
100Base-T Ethernet ports
Built-in HTTP/WEB Mgmt
Dual Redundant Power
Tech Support
Software Upgrades
Rack Height
Base Features
Key Selling Points
48/60
(NO V.92)
2
2
NO
NO
NO
Add’l $$$
Add’l $$$
Add’l $$$
2U
48/60
(NO V.92)
2
Add’l $$$
NO
NO
NO
Add’l $$$
Add’l $$$
Add’l $$$
2U
Patton
2960
16/24/30/48/60
2
2
YES
YES
YES
YES
FREE
FREE
1U
From HTTP management to dual-redundant power supplies to
FR/PPP uplink integration, the NetLink Model 2960 provides
an all-in-one package for the expanding ISP. Featuring:
Integrated T1/E1 uplink ports with Frame Relay and PPP.
Convection-cooled system. There are no fans or moving
parts to fail.
The lowest cost-of-ownership for an ISP or Telco building
a Remote POP for 16/24/30/48/60 ports.
The Model 2960 requires 1/2 the space of existing RAS
solutions. With greater reliability and a smaller package than
any of its competitors, the Model 2960 is the cost leader in
the industry.
Why use
our Model 2960 RAS?
■
■
■
■
■
■
NetLink RAS Product Family
V.92, V.44, V.90, K56Flex™, V.34 Annex 12, V.34, V.32bis, V.32, V.23, V.22, V.22bis, V.21, Bell 212A, Bell 202, Bell 103, EIA-PN-2330, V.8, V.8bis, Sync/Async receiver/transmitter for
V.14, V.42/V.42bis error correction & compression.
E1 Primary Rate interface (Q.931), E1 MFR2 (R2), T1 Primary Rate Interface, T1 Robbed bit with Loop/Ground Start or E&M Wink, E&M Immed, Taiwan R1 and Drop & Insert
HTTP, SNMP, TELNET Dial-in and Ethernet or RS-232 console port, SYSLOG client, Remote software upgrade via FTP, User configurable login prompts and banners
RADIUS, PAP/CHAP, Username/Password, and Static Users Database (111 Entries)
Achieved through Flash upgrades via FTP (upgrades available from www.patton.com)
TCP/IP suite with extensive protocol statistics • ICMP/TFTP/FTP/RLOGIN/TELNET • Ethernet ARP, Proxy ARP and RARP protocols • Point-to-Point Protocol (PPP) • SLIP protocol • Van
Jacobson TCP header compression PPP address and protocol compression • RADIUS authentication and accounting, with support for primary and secondary servers • RIP and RIPv2 •
User configurable static routes • MultiLink PPP • Multi-chassis MultiLink • Layer 3 and Layer 4 IP Filtering • NFAS • DNIS
Dial-out with support for multi-link PPP • Single-line call-back • Remote authentication using PAP and CHAP and session time
Model Number
Number of Connections
Power Supplies
Ethernet Ports
WAN Ports
Modem Modulations
PSTN Signaling
Management Services
Authentication
Software Upgrades
Protoc ol Services
Dial-out Services
Model 2960 Model 2996 Model 3120
Dual Redundant (Fixed) AC
One 10/100Base-T
Four
Dual-Redundant (Hot Swap) AC or DC
Two 10/100Base-T
Four
3120/48 3120/60 3120/96 3120/120
2960/16 2960/24 2960/30 2960/48 2960/60
Dual Redundant (Fixed) AC
One 10/100Base-T
Four
2996/96 2996/120
96/120 Calls—4 T1’s or 4 E1’s
48 60 96 120
16 24 30 48 60
Loading...