Our miniature rack cards have a unique design: front function cards and rear interface cards that connect together on
a midplane power bus. This configuration allows interface
cables to remain connected while function cards are hotswapped (and vice versa). Each mini-rack and ClusterBox
has a power supply that services all cards in the chassis.
You can configure the mini-rack and ClusterBoxes with a
variety of function
cards (short-range
modems or
SRMs
,
fiber modems, converters, etc.) and you can mix-and-match function cards with
different interface cards.
16 ports fit a wide variety of Patton products—from
CSU/DSUs to short-range modems to converters.
Mini-Rack System and ClusterBoxes
™
Models 1000R16, 1000CU2, 1000CU4, & 1000CU8
Multiple datacom devices fit side-by-side in our mini-rack and ultra-compact ClusterBoxes!
FEATURES & BENEFITS
Multi-function—Supports interface converters, CSUs,
fiber modems and virtually all Patton mini-modems.
Hot-swappable—Replace function cards
without turning
off the power
.
Reliable—Our distributed power system gives each rack
card its own power supply circuit
Flexible—Convenient rack mount and ClusterBox ver-
sions are available to meet your needs
Choose from a variety of rear interfaces: DB-25, RJ-11,
RJ-45, UD-26, etc.
Async SRM dual RC 79
Plug-in
Short-Range
Modems
(SRM)
1000 Series 1000RC
High speed multipoint dual RC 811004A Series 1004ARC
High speed multipoint dual RC 81
Async SRM dual RC 79
1008 Series
1009 Series
1004ARC
1000RC
Async SRM dual RC 791005 Series 1000RC
Trans Isolated SRM dual RC 791010RC1010B Series
Async., multipoint SRM dual RC 82
Async SRM dual RC 791015 Series
1012ARC
1000RC
1012A Series
Trans Isolated SRM dual RC 791010RC1010R Series
SLIP/PPP SRM RC 851018 Series 1018RC
Trans Isolated SRM dual RC 791016 Series 1010RC
Trans Isolated SRM dual RC 791017 Series 1010RC
57.6 Async./Sync. SRM RC 88
57.6 Async./Sync. SRM RC 88
57.6 Async./Sync. SRM RC 88
32, 56 & 64 kbps Async./Sync. SRM RC 85
57.6 Async./Sync. SRM RC 88
32, 56 & 64 kbps Async./Sync. SRM RC 85
1020 Series
1025 Series
1030 Series
1035 Series
1040 Series
1045 Series
1080ARC
1080ARC
1080ARC
1045RC
1080ARC
1045RC
Trans Isolated SRM dual RC 791019 Series 1010RC
Rack Card (RC) Description
(Configuration) Page
Standalone
Model
Compatible
Rack Card
Rack Card (RC) Description
(Configuration)
Page
Standalone
Model
Compatible
Rack Card
1110A Series 1110ARC Fiber SRM RC
2016 Series
2085 Series
2089 Series
2066RC
2085RC
2085RC
CCITT V.35 to X.21 Converter w/Buffer
RS-232 to RS-485 Converter dual RC
RS-232 to RS-485 Converter dual RC
2020 Series 2020RC CCITT V.35 to RS-232 Converter RC
1205 Series
1206 Series
1205RC
1206RC
V.35 Sync. Modem Eliminator RC
X.21 Sync. Modem Eliminator RC
Converters
& Modem
Eliminators
Fiber
Modems
1140A Series 1140ARC Fiber Optic Modem w/V.54 Diagnostics
222N Series 222NRC RS-232 to RS-422 Converter dual RC
222N9 Series 222NRC RS-232 to RS-422 Converter dual RC
2703 Series 2703RC 2 Mbps G.703 Modem Access Converter
92
92
49
54
54
50
91
91
56
56
41
115.2 Async. SRM RC 86
115.2 Async. SRM RC 86
Sync. SRM RC 87
57.6 Async./Sync. SRM RC 88
1050 Series
1060 Series
1070 Series
1080A Series
1060RC
1060RC
1070RC
1080ARC
Powered
Short-Range
Modems
(SRM)
Device
type
Device
type
SPECIFICATIONS
Environmental
Op. Temp.: 32–122°F (0–50°C)
Humidity: 5–90%, non-condensing
24 VDC Power
Input Voltage: 18–36 VDC
Input Current: 2A Max at 18 VDC
Surge Protection: Triggered at
39 VDC
Output Voltage: 12 VAC at 2A
Output Power: 24 W
LED indicators: Power,DC Input
48 VDC Power
Input Voltage: 40–60 VDC
Input Current: 1A Max at 40 VDC
Surge Protection: Triggered at
75 VDC
Output Voltage: 12 VAC at 2A
Output Power: 24 W
LED indicators: Power, DC Input
120 VAC Power
Input Voltage: 100–230 VAC
Input Current: 400 mA
Output Voltage: 10 VAC at 2.4 A
Output Power: 24 W
LED indicator: Power
220 VAC Power
Input Voltage: 200–240 VAC
Input Current: 200 mA
Output Voltage: 10 VAC at 2.4 A
Output Power: 24 W
LED indicator: Power
CATALOG
Network Access & Connectivity
CONNECTIVITY—MINI-RACK PRODUCTS
MINI-RACK & CLUSTER-BOXES
226
visit us online
www.patton.com
FAST Delivery From Your AUTHORIZED DISTRIBUTOR!
