Page 1
PATHPORT 4-PORT GATEWAY, eDIN
#6824
Job Name:
Date: Notes:
Catalog #:
PRODUCT OVERVIEW
Pathport 6824 4-Port DMX/RDM gateway is a compact gateway for
encoding, routing and decoding DMX512 data over a standard
Ethernet network. In addition to DMX, the Pathport 4-Port supports RDM
discovery and configuration data transport.
DIN-rail mountable for fast installation in existing cabinets, or also
available as part of a complete ETL-listed assembly.
FEATURES
• Four DMX512 ports - user configurable as input or output
• E1.11 DMX512A and E1.20 Remote Device Management (RDM)
compliant
• LED indicators for port direction, processor activity, Ethernet link
activity and Identify
• Operates on 802.3af Power-over-Ethernet or on a 24-48V wide-
range DC input
• Pluggable screw terminal connector block for power IN
• Two sets of pluggable terminal blocks for all DMX512 connections
to support both shielded twisted pair and Cat5/6
• Supports the following DMX/Ethernet protocols:
• Art-Net
• E1.31 streaming ACN (sACN)
• Pathport Protocol
• Strand Shownet
• Fully compatible with all Pathport gateways and eDIN interfaces
• Configuration is set using Pathscape, a free download from
pathwayconnect.com
• Soft patch allows mix-and-match of different protocols
• Route DMX according to universe or channel-by-channel
• Multiple sources may be merged and/or prioritized
• Fully customize DMX output universes
• MicroSD card allows configuration to be archived and/or copied to
another 6824
• Contact closure input (features added in future firmware updates)
SPECIFICATIONS
• PoE-powered device; Class 2
• Auxiliary input voltage 24-48VDC
• 7W Max power consumption
• 60V protection on all ports
• 1000V isolation between ports
• Operating Conditions: 14°F-118°F (-10°C to 48°C);
10-90% relative humidity, non-condensing
STANDARDS COMPLIANCE
• USITT DMX512 - 1990 / ANSI E1.11 DMX512-A R2013
• E1.20 RDM - Remote Device Management
• RoHS 2011/65/EU
• Class 2 Low Voltage
WEIGHTS AND DIMENSIONS
• 0.4 lbs (0.18 kg)
• 8.0”W x 4.07”H x 1.93”D (203mm x 103.4mm x 49mm)
INCLUDED FURNISHINGS
• 11” (280mm) piece of DIN rail
• Installation/Operations manual
#103 - 1439 17th Ave SE Calgary AB Canada T2G 1J9 Phone + 1 403 243 8110 orders@pathwayconnect.com www.pathwayconnect.com
© Acuity Brands Lighting Inc. All Rights Reserved Form #6824-100-REV1
1 of 3
02.06.2019
Page 2
APPLICATION RISER
Ethernet switch w/ PoE
MANAGED GIGABIT
ETHERNET SWITCH
VIA
LINK/ACT
PORT 1 PORT 2 PORT 3 PORT 4 PORT 5 PORT 6 PORT 7 PORT 8 PORT 9 PORT 10
POE
Cat5/6 Ethernet
– +
7W Max
24–48VDC
FACTORY
DEFAULT
CC1
COM
NEMA Wall Cabinet
eDIN #1105 typical
OUTPUT
OUTPUT
OUTPUT
OUTPUT
IDENTIFY
INPUT
INPUT
INPUT
INPUT
PROCESSOR
Port DPort CPort BPort A
SD CARD OK
#6824
Pathport 4-Port Gateway, eDIN
