Page 1
PATHPORT 1-PORT GATEWAY, eDIN
#6821
Job Name:
Date: Notes:
Catalog #:
PRODUCT OVERVIEW
Pathport 1-Port DMX/RDM gateway is a compact node for encoding,
routing and decoding DMX512 data over a standard Ethernet network.
In addition to DMX, the Pathport 1-Port supports RDM discovery and
configuration data transport.
DIN-rail mountable for fast installation in existing cabinets, or also
available as part of a complete ETL-listed assembly.
FEATURES
• One DMX512 port - user configurable as input or output
• E1.11 DMX512A and E1.20 Remote Device Management (RDM)
compliant
• LED indicators for port direction, power, Ethernet link activity and
identify
• Operates on 802.3af Power-over-Ethernet or on an 18-48V wide-
range DC input
• Pluggable screw terminal connector block for power IN and OUT
• Two sets of pluggable terminal blocks for all DMX512 connections
to support both shielded twisted pair and CAT5/6
• Supports the following DMX/Ethernet protocols
• Art-Net
• E1.31 streaming ACN (sACN)
• Pathport Protocol
• Strand Shownet
• Fully compatible with all Pathport gateways and eDIN interfaces
• Configuration is set using Pathscape, a free download at www.
pathwayconnect.com
• Soft patch allows mix-and-match of different protocols
• Route DMX according to universe or channel-by-channel
• Multiple sources may be merged and/or prioritized
• Fully customize DMX output universes
• On-board option to hard-patch to Universe 1, 2, 3 or 4
SPECIFICATIONS
• PoE-powered Class 1 device, 4W max power consumption
• Auxiliary input voltage, 18-48V
• 60V protection on each port
• 10Mb TCP/IP connection
• Operating Conditions: 14°F-118°F (-10°C to 48°C);
10-90% relative humidity, non-condensing
STANDARDS COMPLIANCE
• ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
• ANSI E1.20 RDM(2010) - Remote Device Management
• RoHS 2002/95/EC
• Class 2 Low Voltage
WEIGHTS AND DIMENSIONS
• 0.4 lbs (0.18 kg)
• 4.5”W x 4”H x 1.9”D (113mm x 103mm x 48mm)
INCLUDED FURNISHINGS
• DIN tray (housing) with end caps
• 11” (280mm) piece of DIN rail
• Installation/Operations manual
#103 - 1439 17th Ave SE Calgary AB Canada T2G 1J9 Phone + 1 403 243 8110 orders@pathwayconnect.com www.pathwayconnect.com
© Acuity Brands Lighting Inc. All Rights Reserved Form #6821-100-REV1
1 of 3
02.07.2019
Page 2
Dimmer Cabinet
NEMA Wall Mount Enclosure
Ethernet Switch With /PoE
APPLICATION RISER
Standard Ethernet Layout
#6821
Pathport 1-Port Gateway, eDIN
Architectural Preset System
DMX512
AUX POWER IN
18 - 48VDC
DMX
#6821
3 WATT
532 41
NETWORK LINK
DMXOUTPUT
DMX INPUT
GROUND
EARTH
V+
V-
CK
ETHERNET
1 42 3 5
SHLD
COM
D1-
D2-
D2+
D1+
DMX IN/OUT
Pathport eDIN
1 2 3 4
1
UNIVERSE SELECT
ON
2
ALL OFF FOR
3
SOFTWARE CONFIG
4
Pathport Gateway
Lighting Console
VIA
MANAGED GIGABIT
ETHERNET SWITCH
LINK/ACT
PORT 1 PORT 2 PORT 3 PORT 4 PORT 5 PORT 6 PORT 7 PORT 8 PORT 9 PORT 10
Ethernet
V+
V-
POE
NEMA Wall Mount Enclosure
Pathport eDIN
1 2 3 4
NEMA Wall Mount Enclosure NEMA Wall Mount Enclosure