ORDERING INFORMATION
Pre-Configured Rack Assemblies
Example 19-in. 2U rack chassis
1000R16P/120K: 120 VAC power module (includes power cord
for U.S.A.)
1000R16E/230D: CE compliant, 230 VAC power module (includes
power cord for U.K.)
1000R16P/230G: 230 VAC power module (includes power cord
for India)
1000R16P/48V:48 VDC Power Supply
1000R16P/24V: 24 VDC Power Supply
Example Desktop ClusterBoxes
™
1000CU2P/120K: 2-Slot Cluster Unit with 120 VAC power module
(includes power cord for U.S.A.)
1000CU2E/230D: 2-Slot Cluster Unit with CE compliant,230 VAC
power module (includes power cord for U.K.)
1000CU2P/48V:2-Slot Cluster Unit with 48 VDC Power Supply
Rack System Parts
Empty Rack
1000R16P: 19-in.16-Slot Rack Chassis Sub-Assembly
Empty Cluster Chassis
1000CU2: ClusterBox-II 2-Slot Desktop Cluster Sub-Assembly
1000CU4: ClusterBox-IV 4-Slot Desktop Cluster Sub-Assembly
1000CU8: ClusterBox-VIII 8-Slot Desktop Cluster Sub-Assembly
Rear Power Entry Modules
1000RPEM-DC: DC Rear Power Entry Module
1000RPEM-RDC: DC Redundant Rear Power Entry Module
1000RPEM: Standard 120/230 VAC Rear Power Entry Module
1000RPEM-V
: CE Compliant 120/240 VAC Rear Power
Entry Module
Front Power Supply Modules
1000RPSM-2: 120/230 VAC Front Power Supply Module
1000RPSM-V: CE Compliant Front Power Supply Module
1000RPSM-48A: 48 VDC Front Power Supply Module
1000RPSM-R48A: 48 VDC Redundant Front Power Supply Module
(2 Required)
1000RPSM-24A: 24 VDC Front Power Supply Module
1000RPSM-12A: 12 VDC Front Power Supply Module
Power cord sets
0805US:“K”American Power Cord
0805EUR: “A” European Power Cord CEE 7
0805UK: “D” United Kingdom Power Cord
0805AUS:“C”Australia Power Cord
0805DEN:“E” Denmark Power Cord
0805FR:“F” France/Belgium Power Cord
0805IN: “G” India Power Cord
0805IS:“H” Israel Power Cord
0805JAP: “J” Japan Power Cord
0805SW:“L” Switzerland Power Cord
Spare parts, hardware, fuses, panels
05R16FPB1: Single-width Blank Front Panel
05R16FPB4: 4-Slot-Wide Blank Front Panel
05R16RPB1: Single-Width Blank Rear Panel
05R16RPB4: 4-Slot-Wide Blank Rear Panel
0821R4: Fuse,0.4A (5x20mm)
0821R2: Fuse, 0.2A (5x20mm)
056S1: 16 #4 pan head screws & washers
Factory part number encoding
Power Cord Code
(see power cord description,
A–Z at right)
Factory Power Configuration
(120 = 120 VAC, 230 = 230 VAC
48V = 48 VDC)
Approvals Designation
(P = Standard, E = European
CE Marked Configuration)
Chassis Type
(R16 = 16-Slot 19-in. Rack,
CU2 = 2-Slot Cluster, CU4 = 4-Slot
Cluster, CU8 = 8-Slot Cluster)
1000XXX Z/ XXX X
1000CU2—Our 2-Slot ClusterBox™ has about the same
footprint as a standalone box, but gives you the flexibility of
a rack.
