Patton 2040 User Manual

.35/X.21/RS-530 to HSSI Interf

VV.35/X.21/RS-530 to HSSI Interf

ace Convverer

ace Con

The Patton 2040 Series

ter

ter

The Patton 2040 Series interface con-
verter allows a switch or router with a
HSSI interface (such as the Ascend GRF
IP Switch) to connect directly to a CSU,
bridge, router, multiplexer or other device
with a V.35, X.21 or RS-530 interface.
Supporting synchronous data rates up to
10 Mbps, the Patton 2040 Series is trans­parent to protocol and passes all data

Patton 2040 Series

Interface Converter

T1 CSU

V.35 Port (X.21 &

RS-530 converters

also available)

Integral 6 ft cable

signals, all control signals, and all HSSI
clocking paths (except smooth to gapped
clock). Both local line and remote line
loopbacks are supported. All three mod­els in the Patton 2040 Series are avail­able in two versions: DCE-to-DTE or
DTE-to-DCE. The Patton 2040 Series is
externally AC powered, and is supplied
with an integral 6ft (1.8 m) cable.

HSSI Port

Ascend GRF IP Switch

Continued...

Patton Electronics Company • 7622 Rickenbacker Dr. • Gaithersburg, MD • 20879

Phone: [phone] • Fax: [phone] • E-mail: [e-mail] • WWW: http://www.patton.com

F

EATURES

F

EATURES

©

Bi-Directional HSSI (High Speed Serial

Interface) Conversion

©

Three Models to Choose From:

Patton 2040 - V.35 to HSSI
Patton 2041 - X.21 to HSSI (pictured)
Patton 2042 - RS-530 to HSSI

©

Supports Synchronous Data Rates

up to 10 Mbps

©

Transparent to Protocol–Passes Data,

Control Lines and Two Loopback Modes

©

Integral 6 ft (1.8 m) Cable

©

Two Versions: DCE-to-DTE and

DTE-to-DCE

©

External AC Power Supply

S

PECIFICATIONS

S

PECIFICATIONS

Data Format: Synchronous
Standards: Converts CCITT V.35, CCITTX.21 or

EIA-530 to HSSI (ANSI/TIA/EIA-613, December,
1993 & ANSI/TIA/EIA-613, November, 1993)

Data Rate: 0 - 10 Mbps
Clocking: All clocking modes supported except con-

version from smooth to gapped clock

Loopbacks: Local line and remote line supported;

Local DTE not available

Interfaces: V.35, X.21 or RS-530 DTE to HSSI

O

RDERINGINFO

O

RDERINGINFO

2040MT-MC/UI (M/34 male, V.35 DTE configuration) to (HD-50 male, HSSI DCE configuration),

2040MC-MT/UI (M/34 male, V.35 DCE configuration) to (HD-50 male, HSSI DTE configuration),

2041FT-MC/UI (DB-15 female, X.21 DTE configuration) to (HD-50 male, HSSI DCE configuration),

2041FC-MT/UI (DB-15 female, X.21 DCE configuration) to (HD-50 male, HSSI DTE configuration),

2042MT-MC/UI (DB-25 male, RS-530 DTE configuration) to (HD-50 male, HSSI DCE configuration),

2042MC-MT/UI (DB-25 male, RS-530 DCE configuration) to (HD-50 male, HSSI DTE configuration),

Universal Input Power Supply (100 - 240VAC)

Universal Input Power Supply (100 - 240VAC)

Universal Input Power Supply (100 - 240VAC)

Universal Input Power Supply (100 - 240VAC)

Universal Input Power Supply (100 - 240VAC)

Universal Input Power Supply (100 - 240VAC)

DCE; V.35 X.21 or RS-530 DCE to HSSI DTE
(see ordering information)

Connectors: Male HD/Slimline 50-pin (HSSI);

Male M/34 (V.35), Female DB-15 (X.21) or Male
DB-25 (RS-530)

Cable: 6 ft (1.8 m)
Temperature Range: 32-122°F (0-50°C)
Altitude: 0-15,000 feet (4.5Km)
Humidity: Up to 95% non-condensing
Power Supply: External AC transformer,

100-240VAC (Universal Input), IEC-320 connector

Dimensions:

(12.45 cm x 5.08 cm x 1.85 cm);

Patton 2042

5.08 cm x 1.85 cm)

Patton 2040 Series

V.35/X.21/RS-530-to-HSSI Converters

Patton 2040

- 3.40” x 2.00” x 0.73” (8.63 cm x

- 4.90” x 2.00” x 0.73”

Patton 2041

and

7622 Rickenbacker Dr., Gaithersburg, MD 20879
Phone: [phone] • Fax: [phone] • E-mail: [e-mail] • WWW: http://www.patton.com