DMX512 Distribution Solved
• Professional gear
• Rugged rack-mountable units with wall-mount
and truss-mount options
• Contractor-friendly installation enclosures
• Support for ANSI E1.20 Remote Device Management
• Modular receptacles and faceplates
• Receptacles with IDC termination options for CAT5/
CAT6 signal wiring
YOU WON’T
FIND ANY
SHOWSTOPPERS
HERE.
DMX Repeater Pro – Ethernet-type intelligence
for DMX-only networks
• 1 primary input port
• 8 bi-directional output ports
• Cascade multiple repeaters, regardless of mode
• 3 operating modes
RDM Mode
• Seamless handling of DMX512 and RDM packets
• Front panel provides basic RDM controller functions over
downstream responders
• Port-by-port RDM enable/disable
Hub Mode
• Automatically senses which bi-directional port is receiving DMX512
• Routes incoming signal to other ports
• Eliminates the need for manual patch bays
Merge Mode
• Automatically senses which bi-directional port is receiving DMX512
• HTP merge with primary input port
• Ideal for incorporating guest consoles and roaming remote focus units
• Connectors on front or rear panel
• RJ45 Ethercon option
• Cast enclosure stands up to touring abuse
• Rack-mount ears standard
• Optional wall-mount and truss-mount kits
DMX Repeater – The industry standard for
construction, features and reliability
• 1 primary input
• 1 passive THRU port
• 8 output ports
• Port-by-port power and signal indicators
• 250V protection per port with self-resetting fuses
• Spare transceiver chip included
Modular Receptacles
• Decora-style faceplates and receptacles
available from stock
• Single-gang to six-gang for standard back boxes
customizable in any combination
• Stainless steel, white and black finish options
• All the commonly used XLR and RJ45 Ethercon
connectors
• Pluggable terminal strip connectors on back
• Rear IDC connectors available on some modules
for CAT
5/CAT6 signal wire
eDIN Installation Repeaters
Factory Assembled
Contractor Friendly
• NEMA 1 enclosures
• Designed for permanent installation
• Standard conduit knockouts
• Pluggable terminal block connections
• DMX512-only or DMX512/RDM
• 1 to 4 inputs
• 4, 8, 12 or 16 outputs
• ETL-listed
• Compatible with other eDIN modules and enclosures
Pass Thru Connector
• Allows multiple connection points on a single
DMX
512 wire run
• Pushbutton switch chooses between loop out-and-
back or signal-thru at the connector location
• Replaces jumpers and pigtails that get lost or broken
• Suitable for both IN and OUT lines
A pioneer in entertainment lighting, Pathway Connectivity
is renowned for solid, easy-to-use equipment with
comprehensive, robust features.
Our reputation for innovation and reliability is based on over
twenty-five years commitment to enhancing the functions
and interoperability of lighting systems around the world.
For more info, visit
www.pathwayconnect.com
#103-1439 17 Avenue SE
Calgary AB Canada T2G 1J9
T 403.243.8110
F 403.287.1281
©2014-2015 Acuity Brands Lighting, Inc. All rights reserved.
Rev. 09/15 PW_2141
Loading...