1000CU4—Our 4-slot ClusterBox™ is perfect for an office
or workgroup connection. It services four to eight devices
1000CU8—When you don’t need a full rack, our 8-slot
ClusterBox™ gives you the power of up to 16 short hauls or
converters in a single enclosure.
227
CONNECTIVITY—MINI-RACK PRODUCTS
MINI-RACK & CLUSTER-BOXES
visit us online
www.patton.com
FAST Delivery From Your AUTHORIZED DISTRIBUTOR!
Network Access & Connectivity
CATALOG
I’m Brian, one of Patton’s Product
Validation Engineers who makes
sure your mini-rack product
works reliably. To buy one of
these state-of-the-art devices, call
+1 301.975.1000 or send email to sales@patton.com.
CATALOG
Network Access & Connectivity
FEATURES & BENEFITS
Multi-Functionality—Supports NTUs, xDSL Modems, Short
Range Modems, and Ethernet Extenders.
Independent Slots—Up to 10 independently operating
slots to completely do away with any single point
of failures.
Rackmount—Both Universal Mounting Panels fit into any
19-in. rack. The 10-slot panel is only 4U (7 in./17.78
cm) high. The 2-slot is 1.5U (2.63 in./6.68 cm) high.
Cost-Effective—Rack-mount products you have
already purchased.
10 and 2-Slot Universal Mounting Panels
Models 1001MP10 & 1001MP2
Rack, stack, and organize up to 10 Patton devices with these multi-functional mounting panels.
CONNECTIVITY—19-inch RACK PRODUCTS
UNIVERSAL MOUNTING PANELS
228
The Model 1001MP10 Universal Mounting Panel offers the
ability to rack up to 10 Patton products side by side.
Products that are compatible with the 1001MP10 and
1001MP2 include Ethernet Extenders, xDSL modems, short
range modems, NTUs, and much more!
The Model 1001MP10’s sturdy 4U design easily installs into
any standard 19-inch rack. A combination of a unique
groove system and an easily installed back panel enables
the 1001MP10 to securely lock the individual Patton
modems and their power supplies. For lower density applications, the Model 1001MP2 offers a 1.5U-high, 2-slot panel.
The Model 1001MP series offers a convenient method for
converting your favorite Patton standalone product into a
rack-mounted solution.
visit us online
www.patton.com
ORDERING INFORMATION
1001MP2: 19-in.Horizontal 2-Slot Rack
1001MP10: 19-in.Vertical 10-Slot Rack
SPECIFICATIONS
1001MP10
Front Panel: 10 independently operating slots
Dimensions: 19 L x 6.75 W x 7 H
in. (48.3 L x 17.15 W x17.78 H cm)
Weight: 4.15 lbs (1.90 kg)
1001MP2
Front Panel: 2 independently operating slots
Dimensions: 19.0 W x 2.63 H x 1.9
D in. (48.3 W x 6.68 H x 4.8 D cm)
Weight: 2 lbs (0.95 kg)
FAST Delivery From Your AUTHORIZED DISTRIBUTOR!
Model 1001MP2
Model 1001MP10
1001MP10 rear view
10 rear slots for
device power supplies
Patton Product Compatibility Table
1082: iDSL Modem
3088: G.SHDSL Modem
3201: 2.3 Mbps G.SHDSL Router
3241: 4.6 Mbps G.SHDSL Router
1068: VDSL Modem
2113: T-Link E1 Extender
2115: T-Link T1 Extender
2701 Series: G.703/G.704 FE1/E1 NTU
2707 Series: G.703 Clear Channel E1 NTU
2720 Series: T1/FT1 NTU
2155: 144 kbps CopperLink Extender
2156: 2.3 Mbps CopperLink Extender
2157: 4.6 Mbps CopperLink Extender
2158: 10 Mbps CopperLink Extender
2168: 16 Mbps CopperLink Extender
2172: 50 Mbps CopperLink Extender
1060: RS-232 115.2 kbps Asynchronous SRM
1070: RS-232 19.2 kbps Synchronous SRM
1080A: RS-232 57.6 kbps Async/Sync SRM
1080A-64: RS-232 64 kbps Async/Sync SRM
1226: Parallel 115.2 kbps SRM
1075: X.21 64 kbps Sync SRM
1226: RS-232 38.4 kbps Async SRM
xDSL Modems E1/T1 Network Extenders E1/T1 NTU Ethernet Extenders Serial Short-Range Modems
I’m John, one of Patton’s Product Group
Managers. If you do not find what you
need at www.patton.com or in
this catalog please call me at
+1 301.975.1000, x160.
