Patton 2701R User Manual
O
ne of the smallest and most economical NTUs available, the Model
2701R is designed with features
usually found in more expensive units:
flexible clocking modes, AMI/HDB3 coding, V.52/V.54 diagnostics, and userselectable nx64 kbps data rates.
The Model 2701R series terminates
E1/FE1 services for all nx64 kbps to
2.048 Mbps rates and connects to a
router, FRAD, CODEC, or LAN with V.35,
X.21, EIA-530, or 10Base-T interfaces.
Front facing LEDs and easily accessible
switches allow for instant diagnostics
and service monitoring. Convenient DIP
switches support quick and concise
configuration of your E1 termination.
AC or DC power options make installing
the Model 2701R into your network
infrastructure a
snap
.
The wide variety of features, compact
size, and low price make Patton’s
Ruggedized E1 NTUs the right solution
for your next network challenge.
Visit www.patton.com for more informa-
tion.
The Patton Model 2701R NTU terminates E1 and Fractional E1 services and provides conversion to V.35, X.21, EIA530 and 10Base-T Ethernet.
Ruggedized NTU
Model 2701R
NetLink™ Access Products
Wall or DIN Rail Mount
Easily installs into any environment
Connect at Any Speed
Select nx64 data channels, or 2-Mbps Clear
Channel
Eliminate Routers
Bridge Ethernet across the WAN using industry
standard PPP/BCP
Connect to Any Terminal Interface
Smooth clock V.35, X.21, EIA-530, and 10Base-T
Ethernet interfaces
Standalone or Rack Solutions
Available in desktop and high density SNMP
managed racks
Power It Anywhere
Universal input AC (100–240V) and -48 VDC
power supply options
Special Rates Available
Call for Details
Standalone and 2U-high rack card versions
are available with the same features as the
ruggedized 2701R.
Model 2701
Model 2701RC
7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA
Phone +1-301-975-1000
Fax +1-301-869-9293
E-mail sales@patton.com
Web www.patton.com
07MD2701R-DS2
Meriedweg 7
CH-3172 Niederwangen
Phone +41 (31) 985 25 25
Fax +41 (31) 985 25 26
E-mail sales@inalp.com
Web www.inalp.com
Patton is a registered trademark, and NetLink is a trademark of Patton Electronics Company in
the United States and other countries.
NetLink™ 2701R Product Family
Why use our E1 NTUs?
E1 service flexibility. Pay only for the data
you use.
Flexible interface options mean the Model 2701R
will easily connect to your network
Diagnose problems on the spot, thereby ensuring
network reliability and up-time
Higher density in smaller spaces with command and
control over your network
Universal power supply options make installing the
Model 2701R into your network infrastructure a
snap!
The model 2701’s price,
variety of interfaces and
features make it the right
solution for your E1 network!
Supports full 2 Mbps
or nx64 kbps
V.35, X.21, EIA-530, or
10Base-T Interfaces
Built-in V.54/V.52-compliant diagnostics. Responds to CO initiated loops
Available in DIN, wall mount, desktop,
or high density SNMP managed racks
100–240 VAC or –48 VDC
power options
Key Features Benefits/Advantages
DCE Interface
Network Interface
Power Supplies
Dimensions
Weight
Line Rate
Line Coding
Line Framing
DTE Rates
Clocking
Diagnostics
Range
Compliance
Temperature/Humidity
2.048 Mbps (E1 and Fractional E1)
AMI or HDB3
G.703 (unframed) or G.704/G.732 (framed)
nx64 kbps (V.35, EIA-530, X.21/V.11); nx64 kbps to 10Base-T (10 Mbps)
Smooth clocking—Internal, External or Receive Recover
Local/Remote Loop, 511 and 511E BERT
1.6 km
CE Mark, G.703, G.704, G.723, G.832, CTR-12 and CTR-13; 1500 VRMS transformer isolation
32 to 122°F (0 to 50°C)/5 to 90% relative humidity, non-condensing
UI (100–240 VAC) or -48 VDC
1.50 H x 4.17 W x 5.84 D inch
(3.84 H x 10.6 W x 14.84 D cm)
1.0 lbs (0.45 kg)
AC or DC rack power supplies
3.0 H x 0.83 W x 7.84 D inch
(7.6 H x 2.1 W x 19.0 D cm)
0.31 lbs (0.14 kg)
V.35
RJ-48C RJ-48C & Dual BNC RJ-48C Dual BNC
EIA-530 X.21 X.21 X.21 10Base-T
2701R/C
2701/C
2701R
2701
2701RC
2701R/B
2701/B
2701R/D
2701/D
2701R/I
2701/I
V.35 EIA-530 10Base-T
2701RC/A/I
2701RC/B/B 2701RC/D/V
2701RC/C/I
2701RC/D/D
RJ-48C
Loading...