Intelligent Fixtures
NC
NC
D1+
D1-
COM
SHLD
NC
NC
D1+
D1-
COM
SHLD
NC
NC
D1+
D1-
COM
SHLD
NC
NC
D1+
D1-
COM
SHLD
DMX512
E1.20 RDM Responders
DMX512
LED Wash Lights
– +
7W Max
24–48VDC
FACTORY
Ethernet-enabled
Lighting Console
DEFAULT
SD CARD OK
PROCESSOR
OUTPUT
OUTPUT
OUTPUT
OUTPUT
IDENTIFY
INPUT
INPUT
INPUT
INPUT
Port DPort CPort BPort A
NC
NC
D1+
D1-
COM
SHLD
NC
NC
D1+
D1-
COM
SHLD
NC
NC
D1+
D1-
COM
SHLD
NC
NC
D1+
D1-
COM
SHLD
DMX512
DMX512
CC1
COM
Intelligent Fixtures
E1.20 RDM Responders
LED Wash Lights
NEMA Wall Cabinet
eDIN #1105 typical
#103 - 1439 17th Ave SE Calgary AB Canada T2G 1J9 Phone + 1 403 243 8110 orders@pathwayconnect.com www.pathwayconnect.com
© Acuity Brands Lighting Inc. All Rights Reserved Form #6824-100-REV1
2 of 3
02.06.2019
Page 3
[203.2mm]
[49mm]
Factory Default/
Fastening Mechanism designed
Contact Closure/
DIMENSIONS
#6824
Pathport 4-Port Gateway, eDIN
SHLD
OUTPUT
INPUT
COM
NCNCD1+
D1-
SHLD
4.07”
[103.4mm]
DMX PIN OUTS
XLR PIN # PURPOSE
DMX512/RDM
PINOUT:
FOR SHIELDED
TWISTED PAIR
1 Shield
2 Data - (complement)
3 Data + (true)
4 Not Used
5 Not Used
OUTPUT
INPUT
COM
D1-
DMX512 Inputs/Outputs (4)
OUTPUT
INPUT
NCNCD1+
COM
SHLD
D1-
NCNCD1+
8”
SHLD
OUTPUT
INPUT
Port DPort CPort BPort A
COM
D1-
Expansion Input
COM
CC1
NCNCD1+
microSD
Card Slot
Reset Button
FACTORY
DEFAULT
IDENTIFY
PROCESSOR
SD CARD OK
DMX512/RDM
PINOUT:
FOR CAT 5/6
for 35 x 7.5mm DIN Rail
24-48 VDC
– +
24–48VDC
7W Max
Power Input
Use eDIN 1001 power
supply or equal.
Connect earth ground to
protect DMX ports from
RF interference carried
on cable shield.
Female RJ45
Ethernet connector
1.93”
XLR PIN # CAT5/6 Pin # and Color PURPOSE
3 1 - White/Orange Data 1 + (true)
2 2 - Orange Data 1 - (complement)
5 3 - White/Green Not Used
4 6 - Green Not Used
- 4 - Blue Not Used - do not connect
- 5 - White/Blue Not Used - do not connect
1 7 - White/Brown Shield/COM
1 8 - Brown Shield/COM (not used with IDC)
ORDERING INFORMATION
PART # DESCRIPTION
6824 Pathport 4-Port DMX/RDM Gateway, eDIN (8”)
ACCESSORIES
1001-050-24-DIN 50 Watt, 24VDC Power Supply, DIN-Mountable
1103 eDIN Rack Mount Panel, 2RU high, two 16.5” DIN Rail
1105 eDIN System Enclosure, 10” x 13” x 4.5” c/w One 9” Vertical DIN Rail
1106 eDIN System Enclosure, 10” x 23” x 4.5” c/w One 19” Vertical DIN Rail
1107 eDIN System Enclosure, 10” x 23” x 4.5” c/w Three 9” Horizontal DIN Rail
1108 eDIN System Enclosure, 10” x 13” x 4.5” c/w Two 9” Horizontal DIN Rail
1109 Expanded eDIN System Enclosure, 18.5” x 31.5” x 6.5” c/w Three 24” Vertical DIN Rail, One 18” DIN Rail in Class 1
#103 - 1439 17th Ave SE Calgary AB Canada T2G 1J9 Phone + 1 403 243 8110 orders@pathwayconnect.com www.pathwayconnect.com
© Acuity Brands Lighting Inc. All Rights Reserved Form #6824-100-REV1
02.06.2019
3 of 3
Loading...