You can also send e-mail to
jgrant@patton.com.
The Model 1001MP16 Universal Mounting Panel offers the
ability to rack-mount any of Patton's MicroPak products sideby-side. Products that are compatible with the 1001MP16
include Device servers, Media converters, Ethernet bridges,
Fiber modems, Interface converters, and many more!
The sturdy 2U design of the 1001MP16 enables quick and
hassle-free installation into any standard 19-inch rack. The
1001MP16's unique bracket-and-groove mounting system
enables Patton MicroPak cases to be mounted securely into
the panel. Dry-erase labels and individually numbered ports
are provided for easy circuit/port identification.
The Model 1001MP16 provides an economical method for
converting your favorite Patton standalone MicroPak products into a customized rack-mounted solution.
460
2135
Rack-Mount any of Patton’s MicroPak Products
2120
1206
3/11 Data Tap
229
16-Slot Universal Mounting Panel
Model 1001MP16
Rack, stack, and organize with Patton’s Multi-Functional Universal Mounting Panel. Rack up
to 16 Patton MicroPak Devices into a dense 2U solution.
CONNECTIVITY—19-inch RACK PRODUCTS
UNIVERSAL MOUNTING PANELS
visit us online
www.patton.com
FEATURES & BENEFITS
Mount any MicroPak—Supports media converters, terminal
servers, Ethernet bridges, fiber modems, CSU/DSUs, interface converters, short haul modems, and surge protectors
Low Profile-2U High—Universal Mounting Panel is only
2U (3.5 in. or 8.9 cm) high and holds up to 16
MicroPaks; Installs quickly into any standard 19 inch rack
Dry-erase label blocks and port identification numbers for
easy circuit identification
Cost Effective—Adapt Patton MicroPak products you
already own for use in a standard 19 inch rack, thereby
eliminating the expense of upgrading to rackmounted equipment
ORDERING INFORMATION
1001MP16: 19-inch,16-Slot Mounting Panel
1001MP-PS8: 8-Barrel 5V, 4A Power Supply
SPECIFICATIONS
Front panel: 16 Operationally independent slots
Dimensions: 19L x 1.5W x 3.8H in.
(48.3L x 3.8W x 8.9H cm)
Weight: 1.1 lbs (0.5 kg)
Latching: 16 individual steel clips
with hardware (Included with unit)
Power: None required.Some units may
require individual power supplies
FAST Delivery From Your AUTHORIZED DISTRIBUTOR!
Network Access & Connectivity
CATALOG
Patton Product Compatibility Table
Unique bracket-and-groove system fastens the MicroPak
securely into the panel
Back View
Ethernet Bridges
Modem Eliminators
Serial/Parallel
Converters
Surge Protectors
CSU/DSUs
Data Taps
VoIP Micro-ATAs & AFAs
M-ATA M-AFA
1104 Series
2016 Series
2021 Series
2040 Series
2041 Series
2042 Series
2086 Series
2070 Series
2702 Series
2090 Series
2094 Series
2121 Series
2124 Series
2130 Series
2135C Series
2135 Series
460 Series
462 Series
463 Series
465 Series
470 Series
471 Series
472 Series
1205 Series 1206
3/11 3/45
2710 Series
2711 Series
2715 Series
2400 Series
503PC
534 Series
547 Series
570 Series
580 Series
552 Series
2026P 2036P
2120 Series 2120/A9
1000R Series
1007 Series
1010R Series
1012AR Series
1017 Series
1052 Series
Interface Converters
Baluns
Serial Modems
and many
more...
Device Servers
Loading...