Pathport eDIN
1 2 3 4
Pathport eDIN
1 2 3 4
1 42 3 5
NETWORK LINK
DMX INPUT
SHLD
COM
D1-
D2-
D2+
D1+
DMX IN/OUT
1
UNIVERSE SELECT
ON
2
ALL OFF FOR
3
SOFTWARE CONFIG
4
#6821
Pathport Gateway
1 42 3 5
NETWORK LINK
DMX INPUT
SHLD
COM
D1-
D2-
D2+
D1+
DMX IN/OUT
1
UNIVERSE SELECT
ON
2
ALL OFF FOR
3
SOFTWARE CONFIG
4
#6821
Pathport Gateway
1 42 3 5
NETWORK LINK
DMX INPUT
SHLD
COM
D1-
D2-
D2+
D1+
DMX IN/OUT
1
UNIVERSE SELECT
ON
2
ALL OFF FOR
3
SOFTWARE CONFIG
4
#6821
Pathport Gateway
DMXOUTPUT
DMXOUTPUT
DMXOUTPUT
DMX512
AUX POWER IN
18 - 48VDC
3 WATT
532 41
GROUND
EARTH
V+
V+
V-
V-
ETHERNET
AUX POWER IN
18 - 48VDC
3 WATT
532 41
GROUND
V+
V-
ETHERNET
AUX POWER IN
18 - 48VDC
3 WATT
532 41
GROUND
V+
V-
ETHERNET
DMX512
EARTH
V+
V-
Intelligent LightsIntelligent Lights
DMX512
EARTH
V+
V-
LED Wash Lights
LED Wash Lights
#103 - 1439 17th Ave SE Calgary AB Canada T2G 1J9 Phone + 1 403 243 8110 orders@pathwayconnect.com www.pathwayconnect.com
© Acuity Brands Lighting Inc. All Rights Reserved Form #6821-100-REV1
2 of 3
02.07.2019
Page 3
for 35 x 7.5mm DIN rail
[49mm]
DMX512 INPUTS/OUTPUTS (2)
DIMENSIONS
#6821
Pathport 1-Port Gateway, eDIN
1 2
3
4
DMX PIN OUTS
XLR PIN # PURPOSE
DMX512/RDM
PINOUT:
FOR SHIELDED
TWISTED PAIR
LED INDICATORS
DMX INPUT
NET LINK/ACT
NCNCD1+
COM
SHLD
D1-
DMX IN/OUT
+3V PS
+5V PS
ON
1
UNIVERSE SELECT
2
ALL OFF FOR
3
SOFT CONFIG
4
Universe
Select
Ethernet Connector
4.5”
[113mm]
Female RJ45
1 Shield
2 Data - (complement)
3 Data + (true)
4 Not Used
5 Not Used
18 - 48 VDC
MAX 3 WATTS
DMX OUTPUT
AUX POWER IN
V+
V-
GND
EARTH
ETHERNET
802.3af POE
POWER IN (If PoE not in use):
18-48VDC, 4W Supply required.
Use #1001-100-48-DIN PSU or equal.
V-
V+
4”
[103mm]
DMX512/RDM
PINOUT:
FOR CAT 5/6
Fastening mechanism designed
1.9”
XLR PIN # CAT5/6 Pin # and Color PURPOSE
3 1 - White/Orange Data 1 + (true)
2 2 - Orange Data 1 - (complement)
5 3 - White/Green Not Used
4 6 - Green Not Used
- 4 - Blue Not Used - do not connect
- 5 - White/Blue Not Used - do not connect
1 7 - White/Brown Shield/COM
1 8 - Brown Shield/COM
PART # DESCRIPTION
6821 Pathport 1-Port Gateway, eDIN
ACCESSORIES
1001-100-48-DIN 100 Watt, 48VDC Power Supply, DIN-Mountable
1103 Rack-mount Panel Kit (2RU) with two 16.5” (420mm) sections of DIN rail
1105 Small eDIN Enclosure (NEMA1) with 9.5” (240mm) of vertical DIN rail
1106 Large eDIN Enclosure (NEMA1) with 19.5” (495mm) of vertical DIN rail
1107 Large eDIN Enclosure (NEMA1) with three rows of 9.5” (240mm) horizontal DIN rail
1108 eDIN System Enclosure, 10” x 13” x 4.5” c/w Two 9” Horizontal DIN Rail
1109
Expanded eDIN System Enclosure 18.5” x 31.5” x 6.5” c/w Three 24”Vertical DIN Rail, One 18” DIN Rail in Class 1
section, two 3-gang knockouts in removable door
4000 eDIN Enclosure Assembly Service
#103 - 1439 17th Ave SE Calgary AB Canada T2G 1J9 Phone + 1 403 243 8110 orders@pathwayconnect.com www.pathwayconnect.com
© Acuity Brands Lighting Inc. All Rights Reserved Form #6821-100-REV1
3 of 3
02.07.2019
Loading...